• Microbiology and Biotechnology Letters
• /
• v.45 no.3
• /
• pp.185-199
• /
• 2017

Methane, which is emitted from natural and anthropogenic sources, is a representative greenhouse gas for global warming. Methanotrophs are widespread in the environment and play an important role in the biological oxidation of methane via methane monooxygenases (MMOs), key enzymes for methane oxidation with broad substrate specificity. Methanotrophs have attracted attention as multifunctional bacteria with promising applications in biological methane mitigation technology and environmental bioremediation. In this review, we have summarized current knowledge regarding the biodiversity of methanotrophs, catalytic properties of MMOs, and high-cell density cultivation technology. In addition, we have reviewed the recent advances in biological methane mitigation technologies using methanotrophs in field-scale systems as well as in lab-scale bioreactors. We have also surveyed information on the dynamics of the methanotrophic community in biological systems and discussed the various challenges pertaining to methanotroph-related biotechnological innovation, such as identification of suitable methanotrophic strains with better and/or novel metabolic activity, development of high-cell density mass cultivation technology, and the microbial consortium (methanotrophs and non-methanotrophs consortium) design and control technology.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.9
• /
• pp.597-603
• /
• 2014

The aim of the present study is to compare sound performance depending on thickness, materials, and structure of polymer soundproof panels consisting of PC, PMMA, HDPE, and PP, respectively. As a result of comparing sound transmission loss (STL) of single layer panel made of four types of polymer, the better sound transmission loss was obtained in order of PC, PMMA, HDPE, and PP, which was obviously followed mass law. 8 mm of single panel showed 5~6 dB(A) greater STL than that of 4 mm panels and lower frequency for coincidence effect so that STL of 8 mm panels decreased around 4,000~5,000 Hz, indicating less STL of 4 mm panels than those of 8 mm. When it comes to structure, 4 mm panels with air layer appeared similar value of STL with 8 mm single panels under 300 Hz. In range of high frequency above 2,000 Hz, 4 mm panels with air layer performed better than 8 mm of single layer panel while resonance effects were observed at 500~630 Hz. It was found that these results could be practically utilized as fundamental data for noise barriers design considering the change to each condition.

• The Journal of the Korea Contents Association
• /
• v.18 no.10
• /
• pp.631-643
• /
• 2018

This study is the first ever attempted series paper of one particular TV drama writer, Su-Hyeon Kim, with diversified and systematic scale. Along with the just before study, proving Su-Hyeon Kim's line's conceptual properties as the Bahktin's dialogism, its core of polyphony, this study is to analyze the concrete method of creation through Bahktin's Canivalistic creation component of 'Grotesque Realism' and 'Unofficial Square Language'. With her work of (SBS, 1992), this study verifies its characteristic creation of lines to be the 'Grotesque Realism' components of overturn, destruction, and creation along with 'Unofficial Square Language' components of the masses, material, physical language, and discourse of self-liberation. In this way, this study is on one hand, to overcome the application problem of Bahktin's theory as a separated one, but also to enhance the quality of the study of the writer and the lines. As a result, she has acquired her own distinction of ambivalence by the way of demotion, overturn with masses' material, physical, unofficial square language along with a stronger execution of acquiring self denial, positivity. liberation, and life. Therefore the writer is highly rated for her fierce cognition of language and her artistic spirit. Also, this paper proposes the following study to appraise the impact of the writer's differentiation and artistic spirit on the creation of Korean TV drama, contents industry, and mass media.

• Tunnel and Underground Space
• /
• v.16 no.6 s.65
• /
• pp.506-525
• /
• 2006

For the design of large scale rock slope which has complex formations and geological structures, generally, insufficiency of geotechnical investigations and laboratory tests are the main factors of slope failures doling construction. In such case, remedial measures to stabilize slope should be selected and applied through reliable investigations and analysis considering the geotechnical characteristics. The rock slope of this study, one of the largest cut slopes in Korea with a length of 520.0 m and maximum height of 122.0 m consists of metasedimentary rocks. And a case study on the causes of large-scale rock slope failure was carried out by analysis of landslides history and site investigations during construction. When the slope with the original design slope of 0.7: 1.0 (H:V) was partially constructed, the slope failure was occurred due to the factors such as poor conditions of rocks (weathered zone, coaly shale and fault shear zone), various discontinuities (joints, foliations and faults), severe rain storm and so on. The types of failures were rockfall, circular failure, wedge failure and the combination of these types. So, the design of slope was changed three times to ensure long-term slope stability. This paper is intended to be a useful reference for analyzing and estimating the stability of rock slopes whose site conditions are similar to those of this study site such as geological structures and geotechnical properties.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.185-195
• /
• 2011

Aircraft-related accidents cause mass casualties and major material damages. At present, runway-related accidents in our country account for 28% of all air accidents. Furthermore, internationally 33% of all air accidents is connected with runway. To prevent these accidents, FAA mandates the installation of aircraft rapid arresting system(ARAS) at the runway end safety areas which do not meet the FAA requirements. Even if the areas satisfy the conditions, FAA recommends the installation of ARAS to ensure the safety. In accordance of the international affairs, the domestic studies for ARAS are in progress and the legal formalities for domestic adoption of ARAS is under way. In this study, we analyzed the stopping distance, drag force, vertical force and tire penetration of runway overrun to assess the performance of ARAS reasonably by using two different kinds of analysis programs. The first is ARRESTOR program adopted by FAA, and the second is LS-DYNA which is available for 3-dimensional nonlineal dynamic analysis. As a result, analytically the stopping distances between two programs are similar. The drag force is rather different, but the tendencies are similar. Later on, the 3-dimensional simulation analysis considering various air-craft condition and properties of packaging materials is necessary. In addition, ongoing development of simulation analysis program is required for more accurate analistic results.

• Journal of Sericultural and Entomological Science
• /
• v.51 no.2
• /
• pp.207-210
• /
• 2013

In this study, matured silkworm hemolymph was studied for inhibitory effect on melanin formation, tyrosinase activities. A matured silkworm hemolymph mass purification method was developed and some of suppressing melanin formation effects were investigated, too. As a result, the advanced purification method was higher in yield rate than existing one by 53%. A free radical scavenging activity of hemolymph was higher than sericin on the market($IC_{50}$, $202.9{\pm}33.1$) and lower than vitamin C($0.57{\pm}0.02$) by $6.4{\pm}0.3{\mu}g/m{\ell}$. An inhibitory effect on melanin synthesis was higher in hemolymph compared to Morus bark and arbutin by 9.15% and 11.56%, respectively. An inhibitory effect on tyrosinase activity was higher in hemolymph than Morus bark and lower than arbutin. Effect of hemolymph $45{\mu}g/m{\ell}$ on suppressing of tyrosinase was almost 90%. Thus, these results suggest that hemolymph of matured silkworm may have beneficial properties as a material for cosmetics.

• Membrane Journal
• /
• v.25 no.1
• /
• pp.48-59
• /
• 2015

This paper reports a fabrication of poly(L-lactic acid) (PLLA) scaffold membranes through phase separation process using pure and mixed solvents. Chloroform and 1,4-dioxane were used as pure solvents and mixed solvents were obtained by mixing the pure solvents together. Morphologies, mechanical properties and mass transfer characteristics of the scaffold membranes were investigated through SEM, stress-strain test and glucose diffusion test. Scaffold membranes from the solution with pure chloroform showed solid-wall pore structure. In contrast, nano-fibrous membranes were fabricated from the solution with pure 1,4-dioxane. In case of mixed solvents, the scaffold membranes showed various structures with changing composition of the solvents. When 1,4-dioxane content was lower than 20 wt% in the solvent, scaffold membrane showed solid-wall pore structure. When the content was 20 wt%, scaffold membranes with macropores with the maximum size of $100{\mu}m$ was obtained. In the concentration range of 1,4-dioxane over 25 wt%, the scaffold membranes showed nano-fibrous structures. In this range, the fibers showed different diameters with changing composition of the solvent. The minimum fiber diameter was about $15{\mu}m$, when 1,4-dioxane composition was 80 wt%. These results indicate that the composition of the solvent showed a significant effect on the structure of scaffold membrane.

• Journal of the Microelectronics and Packaging Society
• /
• v.14 no.4
• /
• pp.43-48
• /
• 2007

This study is focused on the effect of the surface properties for the post electrode, which is used in pad formation consisted of SMT such as IC, passive component, combined with fired LTCC substrate, We carried out the surface microstructure of sintered electrode and the basic reliability evaluations with sample fired by microwave sintering to solve the problems occurred in post electrode by electric sintering. We evaluated surface densification status of post electrode according to various conditions of microwave sintering. In additions, it is obtained strong effect on blister improvement of post electrode because of over-sintering and the insufficient out gas in bum out process. As a result of adhesion strength, we confirmed $44.3N/mm^2$ in microwave sintering and $34.5N/mm^2$ in electric sintering, respectively. This result will be used for the basic reliability test. Finally, microwave sintering seems to be economic in process time with 30 min compared to electric sintering with 10 hr. In terms of Mass production and efficiency, microwave sintering are excepted to be higher than electric sintering.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3348-3354
• /
• 2011

Oleanolic acid (OA) as template molecule, polyamide-6 (PA6) as basement membrane and poly(styrene-comaleic acid) (PSMA) were used to prepare PA6/PSMA-OA molecularly imprinted composite membranes by phase inversion method in supercritical $CO_2$ ($ScCO_2$). The template molecule (OA), [poly(styrene-co-maleic anhydride) (PSMAH), PSMA, molecularly imprinted membranes (MIMs) imprinting OA and MIMs after elution were all characterized by Fourier transform infrared spectroscopy (FTIR). The conditions that were the mass ratio between PSMA and OA from 3:1 to 8:1, temperature of $ScCO_2$ from $35^{\circ}C$ to $50^{\circ}C$ and pressure of $ScCO_2$ 12 MPa to 17 MPa were studied. It was obtained the largest adsorption rate and purity of OA after adsorption of the resultant MIMs, 50.41% and 96.15% respectively. After using PA6 film and non-woven fabrics as basement membrane respectively, it was found that smaller aperture of PA6 was used as basement membrane, a higher adsorption rate and a higher purity of OA after adsorption of the MIMs were obtained, and so were the stability and reproducibility of the resultant MIMs. After template molecules being removed, the MIMs had effective selectivity hydrogen bonding to separately bind in the binary components to the template molecules-oleanolic acid.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.4
• /
• pp.546-554
• /
• 2007

Statement of problem: Die materials require abrasion resistance, dimensional stability with time, and high surface wettability for adequate material properties. Wear of gypsum materials is a significant problem in the fabrication of accurately fitting cast prosthetic devices. So It has been recommended that the use of die hardener before carving or burnishing of the wax pattern. Purpose: The purpose of this study was to compare the abrasion resistance and surface microhardness(Knoop) with 3 commonly used gypsum die materials(MG Crystal Rock, Super plumstone, GC $FUJIROCK^{(R)}$ EP) with and without the application of 2 die hardeners. Material and methods: Three die materials were evaluated for abrasion resistance and surface microhardness after application of 2 die hardeners(Die hardener and Stone die & plaster hardener). Thirty specimens of each gypsum material were fabricated using an impression of resin die(Pattern resin; GC Corporation, Japan) with 1-mm high ridges, sloped 90 degrees. Gypsum materials were mixed according to manufacturer's recommendations and allowed to set 24 hours before coating. Specimens were arbitrary assigned to 1 of 3 treatment subgroups (n=10/subgroup): no treatment(control), coated with Die hardener, and coated with Stone die & plaster hardener. Abrasion resistance(measured by weight loss) was evaluated using device in 50g mass perpendicular to the ridges. Knoop hardness was determined by loading each specimen face 5 times for 15 seconds with a force of 50g. A scanning electron microscope was used to evaluate the surface of specimens in each treatment subgroup. Conclusions: The obtained results were as follows: 1. 3 types of die stone evaluated in this study did not show significant differences in surface hardness and abrasive resistance(P<.05). 2. In the abrasive resistance test, there were no significant differences between GC $FUJIROCK^{(R)}$ EP and MG Crystal Rock with or without 2 die hardener(P<.05). 3. Super plumstone treated with Stone die & plaster hardener showed increased wear loss(P<.05) 4. Die hardener coatings used in this study decreased the surface hardness of the gypsum material(P<.05).