• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.5
• /
• pp.333-338
• /
• 1999

Thin film inductors of $10 mm \times 10 mm$ with inner coil type of 14 turns were fabricated by sputtering, photo-masking, and etching processes. Their characteristics of impedances and annealing after were investigated. The properties of impedances of the thin film magnetic core inductors with inner coil type were improved by magnetic field annealing due to the removal of residual stress and the improvement magnetic properties of magnetic films. But the characteristics of frequency of the thin film magnetic core inductors were not improved by magnetic field annealing due to properties of the spiral pattern and inner coil type. The thin film magnetic core inductor annealed by uniaxal field annealing method showed an inductance of 1000 nH and resistance of$ 6 \Omega$ of 1 at 2 MHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.3
• /
• pp.493-505
• /
• 1997

In this paper, a wavelet image compression method using human visually estimated quantizer is proposed. The quantizer has three components. These are constructed by using effects of frequency band, background luminance, and spatial masking. The first quantization factor is a fixed constant value for each band. The second factor is calculated by averaging four wavelet coefficients in the lowest frequency band. The third factor is determined by the difference between wavelet coefficients in the lowest frequency band. Arithmetic coding is used for encoding quantized wavelet coefficients. Coefficients in the lowest band are transmitted without loss. Therefore the compressed image is decompressed by using three quantization factors which can be calculated in the receiver. Compared with previous image compression methods which adopted human visual system, the proposed method shows improved results with less computational cost.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.155-158
• /
• 2008

In 1989, Kocher et al. introduced Differential Power Attack on block ciphers. This attack allows to extract secret key used in cryptographic computations even if these are executed inside tamper-resistant devices such as smart card. Since 1989, many papers were published to improve resistance of DPA. At FSE 2003 and 2004, Akkar and Goubin presented several masking methods to protect iterated block ciphers such as DES against Differential Power Attack. The idea is to randomize the first few and last few rounds(3 $\sim$ 4 round) of the cipher with independent random masks at each round and thereby disabling power attacks on subsequent inner rounds. This paper show how to combine truncated differential cryptanalysis applied to the first few rounds of the cipher with power attacks to extract the secret key from intermediate unmasked values.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2622-2624
• /
• 2001

In this thesis, speaker separation is employed when speech from two talkers has been summed into one signal and it is desirable to recover one or both of the speech signals from the composite signal. This paper proposed the method that separated the summed speeches and proved the similarity between the signals by the cross correlation between the signals for exact between original signal and separated signal. This paper uses frequency sampling method based on sinusoidal model to separate the composite signal with vocalic speech and vocalic speech and noise masking method based on psycoacoustics model to separate the composite signal with vocalic speech and nonvocalic speech.

• Communications for Statistical Applications and Methods
• /
• v.3 no.2
• /
• pp.53-67
• /
• 1996

Numerous classical as well as robust methods have been proposed in the literature for the detection of multiple outlier in multivariate data. The effectiveness and power of each of these methods have not been thoroughly investigated. In this paper we first reduce the vast number of outlier detection methods to a small number of viable ones. This reduction is based on previous work of other researches and on some theoretical arguments. Then we design and implement a Monte Carlo experiment for comparing these methods. The main goal of our study is to determine which methods are most powerful in the detection of multiple outlier and in dealing with the masking and swamping problems. The results of the Monte Carlo study indicate that two of the methods seem to hace better performances than the others for the detection of multiple outlier in multivariate data.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.341-346
• /
• 2000

The effect of OTS(octadecyltrichlorosilane) SAM(self-assembled monolayer) on the micro-adhesion has been studied. OTS SAM was formed on the Si(100) surface and SPM (scanning probe microscope) tips with different radius of curvature were fabricated by a series of masking and etching processes. Pull-off forces of different tips on Si and OTS SAM surfaces were measured by SPM in different relative humidities. The surface of OTS SAM was changed to hydrophobic surface and the micro-adhesion force of OTS SAM was lower than that of pure Si. As the tip radius of curvature and the relative humidity increased. the micro-adhesion force increased. Based on the test results. the main parameter affected to the micro-adhesion was absorbed humidity on the surface.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.18-22
• /
• 2000

An experimental study was carried out to investigate the effect of nano-contact condition on the nano-adhesion phenomena. SPM(scanning probe microscope) tips with different radius of curvature were fabricated by a series of masking and etching processes. DLC(diamond-like carbon) and W-DLC (tungsten-incorporated diamond-like carbon) were coated on (100) silicon wafer by PACVD(plasma assisted chemical vapor deposition). Pull-off forces of Pure Si-wafer, DLC and W-DLC were measured with SPM(scanning probe microscope). Also, the same series of tests were carried out with the tips with different radius of curvature. Results showed that DLC and W-DLC showed much lower pull-off force than Si-wafer and Pull-off force increased with the tip radius.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.855-860
• /
• 2001

As being inconvenient to apply reinforced concrete structure to high-rise buildings. it is applied steel structured system. Therefore light-weight wall systems are applied as partition wall to reduce the self-load of the building. But. the required performances of a light-weight wall are not evaluated systematically. As a field survey result. partition walls of house-to-house and room-to-room were not showed their respected performances. so the dwellers are feel so worse the quality of the whole building. In steel-structured high-rise buildings especially. occupant's dissatisfaction concerned indoor noise was high because curtain wall systems having a high air-tight performance isolate the outdoor noise making masking effect. Also to suppress indoor air movement. stact effect must be concerned. Therefore wall systems which have high performances of sound insulation and air-tightness are required in high-rise buildings.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1114-1119
• /
• 2001

Previously, we have analyzed Vehicle interior noise by dBA based analysis. However, dBA based analysis can not describe the various sound phenomenon that consumer hear. Sound quality matrics can describe various sound phenomenon that dBA based analysis could not explain. In this paper, we will demonstrate the difference of between dBA based analysis and real sound feeling, and analyze sound examples by sound metrics and Principle Component Analysis. In this way we can analyze vehicle interior noise more effectively.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.635-640
• /
• 2003

본 논문에서는 일본 차량 번호판 인식에 적응적 탬플릿 마스킹 방법을 이용하여 번호판 문자, 숫자를 분할하고 패턴벡터기법을 이용하여 인식하는 방법을 제안하였다 주, 야간과 거리에 따른 일본 차량 번호판 영상을 입력받아 전처리 과정을 수행한 후 에지 정보와 명도값 변화의 빈도수를 이용하여 번호판 영역을 검출하였다 검출된 번호판 영역에서 각 문자 및 숫자의 위치정보와 적응적 탬플릿을 이용하여 분할하고 번호판의 지역문자를 무게중심 패턴으로 분류 한 다음 크기와 이동에 무관한 특실을 가지는 패턴 벡터를 적용하여 문자를 인식하였으며, 숫자는 Four Segment Pattern을 이용하여 인식하도록 하였다 본 논문에서 제안한 방법을 실제 일관 차량 번호판 인식에 적용한 결과 98.8％ 추출율과 96.6％의 인식율을 나타내었다.