• 공업화학
• /
• 제27권3호
• /
• pp.335-341
• /
• 2016

본 연구에서는 지상 및 미소중력환경하에서 물리적 승화법 공정에서의 확산-대류유동에 미치는 불순물의 영향을 이론적으로 $Hg_2Cl_2-I_2$ 시스템에 적용하여 규명하는 것이다. 이론적 해석은 증기상에서 확산-대류 흐름, 열 및 물질전달을 속도 벡터 흐름, 유선, 온도, 농도 분포를 통하여 제시된다. 결정 영역에서의 전체 몰플럭스는 중력가속도와 성분 $I_2$, 불순물에 상당히 민감하게 반응한다. 성분 $I_2$을 증가시켰을 때, 농도 대류효과는 확산-대류 유동흐름을 안정화시키는 경향이 있다. 지상중력가속도의 0.001환경에서는 유동흐름은 1차원포물선의 흐름 구조를 나타내며, 확산지배형태를 보여주고 있다. $10^{-3}$지상중력가속도 이하에서는 대류 영향은 무시할 수 있다.

• 한국인터넷방송통신학회논문지
• /
• 제12권6호
• /
• pp.135-139
• /
• 2012

인터넷의 확산과 정보 교환, 배포와 수집 기술에 대한 의존도의 증대로 과거와는 비교할 수 없는 대용량의 데이터가 생성되었다. 대용량 데이터를 식별하고 가려내는 작업은 가까운 미래에 오늘날의 컴퓨터 과학의 상당 부분을 새롭게 정의할 것으로 예상된다. 여러 관련 분야에서 반복되는 중요한 과제는 재식별의 문제이다. 광범위한 정의에서, 재식별 문제는 과거에 인식된 객체를 다시 식별하는 문제이다. 예를 들면, 여러 장소에 설치된 감시 카메라에 포착된 어떤 사람을 추적하는 문제가 이에 해당한다. 본 논문에서는 서로 다른 분야에서 이 과제를 어떻게 정의하고, 이 과제를 어떻게 해결하는가에 대해 비교 분석한다. 비디오 감시에서 사람 재식별, 텍스트 샘플에서 저자 식별, 사진 선호도에 따른 사용자 식별 등이 이에 포함된다. 본 논문은 또한 학제간 해결 방안이 장점을 지니는 상황에 대한 비전을 제시한다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.645-649
• /
• 2009

Liquid desiccant cooling technology can supply cooling by using waste heat and solar heat which are hard to use effectively. For compact and efficient design of a dehumidifier, it is important to sustain sufficient heat and mass transfer surface area for water vapor diffusion from air to liquid desiccant on heat exchanger. In this study, the plate type heat exchanger is adopted which has extended surface, and hydrophilic coating and porous layer coating are adopted to enhance surface wettedness. PP(polypropylene) plate is coated by porous layer and PET(polyethylene terephthalate) non-woven fabric is coated by hydrophilic polymer. These coated surfaces have porous structure, so that falling liquid film spreads widely on the coated surface foaming thin liquid film by capillary force. The temperature of liquid desiccant increases during dehumidification process by latent heat absorption, which leads to loss of dehumidification capacity. Liquid desiccant is cooled by cooling water flowing in plate heat exchanger. On the plate side, the liquid desiccant can be cooled by internal cooling. However the liquid desiccant on extended surface should be moved and cooled at heat exchanger surface. Optimal mixing and distribution of liquid desiccant between extended surface and plate heat exchanger surface is essential design parameter. The experiment has been conducted to verify effective surface treatment and distribution characteristics by measuring wall side flow rate and visualization test. It is observed that hydrophilic and porous layer coating have excellent wettedness, and the distribution can be regulated by adopting holes on extended surface.

• 대한기계학회논문집A
• /
• 제37권6호
• /
• pp.739-745
• /
• 2013

본 연구에서는 급수 순환 시스템 중 동작 유체의 이송을 위해 사용하는 배관을 대상으로 관로 크기 및 고온 급수 환경에 따른 침식-부식 거동과 그 영향을 규명하고자 하였다. 이를 위해 일반적인 관로 소재인 철과 핵심 부식 인자인 산소의 화학반응식을 기반으로 Hayduk 과 Minhas 가 제안한 모델을 이용하여 침식-부식 해석을 실시하였다. 상용 유한요소해석 프로그램인 ABAQUS 를 사용하여 해석을 수행하였으며 배관의 직경 및 급수 온도를 변화시킴에 따른 침식-부식률을 평가할 수 있었다. 결과를 통해 급수 온도가 침식-부식률에 가장 큰 영향을 미치는 요인이 됨을 알 수 있었으며, 특히 $290^{\circ}C$ 급수에 노출된 스테인리스 316 강은 연간 $2.59{\mu}m$의 두께 손실이 발생할 것으로 예상되었다.

• Journal of Korean Neurosurgical Society
• /
• 제53권5호
• /
• pp.312-315
• /
• 2013

Aspergillosis in the central nervous system (CNS) is a very rare disease in immune-competent patients. There was a case of a healthy man without a history of immune-compromised disease who had invasive aspergillosis with unusual radiologic findings. A 48-year-old healthy man with diabetes mellitus, presented with complaints of blurred vision that persisted for one month. Brain magnetic resonance imaging (MRI) showed multiple nodular enhancing lesions on the right cerebral hemisphere. The diffusion image appeared in a high-signal intensity in these areas. Cerebrospinal fluid examination did not show any infection signs. An open biopsy was done and intraoperative findings showed grayish inflammatory and necrotic tissue without a definitive mass lesion. The pathologic result was a brain abscess caused by fungal infection, morphologically aspergillus. Antifungal agents (Amphotericin B, Ambisome and Voriconazole) were used for treatment for 3 months. The visual symptoms improved. There was no recurrence or abscess pocket, but the remaining focal enhanced lesions were visible in the right temporal and occipital area at a one year follow-up MRI. This immune-competent patient showed multiple enhancing CNS aspergillosis in the cerebral hemisphere, which had a good outcome with antifungal agents.

• 대한기계학회논문집B
• /
• 제28권12호
• /
• pp.1557-1566
• /
• 2004

A flame extinction phenomenon is a typical unsteady process in combustion. Flame extinction is characterized by various physical phenomena, such as convection, diffusion, and the production of heat and mass. Flame extinction can be achieved by either increasing the strain rate or curvature, by diluting an inert gas or inhibitor, or by increasing the thermal or radiant energy loss. Though the extinction is an inherently transient process, steady and quasi-steady approaches have been used as useful tools for understanding the flame extinction phenomenon. Recently, unsteady characteristics of flames have been studied by many researchers, and various attempts have been made to understand unsteady flame behavior, by using various extinction processes. Representative parameters for describing flame, such as flame temperature, important species related to reactions, and chemi-luminescence of the flame have been used as criterions of flame extinction. In these works, verification of each parameter and establishing the proper criterions of the extinction has been very important. In this study, a time-dependent flame temperature and an OH radical concentration were measured using optical methods, and the instantaneous change of the flame luminosity was also measured using a high-speed ICCD (HICCD) camera. We compare the unsteady extinction points obtained by three different methods, and we discuss transient characteristics of maximum flame temperature and OH radical distribution near the extinction limit.

• Korean Chemical Engineering Research
• /
• 제54권4호
• /
• pp.487-493
• /
• 2016

양이온교환 고성능액체크로마토그래피에서 라이소자임을 분석하고, 실험결과인 크로마토그램을 통해 모멘트 분석을 수행하였다. 용리 인산완충용액은 1.0, 0.75, 0.5 M의 소금을 포함하였다. 실험변수는 유량, 용리 완충용액중 소금 농도, 시료의 농도로 하였다. General rate (GR) model을 도입하여 1차와 2차 모멘트를 해석하였다. 1차 모멘트 해석에서 평형상수 K를 구할 수 있으며, 이는 $L/u_0$ vs. $({\mu}_1-t_0)/(1-{\varepsilon}_e)(1-{\varepsilon}_i)$]를 도식화했을 때의 기울기이다. 2차 모멘트 해석에서 입자내 확산계수는 이론단수 실험자료에서 계산하였다. 모멘트 분석결과를 통해 여러 물질전달 현상이 이론단 상당높이(HETP)에 주는 영향을 알아보기 위해 van Deemter plot을 작성하고, 총괄 이론단 상당높이($H_{total}$)에 기여하는 $H_{ax}$, $H_f$, 그리고 $H_d$를 조사하였다. 그 중 입자내 확산계수를 나타내는 $H_d$가 가장 지배적이었고, 외부 물질전달 계수를 나타내는 $H_f$의 영향이 가장 미미했다.

• Journal of Microbiology and Biotechnology
• /
• 제18권1호
• /
• pp.43-47
• /
• 2008

The nickel and cobalt resistance of Cupriavidus metallidurans CH34 is mediated by the CnrCBA efflux pump encoded by the cnrYHXCBAT metal resistance determinant. The products of the three genes cnrYXH transcriptionally regulate expression of cnr. CnrY and CnrX are membrane-bound proteins, probably functioning as anti-sigma factors, whereas CnrH is a cnr-specific extracytoplasmic functions (ECF) sigma factor. The periplasmic domain of CnrX (residues 29-148) was cloned as a N-terminal His-tagged protein, expressed in Escherichia coli, and purified using affinity chromatography and gel filtration. The molecular mass was estimated to be about 13.6kDa by size exclusion chromatography, corresponding to a monomer. The tetragonal bipyramid crystals were obtained by mixing an equal volume of protein in 50mM Tris-HCl, pH 7.5, 1% glycerol, 100mM NaCl, 1mM DTT, and the reservoir solution of 15% w/v PEG 2000, 100mM lithium chloride at 277K in 2-4 days using hanging drop vapor diffusion. The protein concentration was 24mg/ml. The crystal that diffracted to $2.42{\AA}$ resolution belongs to space group $P4_1\;or\;P4_3$ with unit cell parameters of $a=b=32.14{\AA},\;c=195.31{\AA},\;{\alpha}={\beta}={\gamma}=90^{\circ}$, with one molecule of CnrX in the asymmetric unit.

• 에너지공학
• /
• 제16권3호
• /
• pp.120-127
• /
• 2007

본 연구의 목적은 디젤연소장의 분위기조건에 따라 다성분 혼합연료의 질량분률이 분무착화 및 연소특성에 미치는 영향을 실험적으로 고찰하는데 있다. 착화 및 연소특성은 화학발광계측법 및 직접촬영법을 이용하여 분석되었다. 실험은 광계측기를 사용하여 RCEM에서 이루어졌으며, 이소옥탄, 노말 도데칸, 노말 헥사데칸으로 혼합한 다성분연료는 커먼레일 인젝터의 전자제어에 의해 RCEM의 연소실 내로 분사된다. 실험조건은 분사압력 42, 72, 112 MPa과 분위기온도 700, 800, 900 K로 하였다. 그 결과로서 착화지연은 고세탄가성분에 의존하고, 분위기온도가 낮을 경우 저비점성분 혼합비율의 증가에 따라 휘도영역이 현저하게 낮아지며, 열발생률이 증가하면서 확산연소기간을 단축시킨다.

• 기술혁신연구
• /
• 제8권2호
• /
• pp.19-65
• /
• 2000

This study analyzes the development of technological infrastructure(TI) and technological infrastructure policy(TIP) to enhance the technological capabilities of small and mid-sized manufacturing enterprises(SMEs) in the U.S. and Korea in terms of the technological system(TS) concept, which is composed of technological infrastructure, industrial organization, and institutional infrastructure. In order to analyze the internal dynamics of the system, such as incentive mechanisms, the interaction among economic actors, and the policy implementation process, we compare the MEP(Manufacturing Extension Partnership) system of the U.S. and the Joong-Jin-Gong system of Korea. Among many similarities, contrasts, and insights from each country's effort to construct TI and TS, the main findings are as follows. (1) Both the MEP system and the Joong-Jin-Cong system are TI-led or government-led type TS. However, the nation-wide picture is different: in the U.S., most TSs including the MEP system., are classified as TI-led type; in Korea, many TI-assisted or private sector-led TSs have been developed since the early 1960s. (2) the MEP system, as a representative case of the U.S., is less stable than the Joong-Jin-Gong system of Korea in terms of financing and political cycle. (3) The MEP system is a more complex and cooperative network than the Joong-Jin-Gong system. NIST, as a critical mass, generates the system, bridges various institutions, and influences the development of the system by providing funding. (4) Regarding TI components, TSs in both countries focus on utilizing off-the-shelf technologies rather than advanced technologies. However, the direction of movement is different: in the U.S., TSs have come to emphasize existing technologies to counterbalance an innovation system that has been highly focused toward new technologies; in Korea, TSs have been moving from focusing on a higher diffusion rate of imported process technologies to stressing new technology development. (5) Personnel and staffing, embodying technological capability, is an important concern in both countries. But the human capital infrastructure of the U.S. system is more efficient and industry-oriented than that of the Korean system due to a more flexible labor market. (6) While the U.S. has a strong tradition of state and local autonomy in constructing TI and TS to fit SMEs's specific need, Korea has a centralized and bureaucratically-led policy implementation process.