• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.88-93
• /
• 1998

Since rattling noise, which occur in mechanical linkage with free play or glove boxes in passenger cars, play an important role in the generation of industrial noise and vibration, it is interest to study these dynamics. A difference equations are derived which described the motions of a mass constrained by pre-compressed spring and forced by a high frequency base excitation. Two types of saddle are founded from these difference equations and the stable and unstable manifolds are constructed in these saddle point. For a certain region in a parameter space of exciting displacement and coefficient of restitution, transversal intersections of stable and unstable manifolds exist. Therefore it is founded that there are large families of periodic and irregular non-periodic motions in rattling system i.e. chaos motion is observed.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.1
• /
• pp.43-45
• /
• 2002

We have theoretically investigated steady-state carrier transport and current self-oscillation in negative-effective-mass (NEM) p$\^$+/pp$\^$+/diodes. The current self-oscillation here is a result of the formation and traveling of electric field domains in the p base having a NEM. The dependence of self-oscillating frequency on the applied dc voltage is obtained by detailed numerical simulations. In the calculations, we have considered the scatterings by carrier-impurity, carrier-acoustic phonon, carrier-polar-phonon, and carrier-nonpolar-phonon-hole interactions . This kind of NEM oscillator allows us to reach a current oscillation with terahertz frequency, thus it may be used as a broadband source of terahertz radiation.

• Journal of Korean Elementary Science Education
• /
• v.23 no.1
• /
• pp.27-36
• /
• 2004

This paper aims to examine how well university students, who are going to be primary school teachers, understand the International System of Units (SI), focusing on seven basic units such as 'm', '㎏', '㏖', 'A', 'K', 's', 'cd'. This study specifically investigates whether the students know the seven units and understand their uses and how they read and learn them. The subjects were 1030 students from the University of Education in Jinju, Geongsangnamdo. Data was collected through a questionnaire which was designed by this researcher and checked by an authority, and the frequency and percentage of reponses to each question were obtained and analysed. Findings show all the students knew very well that 'm' and '㎏' are included in the seven units, compared to the others which low percentage of the students considered as the elements. In terms of understanding of use, the units of the length 'm', the mass '㎏', and the time 's' are well understood, presumably, because they are often used in ordinary life and school, while the amount of substance '㏖', the electric current 'A', the thermodynamic temperature 'K', and the luminous intensity 'cd' are not as well understood. It is probably because 'A', 'cd', and 'K' are hardly used in everyday life. With respect to reading the units, the subjects read 'm', '㎏', '㏖', and's' much better than the others. As for the source of learning them, most students answered they learned them in schools, which implies school education is very important. From these results it is concluded that school education should be accompanied with use in everyday life for understanding and using the units. SI Base Units understanding was investigated by an academic year. According to this investigation, generally the right answer rate differed 4<2<3<1 by an academic year in order. For the Senior, Sophomore appeared the right answer rate more high. because, they learned before in deepening or elementary course on chemistry and physics related with SI Base Units. On the other hand, for the junior answered low rate by this reason that they couldn't remember about SI Base Units that learned before. For the Freshman appeared low rate by this reason that they were not learned or graduated from the department of liberal art in high school.

• Journal of KSNVE
• /
• v.6 no.2
• /
• pp.215-224
• /
• 1996

Active vibration control is generally used to reduce vibration level by the actuators based on measured signal. Dynamic properties of a structure can be easily modified by the active vibration control, so that the vibration level may be effectively reduced to the magnitude below the allowable limit over a wide frequency rangs. In this paper, an instantaneous optimal control algorithm including acceleration feedback is presented for the active vibration control of large structures considering facts that the acceleration response can be easily measured, but the displacement and velocity response are obtained by numerically integrating the measured acceleration response with some errors. The adverse effect of the time delay is overcomed by taking into account the dynamic characteristics of an actuator and filters in the design of controller. Performance test is carried out using a hydraulic active mass driver on a test structure$(L{\times}W{\times}H;=;1200mm{\times}800mm{\times}1600mm, about;500kg)$ supported by four columns under base excitations. It is confirmed that the vibration level of the test structure are reduced to about 1/6 near resonance.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1196-1200
• /
• 2004

Micropump is very useful component in micro/nano fluidics and bioMEMS applications. In this study, a bubble-powered micropump was fabricated and tested. The micropump consists of two-parallel micro line heaters, a pair of nozzle-diffuser flow controller and a 1 mm in diameter, 400 ${\mu}m$ in depth pumping chamber. The two-parallel micro line heaters with 20 ${\mu}m-width$ and 200 ${\mu}m-length$ were fabricated to be embedded in the silicon dioxide layer of a wafer which serves as a base plate for the micropump. The pumping chamber, the pair of nozzle-diffuser unit and microchannels including the liquid inlet and outlet port were fabricated by etching through another silicon wafer. A glass wafer (thickness of $525{\pm}15$ ${\mu}m$) having two holes of inlet and outlet ports of liquid serve as upper plate of the pump. Finally the silicon wafer of the base plate, the silicon wafer of pumping chamber and the glass wafer were aligned and bonded (Si-Si bonding and anodic bonding). A sequential photograph of bubble nucleation, growth and collapse was visualized by CCD camera. Clearly liquid flow through the nozzle during the period of bubble growth and slight back flow of liquid at the end of collapsing period can be seen. The mass flow rate was found to be dependent on the duty ratio and the operation frequency. As duty ratio increases, flow rate decreases gradually when the duty ratio exceeds 60%. Also as the operation frequency increases, the flow rate of the micropump decreases slightly.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.12
• /
• pp.1942-1949
• /
• 2004

SLA(Scanned Linear Array) is a portable display unit for implementing next-generation virtual realities, utilizes a design that light generated by a line of LEDs is reflected from the rapidly oscillating mirror to generate a raster display. Reaction forces generated by the motions of the mirror and counter-balance mass cancel each other at the device base, reducing vibration. Metal leaf springs have been extensively applied in such portable units. Magnetic springs have been developed and adopted that can replace the metal spring and can avoid many disadvantages of metal springs. We model and analyze the dynamics of the structure with magnetic springs and present the simulation and experimental analysis results, which can be utilized for identifying and eliminating possible problem sources in removing shaking forces and moments, and oscillating the mirror at the required amplitude and frequency. Finally, we present the improved novel magnetic actuator model which can be applied in portable display units.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.398-398
• /
• 2016

A triboelectric generator uses the principles of static electrification and electrostatic induction to convert mechanical energy into useful electrical energy. In this work we study a single degree of freedom (SDOF) vibration type triboelectric generator that is initiated by a vibrating source at its base. The system is modeled in Abaqus and the design parameters are systematically explored by their effect on the output. The relationships between the parameters: input force, input frequency, mass, spring stiffness and gap between the plates, are analyzed. Finally, based on initial experiments, and simulation results, a design methodology is formulated. The methodology will provide guidance for application specific design of reliable and effective vibration type triboelectric generators.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.63-68
• /
• 2007

This paper presents vibration control performance of an active hybrid mount featuring piezostack actuators. The proposed hybrid mount is devised by adopting piezostack as an active actuator and rubber as a passive element. After experimentally identifying actuating force characteristics of the piezostack and dynamic characteristics of the rubber, the hybrid mount was designed and manufactured. Subsequently, a vibration control system with a specific mass loading is constructed, and its governing equations of motion are derived. In order to actively attenuate vibration transmitted from the base, a feedforward controller is formulated and experimentally realized. Vibration control responses are then evaluated in time and frequency domains.

• Journal of KSNVE
• /
• v.9 no.3
• /
• pp.517-524
• /
• 1999

Mathematical formulas for multi-dimensional isolation analysis via vibrational power transmission can be derived in a rather simple form when the wave effects of the isolators are completely neglected. With increase of frequency range of interest, however, the wave effects play a very important role and hence cannot be neglected. The formulas get involved accordingly. In this study, a method of equivalent stiffness modeling of the isolators to include the wave effects is proposed in such a way that not only the complexity of the mathematical expressions but also that of experiments of necessity can be reduced. This method is illustratively applied to a two-dimensional vibration isolation system with nonrigid source and base structures.

• Journal of Biomedical Engineering Research
• /
• v.34 no.4
• /
• pp.218-225
• /
• 2013

In this paper hair bundle feature model and integration method for hair cell models were proposed. The proposed hair bundle feature model was based on spring-damper-mass model. Input of integrated vestibular hair cell model was frequency and output was interspike interval of hair cell that was reflected the feature of hair bundles. Irregular afferents that had a great gain variation showed reduction of negative stiffness section. Regular afferents that had a small gain variation, however, showed same feature with base negative stiffness feature. As a result, integrated vestibular hair cell model showed almost the same modeling data with experimental data in the modeled eleven frequency bands. It is verified that the proposed model is a good model for hair bundle feature modeling.