• 설비공학논문집
• /
• 제14권1호
• /
• pp.63-72
• /
• 2002

The main objective of this study is to propose a practical two-microphone impedance tube method to measure the sound transmission loss for flexible sound isolation sheets without the use of the time-consuming and expensive reverberation room. This method was based on the sound decomposition theory developed by Seybert using the spectral density functions of the incident and reflected sound waves. In order to verify the validity of the experimental results, the measured sound transmission losses from the proposed method were compared with the measured data from the reverberation room method and the calculated data from the theory satisfying the mass law of sound isolation material. The resulted trends of the sound transmission losses versus frequencies for several different sound isolation sheets were almost same for each other and agreed quite well in both methods except at some low frequency region. From the experimental results, it was found that the accuracy of sound isolation capability obtained by two-microphone impedance tube method depends upon the microphone spacing, the distance from the first microphone to the test sample surface and the test sample location.

• 한국물환경학회지
• /
• 제30권2호
• /
• pp.166-174
• /
• 2014

Velocity gradient, G, a measure of the average velocity gradient in the fluid has been applied for complete mixing of chemicals in mechanical mixing devices. G values were calculated by the power input transferred to fluid in turbulent and transient range. Chemical reactions occur so fast that total mass transfer time required for even distribution of the chemicals determine the overall reaction time. The total mass transfer time is composed of the time for complete mixing through the reactor and for diffusion of the chemicals into the eddy. Complete mixing time was calculated by CFD (computer fluid dynamics) and evaluated by tracer tests in 2 liter jars at different rotating speeds. Turbulent range, Reynolds number above 10,000 in regular 2 liter jars occurred at revolution speed above 100 rpm (revolution per minute), while laminar range occurred at revolution speed below 10 rpm. A typical range of rotating speed used in jar tests for water and wastewater treatment was between 10 and 300 rpm, which covered both transient and turbulent range. G values supplied from a commercial jar test apparatus showed big difference from those calculated with power number specially in turbulent range. Diffusion time through eddy decreased 1.5 power-law of rotating speed. Complete mixing time determined by pumping number decreased increases in rotating speed. Total mass transfer time, finally, decreases as rotating speed increases, and it becomes 1 sec at rotating speed of 1,000 rpm. Complete mixing times evaluated from tracer tests showed higher than those calculated by power number at higher rotating speed. Complete mixing times, however, calculated by CFD showed similar to those of experimentally evaluated ones.

• 천문학회지
• /
• 제48권6호
• /
• pp.343-355
• /
• 2015

There is much observational evidence that active star formation is taking place in the Hii regions Sh 2-255 – 257. We present a photometric study of this star forming region (SFR) using imaging data obtained in passbands from the optical to the mid-infrared, in order to study the star formation process. A total of 218 members were identified using various selection criteria based on their observational properties. The SFR is reddened by at least E(B −V ) = 0.8 mag, and the reddening law toward the region is normal (R_V = 3.1). From the zero-age main sequence fitting method it is confirmed that the SFR is 2.1 ± 0.3 kpc from the Sun. The median age of the identified members is estimated to be about 1.3 Myr from a comparison of the Hertzsprung-Russell diagram (HRD) with stellar evolutionary models. The initial mass function (IMF) is derived from the HRD and the near-infrared (J, J −H) color-magnitude diagram. The slope of the IMF is about Γ = −1.6 ± 0.1, which is slightly steeper than that of the Salpeter/Kroupa IMF. It implies that low-mass star formation is dominant in the SFR. The sum of the masses of all the identified members provides the lower limit of the cluster mass (169M_⊙). We also analyzed the spectral energy distribution (SED) of pre-main sequence stars using the SED fitting tool of Robitaille et al., and confirm that there is a significant discrepancy between stellar mass and age obtained from two different methods based on the SED fitting tool and the HRD.

• Parasites, Hosts and Diseases
• /
• 제61권2호
• /
• pp.103-126
• /
• 2023

In the l950s, under the legacy of traditional agriculture, Ascaris lumbricoides, spread epidemically in the war-bitten society of Korea. Consensus on the parasite control was drafted in the Parasite Disease Prevention Act, which passed a parliamentary agreement in 1966, and established safe disposal of feces and mass chemotherapy as control strategies. Biannual stool examinations and treating infected schoolchildren were basic scheme of the control activity through which revenue could be secured for organized business. In the 27 years following 1969, a maximum of 16 million stool examinations had been done every year. Cellophane thick smear enabled the task. The infection declined remarkably in the 1970s when industrialization and green revolution proceeded. A population study of A. lumbricoides in the late 1970s helped us better understand its epidemiology. The data also settled down the understandable protest of teachers against the repeated stool examinations. In the 9 years following 1987, the target population was gradually reduced when the egg positive rate was below 0.1%. An article in the Korean Law, stipulating obligatory stool examinations, was made optional. Although the long-term Korean effort of Ascaris control was a success, the effect of mass chemotherapy was not as succinct in terms of lowering reinfection. In the period of control, Korean agricultural technology changed, and the economy grew and supplied sanitary facilities by which the vicious cycle was disconnected. Reduction of morbidity was a benefit of mass chemotherapy, which is the only control method feasible in economically difficult countries. The most important hurdle of parasite control in the 1960s was poverty of general population and limited financial resources in Korea but the society formed a consensus on the priority of intestinal helminthiasis control during the ordeal period. The national consensus in the 1960s was the critical milestone for Ascaris control in Korea. Under the social agreement, application of timely technical and research advancements in parasitology achieved the success of ascariasis elimination. The successful experience of ascariasis elimination in Korea can be a benchmark for countries where neglected tropical diseases are endemically recycled.

• 과학기술학연구
• /
• 제15권2호
• /
• pp.229-262
• /
• 2015

20세기 중반 이후, 거대과학기술 시스템과 대량생산 체제의 발달에 수반되어 방사능, 공해, 새로운 합성물질 및 제조물 등 후기 근대적 위험(late modern risk)에 노출된 다수의 피해자들이 나타났다. 이들이 제기한 환경 공해소송 및 제조물 책임 소송에서 과학적 인과관계 규명과 법적 책임 판단은 과학기술과 법 영역에서 가장 첨예한 논쟁의 대상으로 부상했다. 이 글은 한국 담배소송에서 후기 근대적 위험에 대응하고자 나타났던 여러 과학기술적, 법적 도구들이 어떻게 적극적으로 사용되며 흡연과 폐암의 인과관계에 대한 새로운 법적 판단을 이끌어 내었는지 분석했다. 한국 법정에서 역학과 위험사회 질병의 정의를 둘러싼 첨예한 논쟁이 벌어졌으며, 인과관계 논쟁의 '해결' 과정에서 법적 규범, 책임 및 과학적 증거에 대한 후기 근대적 재해석의 틀이 마련되었던 것이다. 결론으로 위험사회에서의 피해와 법적 정의 구현에 대한 새로운 합의 도출 과정에서 과학기술과 법의 상호작용과 그 변화에 대한 이해가 핵심적이었으며, 이러한 이해가 후기 근대적 환경 공해소송과 제조물 소송에 대한 과학기술학적 분석에 유용할 것이라 제안한다.

• 한국소음진동공학회논문집
• /
• 제21권9호
• /
• pp.858-867
• /
• 2011

As applying an active control technique to a pneumatic vibration isolation system, the settling time for the payload excitation could be remarkably reduced as well as the improvement of isolation performance for the ground vibration. Some previous researches were dealt with the settling time through the simulation or experiment but, the discussion on the simulation or experimental results including moving parts, such as a XY-stage, on the isolation table rarely exists. As considering the moving part, the dynamic model could be time varying system and in such a case the force imposed on pneumatic vibration isolation table could be described by inertial forces of moving parts according to Newton's 3rd law, the action and reaction law. In this paper, the simulation procedure of the 3-DOF active pneumatic vibration isolation system including moving parts by TDC(time delay control) technique is proposed and the effectiveness through simulation results are also shown.

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2611-2616
• /
• 2011

We studied the physical properties of the mercaptopyruvic-acid layer formed on gold surfaces, which has the interactions with the titanium dioxide surface for design of gold- titanium dioxide distribution. Surface force measurements were performed, using the atomic force microscope (AFM), between the surfaces as a function of the salt concentration and pH value. The forces were analyzed with the DLVO (Derjaguin-Landau-Verwey-Overbeek) theory, to evaluate the potential and charge density of the surfaces quantitatively for each salt concentration and each pH value. The difference in the properties reflected the effect of the isoelectric point on the surface forces. The forces were interpreted for the evaluation with the law of mass action and the ionizable groups on the surface. The salt concentration dependence of the surface properties, found from the measurement at pH 8.0, was consistent with the prediction from the law. It was found that the mercaptopyruvic-acid layer had higher values for the surface charge densities and potentials than the titanium dioxide surfaces at pH 8, which may be attributed to the ionized-functional-groups of the mercaptopyruvic-acid layer.

• 한국수소및신에너지학회논문집
• /
• 제23권1호
• /
• pp.65-72
• /
• 2012

Rankine cycle using ammonia-water mixture as a working fluid has attracted much attention, since it may be a very useful device to extract power from low-temperature heat source. In this work, the thermodynamic performance of regenerative ammonia-water Rankine cycle is thoroughly investigated based on the second law of thermodynamics and exergy analysis, when the energy source is low-temperature heat source in the form of sensible energy. In analyzing the power cycle, several key system parameters such as ammonia mass concentration in the mixture and turbine inlet pressure are studied to examine their effects on the system performance including exergy destructions or anergies of system components, efficiencies based on the first and second laws of thermodynamics. The results show that as the ammonia concentration increases, exergy exhaust increases but exergy destruction at the heat exchanger increases. The second-law efficiency has an optimum value with respect to the ammonia concentration.

• Geomechanics and Engineering
• /
• 제15권4호
• /
• pp.973-986
• /
• 2018

The objective of this paper is to present abacuses obtained from a parametric study of deep-lined tunnels using a numerical finite element model. This numerical model was implemented in software GEOMEC91, which is a two-dimensional axisymmetric model that considers the progress of excavation and the placing of the lining through the activation and deactivation of elements. It is adopted a step of excavation constant (1/3 of radius), constant velocity and circular cross section along the tunnel axis. It is used for rock mass a viscoplastic constitutive law with von-Mises criterion of viscoplasticity without hardening whose deformation rate over time is given by the Bingham model. The lining uses a linear elastic constitutive law. In total are 1716 analysis presented in 60 abacuses that show the value of ultimate convergence ($U_{eq}$) due to tunneling speed. In addition, it is shown an example of the use of the abacuses to determine the ultimate convergence ($U_{eq}$) of the tunnel and pressure ($P_{eq}$) on the lining.

• Current Optics and Photonics
• /
• 제1권2호
• /
• pp.118-124
• /
• 2017

Color rendering index (CRI) and luminous efficacy (LE) are two key performance factors of white LEDs (WLED). While most recent works in optics focus on methodology to improve these factors, little attention has been dedicated to chemical composition of materials. This paper studies the effect of $Sr_{2.4}1F_{2.59}B_{20.03}O_{74.8}:Eu_{0.12},Sm_{0.048}$ phosphor (SrSm), in terms of concentration and particle size on CRI and LE of 8500 K - WLEDs. Importantly, the molar mass of the componential ions in SrSm are calculated to shed light on the connection between the chemical composition of the material of interest and the performance of WLEDs. Results show that CRI can be improved to a value of around 86 by boosting red-light components in WLEDs, for all 3 major configurations: conformal, in-cup, and remote phosphor. CRI value tends to decrease with larger size of particles, while LE value goes in the reverse direction. On the other hand, both CRI and LE appear to be reduced at higher concentration of SrSm. This light attenuation is analyzed by using the Lambert-Beer law and Mie-scattering theory.