• Bulletin of the Korean Chemical Society
• /
• 제28권8호
• /
• pp.1383-1388
• /
• 2007

Recently, the semiconductor and display industries have tried to reduce the emissions of perfluorocompounds (PFCs) from the globally environmental regulation. Total amount of PFC emission can be calculated from the flow rate and the partial pressures of PFCs. For the precise measurement of PFC emission amount, the mass flow controlled helium gas was continuously injected into the equipment of which scrubber efficiency is being measured. The partial pressures of PFCs and helium were accurately measured using a mass spectrometer in each sample extracted from inlet and outlet of the scrubber system. The flow rates are calculated from the partial pressures of helium and also, PFC destruction and removal efficiency (DRE) of the scrubber is calculated from the partial pressure of PFC and the flow rate. Under this method, the relative expanded uncertainties of the flow rate and the partial pressures of PFCs are ± 2% (k = 2) in case the concentrations of NF3 and SF6 are as low as 100 μmol/mol.

• 대한영양사협회학술지
• /
• 제17권2호
• /
• pp.99-117
• /
• 2011

The purpose of this study was to investigate weight gain during pregnancy based on pre-pregnant Body Mass Index, to compare eating habits based on the recommended standards for weight gain presented by the Institute of Medicine, and to identify factors affecting the weight gain of pregnant women. The subjects were grouped into three categories according to the recommended weight gain standards presented by the Institute of Medicine: the inadequate group, the adequate group and the excessive group. The excessive group had a significantly higher pre-pregnant Body Mass Index than that of the two other groups. Based on a comparison of the eating habits and nutrient intake of the women to the recommended standards for weight gain, the excessive gain group had large meals and ate more frequently outside of the home when compared to the pre-pregnancy period. Based on an analysis of correlations between weight gain during pregnancy and diet factors, the adequate gain group had positive correlation between weight gain and a "balanced meal" and had negative correlation with "convenience meals". The excessive gain group had a positive correlation with "convenience meals" and had a negative correlation with "meal skipping." All the pregnant women were more frequent in the "overeating categories" and all ate more "fruit," as their weight gain was higher. In particular, the excessive gain group was frequently evaluated as "overeating". These results indicate that the factors affecting weight gain during pregnancy were the Body Mass Index before pregnancy, eating types, and eating habits. As the Body Mass Index before pregnancy was higher, the ingestion of a 'balanced meal' was less, and overeating and gluttony were more frequent. Therefore weight gain was enhanced.

• 복식
• /
• 제65권2호
• /
• pp.125-143
• /
• 2015

This study is to propose an 'education-training-certificate of qualification' design of fashion accessories production, which can be applied to education in universities and individuals. It is based on the National Competency Standards (NCS), which was developed through the '2013 National Competency Standards Development Project' for the fashion accessories production. FGI (Focus Group Interviews), which is a research methodology, is carried out on target groups of educational experts and specialists in the field of fashion accessories production. Through this, five courses were suggested; first, 'fashion accessories design' course was proposed for the education and training of 'design development' and 'development of raw materials'. Secondly, 'fashion product production' course was proposed for the education and training of 'production of samples'. Thirdly, 'fashion product manufacture and planning' course was proposed for the competency element units: 'calculation of cost', 'determination of mass production model and price', 'planning of the main manufacturing process' and 'ordering of raw materials'. Lastly, 'mass production of fashion products' course and the 'field practice of fashion product manufacture' course were proposed for the competency element units: 'planning for mass production', 'preparation for mass production', 'mass production' and 'inspection of completed products'. In addition, a new certificate of 'technician of fashion accessory production' was proposed in order to test qualified skills for the fashion accessories production. The test is composed of a written examination of short-answer questions, technical drawing and production.

• Mass Spectrometry Letters
• /
• 제5권2호
• /
• pp.42-48
• /
• 2014

A specific and sensitive liquid chromatography-electrospray ionization tandem mass spectrometry method (LC-ESI-MS/MS) was developed and validated for the simultaneous quantification of porphyrins (coproporphyrin, pentacarboxylporphyrin, hexacarboxylporphyrin, heptacarboxylporphyrin, and uroporphyrin) in human plasma and urine. Acidified plasma samples and urine samples were prepared by using liquid-liquid extraction using ethyl acetate and protein precipitation with acetonitrile, respectively. The separation was achieved onto a Synergi Fusion RP column ($150mm{\times}2.0mm$, $4{\mu}m$) with a gradient elution of mobile phase A (0.1% formic acid in 2 mmol/L ammonium acetate, v/v) and mobile phase B (20% methanol in acetonitrile, v/v) at a flow rate of $450{\mu}L$/min. Porphyrins and the internal standard (IS), coproporphyrin I-$^{15}N_4$, were detected by a tandem mass spectrometer equipped with an electrospray ion source operating in positive ion mode. Multiple reaction monitoring (MRM) transitions of the protonated precursor ions and the related product ions were optimized to increase selectivity and sensitivity. The proposed method was validated by assessing selectivity, linearity, limit of quantification (LOQ), precision, accuracy, recovery, and stability. The calibration curves were obtained in the range of 0.1-100 nmol/L and the LOQs were estimated as 0.1 nmol/L for all porphyrins. Results obtained from the validation study of porphyrins showed good accuracy, precision, recovery, and stability. Finally, the proposed method was successfully applied to clinical studies on the autism spectrum disorder (ASD) diagnosis of 203 Korean children.

• Mass Spectrometry Letters
• /
• 제5권2호
• /
• pp.52-56
• /
• 2014

Glycated hemoglobin (HbA1c) is used as an index of mean glycemia over prolonged periods. This study describes an optimization of enzyme digestion conditions for quantification of non-glycated hemoglobin (HbA0) and HbA1c as diagnostic markers of diabetes mellitus. Both HbA0 and HbA1c were quantitatively determined followed by enzyme digestion using isotope dilution liquid chromatography-tandem mass spectrometry (ID-LC-MS/MS) with synthesized N-terminal hexapeptides as standards and synthesized isotope labeled hexapeptides as internal standards. Prior to quantification, each peptide was additionally quantified by amino acid composition analysis using ID-LC-MS/MS via acid hydrolysis. Each parameter was considered strictly as a means to improve digestion efficiency and repeatability. Digestion of hemoglobin was optimized when using 100 mM ammonium acetate (pH 4.2) and a Glu-C-to-HbA1c ratio of 1:50 at $37^{\circ}C$ for 20 h. Quantification was satisfactorily reproducible with a 2.6% relative standard deviation. These conditions were recommended for a primary reference method of HbA1c quantification and for the certification of HbA1c reference material.

• Mass Spectrometry Letters
• /
• 제8권3호
• /
• pp.53-58
• /
• 2017

Glycated hemoglobin ($HbA_{1c}$) has been commonly used to screen and diagnose for patients with diabetes mellitus. Here the accelerated procedure of microwave-assisted sample treatment from acid hydrolysis to enzyme digestion followed by isotope dilution liquid chromatography-tandem mass spectrometry (ID-LC-MS/MS) was optimized and applied to measure $HbA_{1c}$ in an effort to speed up analysis time. First, two signature peptides of $HbA_{1c}$ and hemoglobin $A_0$ were certified with amino acid analysis by setting optimized acid hydrolysis conditions to $150^{\circ}C$, 1.5 h and $10{\mu}M$ sample concentration in 8 M hydrochloric acid. Consequently, the accurate certified peptides above were used as calibration standards to implement the proteolytic procedure with endoproteinase Glu-C at $37^{\circ}C$, 700 W for 6 h. Compared to the traditional method, the microwave heating not only shortened dramatically sample preparation time, but also afforded comparable recovery yields. The optimized protocol and analytical conditions in this study are suitable for a primary reference method of $HbA_{1c}$ quantification with full SI-traceability and other similar proteins in complex biological samples.

• Mass Spectrometry Letters
• /
• 제8권3호
• /
• pp.65-68
• /
• 2017

Thiamethoxam is one of the main suspect in honeybee colony collapse disorder (CCD). Due to this reason, thiamethoxam including imidacloprid and clothianidin has been banned for two years in some Europe countries. The CCD phenomenon has also been reported in Korea. Regarding this issue and needs, a new project has started to develop the method for the quatitation of thiamethoxam using isotope dilution mass spectrometry (IDMS). In the process of optimization for the IDMS method with thiamethoxam and $thiamethoxam-d_3$, we observed that the fragment peaks did not correspond to the fragmentation pathway as published elsewhere. Here, we proposed a candidate fragmentation pathway. To validate the proposed fragmentation pathway, another isotope analogue, $thiamethoxam-d_4$, was introduced and the MS/MS spectra of both isotope analogues were compared. In addition, the MS/MS/MS spectra of thiamethoxam were inspected for more evidence of the candidate pathway. Those spectra indicated that the proposed fragmentation pathway could be used to assign the fragment peaks of thiamethoxam.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3228-3232
• /
• 2010

Malachite green (MG) has been used world-widely in aquaculture as a parasiticide or fungicide. Although MG performed successfully, it has not been permitted for use in aquaculture from European Union, USA, and Canada because of its carcinogenicity and mutagenicity. We developed a sensitive and specific method to determine MG and its principal metabolite, leucomalachite green (LMG), respectively by isotope dilution liquid chromatography mass spectrometry (ID-LC/MS). To enhance the extraction recovery of MG and LMG from fish tissue, an additional step, saponification, was introduced in sample preparation process to remove fat in sample extract, which hampered the performance of SPE columns. The residue of MG and LMG in fish was analyzed using liquid chromatography mass spectrometry in the selected ion monitoring (SIM) mode by monitoring at m/z 329 and 334 for MG and $d_5$-MG and at m/z 331 and 337 for LMG and $^{13}C_6$-LMG, respectively. This method was validated by comparing with the value of the reference material provided by Laboratory Government Chemistry (LGC). The results agreed within the measurement uncertainty and the accuracy was much improved than the provided reference value by LGC.

• Applied Science and Convergence Technology
• /
• 제25권2호
• /
• pp.25-27
• /
• 2016

The surface flatness of metal meshes in a deflector of particle beam mass spectrometer (PBMS) required ideally flat, and this can specify the particle trajectories which goes through the detector. In this research, charged particle current was measured using the different surface roughness deflectors. NaCl particles were generated monodispersed in its size by using differential mobility analyzer and the whole processes were followed the way calibrating PBMS. The results indicate that the mesh surface morphology in the deflector can affect to the particle size and the concentration errors, and sensitivity of PBMS.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.531-538
• /
• 2013

A mass balance method established in this laboratory was applied to determine the purity of an endosulfan-II pure substance. Gas chromatography-flame ionization detector (GC-FID) was used to measure organic impurities. Total of 10 structurally related organic impurities were detected by GC-FID in the material. Water content was determined to be 0.187% by Karl-Fischer (K-F) coulometry with an oven-drying method. Non-volatile residual impurities was not detected by Thermal gravimetric analysis (TGA) within the detection limit of 0.04% (0.7 ${\mu}g$ in absolute amount). Residual solvents within the substance were determined to be 0.007% in the Endosulfan-II pure substance by running GC-FID after dissolving it with two solvents. The purity of the endosulfan-II was finally assigned to be ($99.17{\pm}0.14$)%. Details of the mass balance method including interpretation and evaluating uncertainties of results from each individual methods and the finally assayed purity were also described.