• 한국지진공학회논문집
• /
• 제5권4호
• /
• pp.27-38
• /
• 2001

반무한 호소의 동적 모델링을 위한 역학적 집중변수모델을 제안하였다. 깊이가 일정한 2차원 반무한 호소의 전달경계의 정해를 구하였다. 정해의 거동특성을 주파수 영역과 시간 영역에서 조사하였다. 고유진동수와 합성곱 적분의 핵함수인 베셀 함수의 모양 등과 같은 해의 주요 특성이 변하지 않도록 질량, 감쇠기, 스프링 계수를 구한다. 최종 집중 변수 모델은 각각의 고유값에 대해 2개의 질량, 1개의 스프링, 2개의 감쇠기로 구성된다. 적용 예제를 통하여 새로운 집중변수모델이 댐-호소계의 시간 영역 해석에 효율적으로 사용될 수 있음을 확인하였다.

• Ocean Systems Engineering
• /
• 제9권4호
• /
• pp.369-390
• /
• 2019

Herein, we present numerical simulation based model to study the use of a 'Tuned Mass Damper (TMD)' - particularly spring mass systems - to control the displacements at the deck level under seismic and ice loads for an offshore jacket structure. Jacket is a fixed structure and seismic loads can cause it to vibrate in the horizontal directions. These motions can disintegrate the structure and lead to potential failures causing extensive damage including environmental hazards and risking the lives of workers on the jacket. Hence, it is important to control the motion of jacket because of earthquake and ice loads. We analyze an offshore jacket platform with a tuned mass damper under the earthquake and ice loads and explore different locations to place the TMD. Through, selected parametric variations a suitable location for the placement of TMD for the jacket structure is arrived and this implies the design applicability of the present research. The ANSYS^*TM mechanical APDL software has been used for the numerical modeling and analysis of the jacket structure. The dynamic response is obtained under dynamic seismic and ice loadings, and the model is attached with a TMD. Parameters of the TMD are studied based on the 'Principle of Absorption (PoA)' to reduce the displacement of the deck level in the jacket structure. Finally, in our results, the proper mass ratio and damping ratios are obtained for various earthquake and ice loads.

• 한국대기환경학회지
• /
• 제24권2호
• /
• pp.162-175
• /
• 2008

Gyeongju, which was the central city of the ancient civilization at Silla Kingdom, has various kinds of stone cultural properties. It is significantly important to preserve historical sources of Korea. However, recent air quality data measured in Gyeongju did not show good air quality level. In order to investigate variation of the concentration of the air pollutants with meteorological condition, an air quality monitoring and an aerosol sampling were conducted during the intensive monitoring period in Gyeongju. Impacts of the meteorological factors on the air pollutants were also analyzed based on the air mass pathway categories using HYSPLIT model and the local wind patterns using MM5 model. The prevailing air mass pathways were classified into four categories as following; category I affected by easterly marine aerosols, category II affected by northwesterly continental aerosols, category III affected by southwesterly continental aerosols, and category IV affected by northerly continental aerosols. The concentrations of the air quality standards were relatively lower during the fall intensive monitoring period. At that time, the easterly marine air mass pattern was dominated. The seasonal average mass concentration of $PM_{10,Opt}$, which optically measured at the monitoring site, was the highest value of $77.6{\pm}28.3\;{\mu}g\;m^{-3}$ during the spring intensive monitoring period but the lowest value of $20.1{\pm}5.3\;{\mu}g\;m^{-3}$ during the fall intensive monitoring period. The concentrations of $SO_2$ and CO were relatively higher when the air mass came from the northwestern continent or the northern continent. The concentrations of ${SO_4}^{2-}$ and ${NO_3}^-$ increased under the northwesterly continental condition. It was estimated that the acidic aerosols were dominated in the atmosphere of Gyeongju when the air mass came from the continental regions.

• 한국지반공학회지:지반
• /
• 제6권1호
• /
• pp.7-14
• /
• 1990

주동단에 반력스프링이 부착된 공진주(spring-top resonant column) 시험기 주동단 불완전 고정의 영향을 연구하기 위해 2자유도 모델을 제안하였다. SYMPHONY스프레드쉿트를 이용하여 무차원주파수, F를 구할 수 있도록 전산화하였으며 이로부터 탄성계수를 구할 수 있다. F에 대한 반력 질량의 영향은 반력질량 및 시료의 질량 및 주파수에 관계되는 계수, T<20인 경우에 는 무시할 수 없음을 밝혔다. 시험기 및 시료의 질량과 주파수에 관계되는 계수, Tci가 증가함에 따라 F의 영향 역시 증가하였으나 T도 20인 경우 그 영향은 적었다. 주동단 고정을 위해서는 T, 이 20이상 되어야 함을 제안하였으며 이 경우 SDOF으로 취급할 수 있다. 시료와 시험기의 감쇠비는 F에 크게 영향을 미치지 않음도 밝혔다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.965-970
• /
• 2002

The purpose of this paper is to investigate the free vibration characteristics of tapered beams with general boundary condition(translational and rotational elastic support) at one end and carrying a tip mass with translational elastic support at the other end. The beam model is based on the classical Bernoulli-Euler beam theory which neglects the effects of rotatory inertia and shear deformation. The governing differential equation for the free vibrations of linearly tapered beams is solved numerically using the corresponding boundary conditions. Numerical results are compared with existing solutions by other methods for cases in which they are available. The lowest four natural frequencies are calculated over a wide range of section ratio, dimensionless spring constant and mass ratio.

• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3079-3094
• /
• 1996

Recently, the high-precision vibration attenuation technology becomes the essence fo the seccessful development of high-integrated and ultra-precision industries, and is expected to continue playing a key role in the enhancement of manufacturing technology. Vibration isolation system using an air-spring is widely employed owing to its excellent isolation characteristics in a wide frequency range. It has, however, some drawbacks such as low-stiffness and low-damping features and can be easily excited by exogenous disturbances, and then vibration of table is remained for a long time. Consequently, the need for active vibration control for an air-spring vibration isolation system becomes inevitable. Furthermore, for an air-spring isolation table to be successfully employed in a variety of manufacturing sites, it should have a guaranteed robust performance not only to exogenous disturbances but also to uncertainties due to various equipments which might be put on the table. In this study, an active vibration suppression control system using H.inf. theory is designed and experiments are performed to verify its robust performance. An air-spring vibration isolation table with voice-coil-motors as its actuators is designed and built. The table is modeled as 3 degree-of-freedom system. An active control system is designed based on $H_\infty$control theory using frequency-shaped weighting functions. Analysis on its performance and frequency responce properties are done through numerical simulations. Robust characteristics of$H_\infty$ control on disturbances and model uncertainties are experimentally verified through (i) the transient response to the impact excitation of the table, (ii) the steady-state response to the harmonic excitation, and (iii) the response to the mass change of the table itself. An LQG controller is also designed and its performance is compared with the $H_\infty$ controller.

• 터널과지하공간
• /
• 제12권2호
• /
• pp.107-114
• /
• 2002

터널 2차라이닝은 지반하중의 합리적인 산정기준의 부재와 보수적 경향의 지반이완하중법이 적용되고 있기 때문에 과다한 경향으로 보강되고 있는 실정이다. 2차라이닝에 고려되는 주요하중으로는 지반이완하중과 수압을 들 수 있으며, 배수터널의 경우에는 지반하중이 가장 큰 하중이 된다. 터널 주변 지반에 별도의 외력이 작용하지 않는다면, 2차라이닝에 작용하는 하중의 직접적인 원인은 1차지보재의 지지력 저하이다. 따라서, 2차라이닝의 설계시에는 지반과 1차지보재와의 상호작용을 고려한 합리적인 해석방법이 요구된다. 본 논문에서는 단순한 질량-스프링 모델을 통하여 지반-1차지보재-2차라이닝의 상호작용을 개념적 모델로 설명하였으며, 이를 원형터널에 대한 이론해석을 통하여 지반-1차지보재-2차라이닝 의 상호작용에 대한 하중전이 특성을 입증하였다. 그리고, 복잡한 터널해석조건에 대한 본 모델의 적용성을 검토하기 위하여 수치해석법의 적용성을 검증하였다.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.119-122
• /
• 1996

The case for a massive black hole in the center of the Galaxy is reassessed using improved modeling techniques and observational data. A dark mass of ${\~}{\times} 10^6$ Mo is present within 0.2 pc of the Galactic center. However, the available data can be modeled, without appealing to a massive black hole, using an extended distribution of dark stellar remnants (neutron stars and stellar mass black holes) provided that the stellar initial mass function in the central parsec is deficient in stars less massive than $\~$1 Mo. Such a situation may be a natural consequence of repeated gas build-up followed by starbursts in the central region. A clear distinction between this and the massive central black hole model cannot be made using red giant tracers outside 0.2 pc due to uncertainties in the radial velocity dispersion distribution. The cluster of massive early-type emission-line stars in the central parcsec more effectively probe the mass distribution close to Sgr A $\ast$, but their small number and partial rotational support complicate mass determinations. Proper motion determinations for stars within 0.5' of Sgr A$\ast$ may be the most effective means of unambiguously determining the mass distribution in the immediate vicinity of the Galactic center.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.504-507
• /
• 2005

This paper presents a self-levelling system for a mass, which undergoes a severe acceleration, with integrated displacement feedback control. After a general description of such a system, theoretical analysis is investigated to design an active control device. That is, the self levelling system is used to reduce the 'static' deflections while isolating the 'dynamic' vibration. A computer simulation model of 45 kg with two air spring mounts is considered to predict the performance of the control system. The results showed the controller can reduce the mass's displacement to the level of 1/3-1/5. Thus the self-levelling system can be applied usefully to reduce the dispalcement of a mass which experiences a high g dynamics.

• 소음진동
• /
• 제10권4호
• /
• pp.575-583
• /
• 2000

In this paper, we design a vibration control system that includes a 3-D.O.F. mass-spring-damper structure for the analytical model of a building that is excited at the base of this structure by an external dynamic force, and one Active Mass Damper(AMD) on the top of this structure to generate control forces fro attenuation of the structural response. Two robust controllers based on $\mu$-synthesis and H$\infty$ optimal control are designed for the structural system to show that the performance of a control system can be degraded by some parameter uncertainties such as mass, stiffness coefficients, and/or damping coefficients. The performance of the two controllers are compared in terms of nominal performance, robust stability and robust performance by simulations.