• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1099-1105
• /
• 2006

In this paper, the equivalent circuit model of a Rosen-type multilayer piezoelectric transformer(MPT) has been proposed based on the Mason's equivalent circuit model and the principle of single layer piezoelectric plate. From the piezoelectric direct and converse effects, the symbolic expressions between the electric inputs and outputs of the MPT have been derived from the equivalent circuit model. A simplified equivalent circuit model of the MPT whose driving part has a single input form has been proposed. The symbolic expressions of the driving part have been derived from the simplified equivalent circuit model and the model was compared with the multi-input equivalent circuit model through the simulation. In the comparisons between the simulation results and the experimental data, output voltage is 630 Vp-p in case of 11-layered MPT and 670 Vp-p for 13-layered MPT over the experiment range. As the load resistance increases, output voltage increases and saturates over $300k{\Omega}$ and the resonant frequency changes from 102 kHz to 103 kHz. The simulation and the experimental results agree well over different load resistances and frequencies.

• 한국조리학회지
• /
• 제20권5호
• /
• pp.22-28
• /
• 2014

This research proposes and empirically tests a model of the relationships among perceived food quality, perceived service quality, perceived environment quality, brand preference, trust, satisfaction and favorable recipient behavior within the context of luxury restaurant patronage. Hypotheses implied by the model are tested on a sample of 398 patrons of U.S. luxury restaurants. Findings revealed that perceived food quality, perceived service quality, and perceived environment quality positively effect on the brand preference, and the brand preference positively and directly influence on favorable recipient behaviors as well as trust and satisfaction. These findings are discussed in terms of both academic and practitioner implications.

• Wind and Structures
• /
• 제13권4호
• /
• pp.363-374
• /
• 2010

Appropriate scaling methods for wind tunnel modelling of building internal pressures induced through a dominant opening were investigated. In particular, model cavity volume distortion and geometric scaling of the opening details were studied. It was found that while model volume distortion may be used to scale down buildings for wind tunnel studies on internal pressure, the implementation of the added volume must be done with care so as not to create two cavity resonance systems. Incorrect scaling of opening details was also found to generate incorrect internal pressure characteristics. Furthermore, the effective air slug or jet was found to be longer when the opening was near a floor or sidewall as evidenced by somewhat lower Helmholtz frequencies. It is also shown that tangential flow excitation of Helmholtz resonance for off-centre openings in normal flow is also possible.

• Wind and Structures
• /
• 제12권3호
• /
• pp.179-204
• /
• 2009

A physical and numerical steady flow impinging jet has been used to simulate the bulk characteristics of a downburst-like wind field. The influence of downdraft tilt and surface roughness on the ensuing wall jet flow has been investigated. It was found that a simulated downdraft impinging the surface at a non-normal angle has the potential for causing larger structural loads than the normal impingement case. It was also found that for the current impinging jet simulations, surface roughness played a minor role in determining the storm maximum wind structure, but this influence increased as the wall jet diverged. However, through comparison with previous research it was found that the influence of surface roughness is Reynolds number dependent and therefore may differ from that reported herein for full-scale downburst cases. Using the current experimental results an empirical model has been developed for laboratory-scale impinging jet velocity structure that includes the influence of both jet tilt and surface roughness.

• 한국수자원학회논문집
• /
• 제46권2호
• /
• pp.99-109
• /
• 2013

유역 환경에 대한 복잡성의 증가는 단일 의사결정자들이 의사결정문제의 모든 부분을 고려하는 것을 점점 더 불가능하게 만들기 때문에 불확실성은 더욱 증가하게 된다. 따라서 본 연구는 그룹의사결정기법을 사용하여 우리나라 공간적인 홍수 취약성을 정량화하는 접근법을 제시하였다. 개인의 선호도를 분석하기위해 Fuzzy TOPSIS를 사용하였고 개인선호도의 통합을 위해 Borda count, Condorcet 그리고 Copeland 방법을 사용하였다. 마지막으로 도출된 결과를 Fuzzy TOPSIS 및 TOPSIS의 결과와 비교하였고 스피어만 순위상관계수와 켄달의 순위상관계수, Emond와 Mason이 제시한 순위상관분석을 이용하여 순위의 일치성을 검토하였다. 그 결과 일부 지역의 취약성 순위가 큰 폭으로 역전되는 현상을 보였다. 그룹의사결정 개념을 반영하여 지역별 취약성을 산정할 경우 우선순위의 변동이 클 수 있으므로 홍수 취약성 산정시 본 연구에서 제시된 모델을 고려할 필요가 있다.

• Ocean Science Journal
• /
• 제41권1호
• /
• pp.1-10
• /
• 2006

Total sea surface temperature (SST) in a coupled GCM is diagnosed by separating the variability into signal variance and noise variance. The signal and the noise is calculated from multi-decadal simulations from the COLA anomaly coupled GCM and the interactive ensemble model by assuming both simulations have a similar signal variance. The interactive ensemble model is a new coupling strategy that is designed to increase signal to noise ratio by using an ensemble of atmospheric realizations coupled to a single ocean model. The procedure for separating the signal and the noise variability presented here does not rely on any ad hoc temporal or spatial filter. Based on these simulations, we find that the signal versus the noise of SST variability in the North Pacific is significantly different from that in the equatorial Pacific. The noise SST variability explains the majority of the total variability in the North Pacific, whereas the signal dominates in the deep tropics. It is also found that the spatial characteristics of the signal and the noise are also distinct in the North Pacific and equatorial Pacific.

• Journal of Communications and Networks
• /
• 제16권1호
• /
• pp.67-80
• /
• 2014

Spectrum sensing is vital for secondary unlicensed nodes to coexist and avoid interference with the primary licensed users in cognitive wireless networks. In this paper, we develop models for bounding interference levels from secondary network to the primary nodes within a spectrum sensing framework. Instead of classical stochastic approaches where Poisson point processes are used to model transmitters, we consider a more practical model which takes into account the medium access control regulations and where the secondary Poisson process is judiciously thinned in two phases to avoid interference with the secondary as well as the primary nodes. The resulting process will be a modified version of the Mat$\acute{e}$rn point process. For this model, we obtain bounds for the complementary cumulative distribution function of interference and present simulation results which show the developed analytical bounds are quite tight. Moreover, we use these bounds to find the operation regions of the secondary network such that the interference constraint is satisfied on receiving primary nodes. We then obtain theoretical results on the primary and secondary throughputs and find the throughput limits under the interference constraint.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1140-1142
• /
• 1995

The transformer is fabricated with two piezoelectric vibrator with the divided electrodes and adhesive insulator. We applied the electric input to the driving vibrator in parallel and connect the output voltage to the generating vibrator in series to the resistor load near its fundamental resonance frequency. Then we investigate output voltage in series twice as large as in parallal. Moreover we investigate the load characteristics at resonance frequencies under various resistor and the frequency characteristics near the resonance frequency under no load. Its equvalent circuit is derived from the Mason's model of a thickness-driven piezelectric vibrator. By its equevalent circuit, symbolic expressions for input impedances, voltage ratios, resonance frequencies, and bandwidths have been derived. The values calculated from those symbolic exprssions are shown to agree well with the measurement values.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.489-492
• /
• 2000

Film Bulk Acoustic Wave Resonator(FBAR) used in microwave region was analyzed with Finite Difference Time-Domain Methods(FDTD) in this paper. FBAR have been analyzed with one dimensional Mason model analysis or Finite Element methods(FEM), but the first couldn't analyze effect of area variation and spurious characteristics, the second had difficulty in element separation because of thin electrode. So in this paper FBAR was analyzed by Finite Difference Time-Domain Methods and it's results were transformed to frequency domain using Discrete Fourier Transform.

• Wind and Structures
• /
• 제12권1호
• /
• pp.77-88
• /
• 2009

A pulsed impinging jet is used to simulate the gust front of a thunderstorm downburst. This work concentrates on investigating the peak transient loading conditions on a 30 mm cubic model submerged in the simulated downburst flow. The outflow induced pressures are recorded and compared to those from boundary layer and steady wall jet flow. Given that peak winds associated with downburst events are often located in the transient frontal region, the importance of using a non-stationary modelling technique for assessing peak downburst wind loads is highlighted with comparisons.