• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.10 s.352
• /
• pp.35-45
• /
• 2006

Coordinator is defining so that function as most trust center that is point in security in ZigBee Alliance. Because must do height connection with coordinator in device signing to PAN newly, coordinator has shortcoming that subordinate is revealed to danger directly to Centered and cattish device. When do height connection some device, do not become problem, but if network is huge, coordinator's subordinate shall increase as traffic quantity which happen in coordinator increases. Also, in ZigBee security to link network kina of transmission and mutually certification in ZigBee Alliance standard include, but I do not provide method to deliver master key in each node safely. Because process that transmit master key passes through channel that do not secure, master key has shortcoming that is revealed directly. In this paper, I suggested Parent-Child key establishment algorithm to solve these problem. Proposed algorithm consists of two structures. Master key establishment algorithm and device that sign to PAN newly that can use one-way Hash chain and transmit master key safety are consisted of Parent-Child network key establishment algorithm that do child node and parent node key establishment as can do key establishment efficiently. Method that device proposes in case method that propose in case have master key establishment time was shown better performance $200{\sim}1300ms$ than existing method, and device does not have master key than existing method height connect time about $400{\sim}500ms$ better performance see.

• The Journal of the Korea Contents Association
• /
• v.22 no.6
• /
• pp.557-566
• /
• 2022

The purpose of this study is to understand the correlation between Master Jin Bodhi and practicing Medicine Buddha, and to examine the concept and value of the method of asceticism related to practicing Medicine Buddha. Accordingly, as a result of collecting and analyzing a wide range of literature data on Master Jin Bodhi, Master Jin Bodhi was able to capture and present various historical sources of using various method of asceticism based on practicing Medicine Buddha. In addition, the concept and value of the method of asceticism about The Method of Great Illuminated Asceticism, Throwing Five Parts of the Body, and Energy Bagua were considered and presented as representative practices among the various practices taught to modern people in physical and mental weaknesses across the world. This study is of academic significance in that it clearly distinguishes the concepts and unique values of each of the The Method of Great Illuminated Asceticism, Throwing Five Parts of the Body, and Energy Bagua based on the results of the correlation between Master Jin Bodhi and practicing Medicine Buddha. Nevertheless, this study did not fully reveal the historical causality of the process of expanding Master Jin Bodhi's method of asceticism related to practicing Medicine Buddha, and has limitations in not considering the concept and value of the method of asceticism other than the The Method of Great Illuminated Asceticism, Throwing Five Parts of the Body, and Energy Bagua. Specific methods for further research were suggested.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.2
• /
• pp.70-75
• /
• 2014

Recently, the demand for high-integrated, low-powered, and high-powered SoC design has been increasing due to the multi-functionality and the miniaturization of digital devices and the high capacity of service informations. With the rapid evolution of the system, the required hardware performances have become diversified, the FPGA system has been increasingly adopted for the rapid verification, and SoC system using the FPGA and the ARM core for control has been growingly chosen. While the AXI bus is used in these kinds of systems in various ways, it is traditionally designed with AXI slave structure. In slave structure, there are problems with the CPU resources because CPU is continually involved in the data transfer and can't be used in other jobs, and with the decreased transmission efficiency because the time not used of AXI bus beomes longer. In this paper, an efficient AXI master interface is proposed to solve this problem. The simulation results show that the proposed system achieves reductions in the consumption clock by an average of 51.99% and in the slice by 31% and that the maximum operating frequency is increased to 107.84MHz by about 140%.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.3
• /
• pp.74-80
• /
• 2012

Recently at SCIS2011, Nakatsu et. al. proposed multi-round Correlation Power Analysis(CPA) on Hardware Advanced Encryption Standard(AES) to improve the performance of CPA with limited number of traces. In this paper, we propose, Multi-Round CPA to retrieve master key using CPA of 1round and 2round on Hardware DES. From the simulation result for the proposed attack method, we could extract 56-bit master key using the 300 power traces of Hardware DES in DPA contes. And it was proved that we can search more master key using multi-round CPA than using single round CPA in limited environments.

• Journal of the Korean Professional Engineers Association
• /
• v.15 no.1
• /
• pp.46-50
• /
• 1982

Following rapid industrial development and urbanization in Korea, there is a need for the Government to implement effective control of pollution and to undertake specific schemes in areas where pollution of the environment is severe. In response to this need, Government of Korea prepare Han River Basin Environmental Master Plan Project for water, air, solid waste to cover environmental protection of the Han River Basin. The Project area is approximately 27,000 sq. Km extending over Seoul, Kyunggi, Kwangwon, Chungbuk Province. The total population of Master Plan Project area is approximately 11.6 million, or one-third of the total population of Korea. There are about 8,000 industries, including those located in 16 industrial complexes, in the project area. The scope of work and terms of reference are the following: (1) A Summary of existing land use and forecasts for changes in land use by the year 2,000. (2) Emission inventories for air, waste water, and solid wastes. (3) Forecasts of future population growth patterns and pollution loadings. (4) Identification of specific projects needs to reduce pollution levels and satisfy the environmental quality standards. (5) A Program of enforcement to include (i) self monitoring, and (ii) governmental inspections and surveillance. (6) A program for quality improvement and quality assurance of environmental measurements. (7) Reports summarizing all data collected analyzed during the study. (8) Conceptual design and feasibility studies, including cost estimates, for needed pollution control projects. (9) A financial plan for future detailed design and construction of public facilities, for financial incentives to industry, and for user charges for industrial use of public treatment of disposal works.

• Journal of Powder Materials
• /
• v.21 no.1
• /
• pp.7-15
• /
• 2014

This study investigated the densification behavior of rhenium alloys including W-25 wt.%Re and Re-2W-1Ta (pure Re) during sintering. The dilatometry experiments were carried out to obtain the in-situ shrinkage in $H_2$ atmosphere. The measured data was analyzed through shrinkage, strain rate and relative density, and then symmetrically treated to construct the linearized form of master sintering curve (MSC) and MSC as a well-known and straightforward approach to describe the densification behavior during sintering. The densification behaviors for each material were analyzed in many respects including apparent activation energy, densification parameter, and densification ratio. MSC with a minimal set of preliminary experiments can make the densification behavior to be characterized and predicted as well as provide guideline to sinter cycle design. Considering the results of linearized form and MSC, it was confirmed that the W-25 wt.%Re compared to Pure Re is more easily densified at the relatively low temperature.

• Journal of Welding and Joining
• /
• v.33 no.6
• /
• pp.49-54
• /
• 2015

Welding process is of importance to assemble products or structures, but also the process is structural weakness due to stress concentration in welding joint. The fatigue design of welded joint requires time & labor consuming fatigue test because the fatigue life is various according to the depth of joint, joint type and load type etc. In fatigue design codes, they guide to classify welding joints with their shape( BS7608, IIW Documents) and provide fatigue assessment information. In terms of numerical method for fatigue analysis, it is also difficult to decide the stress peak in joint because of mesh sensitivity which means that stress value is varies with element type or size on stress concentration zone. Hot-spot method is used generally, but Battelle of United States proposed Master S-N Curve based on structural stresses converted by mechanical equilibrium theory. In this research, we extracted master S-N curve from Battelle's fatigue test DB including test data of various welding joints to apply on Non-Load-Carrying cruciform Joint. Comparing fatigue results between the case of using normal stress and case of structural stress cor the cruciform Joint, The suggested Battelle method showed successive results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.270-275
• /
• 2008

The straight bevel gear for automobile part has been manufactured by the cold forging instead of the gear machining tool for the mass production. The application to CAD/CAM system has been necessary in order to develop the precision product quickly by forging through the minimization of trial and error and confirm the reproducibility. In the study, the straight bevel gear with the crown teeth has been modelled by the CAD/CAM system. The master gear after the gearing test has been machined after the modelling, NC data generation and verification. The die for forging and the jig for machining has been manufactured using the master gear.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2008-2013
• /
• 2016

This paper proposes analysis and suppression method for reactive power vibration of the slave motor caused by back-EMF mismatch between the master and the slave motor and stator resistance during middle-low speed operation. The master and slave motors are parallel connected dual SPMSMs(Surface mounted Permanent Magnet Synchronous Motors) fed by a single inverter. To suppress vibration of reactive power, RPC(Reactive Power Compensator) proposed in this paper analyzes flux-axis current vibration of the slave motor that occurs in middle-low speed operation using a mathematical model of the fan motor. And RPC adds vibration components detected from flux-axis current of the slave motor to flux-axis current of the master motor. The results of experiment conducted verify the efficacy of the proposed method.

• Cross-Cultural Studies
• /
• v.35
• /
• pp.215-235
• /
• 2014

The purpose of this paper look at the basis of the cultural differences of Korean and Japan by comparing the craftsmanship. Korean craftsmanship and master craftsman making traditional handcrafts and artwork would die out at a critical moment. The craftsmanship and system could not be established because of discrimination in the traditional four classes of society( scholars, farmers, artisans and tradesmen), invasions of other countries and discontinuity of tradition from modernization. On the contrast, in Japan, it was possible to establish traditional handcrafts and artworks, technique and craftsmanship with apprentice system and various social privilege and treatment even in the same traditional four classes of society ( scholars, farmers, artisans and tradesmen). It was common to pass down the family business for a hundreds of years with self respect between Japanese master craftsmen and lots of people succeed the family business will now. Japanese craftsmanship is originated from 'worship to god' Medieval Japanese believed that the thing changes human mind, artistic talent, masterpieces and faith were connected to sacred power. Therefore, master craftsmen and their works were also made by the power of god. In this context, craftsmen were protected and treated in socially and nationally. It is that the social treatments and supports in national level and their own pride and continuous training of techniques and abilities as the main driving force to maintain the craftsmanship in Japan. Korea has the sale level of competitive tradition and technique in comparison any other countries. Japanese craftsmanship study will be a critical data in the protection and maintenance of Korean traditional and technique.