• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.5
• /
• pp.313-323
• /
• 2016

With the development of autonomous vehicle, there has been active research on advanced driver assistance system for road marking detection using vision sensor and 3D Laser scanner. However, vision sensor has the weak points that detection is difficult in situations involving severe illumination variance, such as at night, inside a tunnel or in a shaded area; and that processing time is long because of a large amount of data from both vision sensor and 3D Laser scanner. Accordingly, this paper proposes a road marking detection and classification method using single 2D Laser scanner. This method road marking detection and classification based on accumulation distance data and intensity data acquired through 2D Laser scanner. Experiments using a real autonomous vehicle in a real environment showed that calculation time decreased in comparison with 3D Laser scanner-based method, thus demonstrating the possibility of road marking type classification using single 2D Laser scanner.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.8 no.1
• /
• pp.69-79
• /
• 2006

The purpose of this study is to find the proper width of fabric which can bring high efficiency on productivity. We focus on the marking method by comparing and analyzing the marking efficiency of A-line skirt. This study employs 4 criteria to mark the A-line skirt, which are cutting method, angle, width, and direction, respectively. There can be 2 different cutting methods(fold pattern and add seam pattern at the front and back center line), and 2 different angles(warp angle and bias angle). Also, width of the fabric can be classified into 2 groups(110cm, 150cm), and marking direction can be grouped into 2(one direction marker and one direction per each size marker). These 4 criteria make 16($2^*2^*2^*2$) cases for this study. Main findings are follows. First, the skirt with folded at the center line had higher efficiency rate than the skirt with add seam at the center line. Second, the skirt with the 150cm width has higher efficiency rate than that of 110cm. Third, fixing the warp angle has higher efficiency rate than that of fixing the bias angle at the front and back center line. Finally, one direction per each size marker has much higher efficiency than the one direction marker.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.27-37
• /
• 2005

Direct writing technology on the silicon wafer surface is used to reduce the size of the chip as the miniature trend in electronic circuit. In order to improve the productivity and efficiency, the real time quality estimation is very important in each semiconductor process. In laser marking, marking quality is determined by readability which is dependant on the contrast of surface, the line width, and the melting depth. Many researchers have tried to find theoretical and numerical estimation models fur groove geometry. However, these models are limited to be applied to the real system. In this study, the estimation system for the line width during the laser marking was proposed by process monitoring method. The light intensity emitted by plasma which is produced when irradiating the laser to the silicon wafer was measured using the optical sensor. Because the laser marking is too fast to measure with external sensor, we build up the coaxial monitoring system. Analysis for the correlation between the acquired signals and the line width according to the change of laser power was carried out. Also, we developed the models enabling the estimation of line width of the laser marking through the statistical regression models and may see that their estimating performances were excellent.

• The KIPS Transactions:PartC
• /
• v.9C no.5
• /
• pp.743-748
• /
• 2002

In recent research for the Internet, many studies have investigated the Diffserv AS architecture that can provide Quality of Service. However, this architecture still lacks the qualification to provide full use of the bandwidth to the customer In this paper, we propose the TS2W3C (Time Sliding Two Window Three Color) marking algorithm to improve the fair share of bandwidth by enhancing the TSW (Time Sliding Window) marking algorithm. Our proposed mechanism provides the bandwidth relatively more fairly than the TSW mechanism.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1277-1282
• /
• 2015

This paper describes a research for improvement official approval of information processing in national technical qualification. In this paper, we analysis the contents of current exams and propose the new evaluation method of practical exam in information processing fields through grafting new trends of ICT and ability unit, fulfillment criteria in national competency standards(NCS). Also, we have verified the effect of exam through the pilot test. In the future, we will apply the new exams after the revision of guidelines for marking questions by expert group in its duty fields basis on this research

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.82-85
• /
• 2015

This paper describes a research for improvement official approval of information processing in national technical qualification. In this paper, we analysis the contents of current exams and propose the new evaluation method of practical exam in information processing fields through grafting new trends of ICT and ability unit, fulfillment criteria in national competency standards(NCS). Also, we have verified the effect of exam through the pilot test. In the future, we will apply the new exams after the revision of guidelines for marking questions by expert group in its duty fields basis on this research.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.4
• /
• pp.16-22
• /
• 2012

In this paper, the forensic marking algorithm is proposed using psychoacoustic model II and MDCT for high-quality audio. The proposed forensic marking method, that inserts the user fingerprinting code of the audio content into the selected sub-band, in which audio signal energy is lower than the spectrum masking level. In the range of the one frame which has 2,048 samples for FFT of original audio signal, the audio forensic marking is processed in 3 sub-bands. According to the average attack of the fingerprinting codes, one frame's SNR is measured on 100% trace ratio of the collusion codes. When the lower strength 0.1 of the inserted fingerprinting code, SNR is 38.44dB. And in case, the added strength 0.5 of white gaussian noise, SNR is 19.09dB. As a result, it confirms that the proposed audio forensic marking algorithm is maintained the marking robustness of the fingerprinting code and the audio high-quality.

• Journal of Broadcast Engineering
• /
• v.18 no.2
• /
• pp.196-203
• /
• 2013

The importance of Digital Rights Protection technologies, especially the forensic marking, is getting larger and larger as the demand for the digital contents is increased. But the technologies for the evaluation of forensic marking is not set up properly due to the conflicts between interested parties and technical difficulties. Therefore to evaluate the performance of forensic marking objectively, image and video modification items/levels and evaluation criteria are essential. This paper suggests the quantitative system for evaluating the performance of forensic marking objectively. By providing the opportunity to evaluate the Digital Rights Protection product in objective and quantitative manner, forensic marking industry can expedite its technology development and consumer can get objective and universally validated performance result. It is expected this technology could help revitalizing the related industries and help expediting the development of forensic mark technologies.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.73-83
• /
• 2012

Effective use of traffic marking can lead to driver's safer driving by speed management and visibility enhancement. One of the critical factors in designing traffic marking is how to incorporate human factor issues into the design process. This study presented a methodology for evaluating the effectiveness of Hi-pass marking on Korean freeways based on kansei engineering. Hi-pass marking scenarios made by a virtual reality tool were used to evaluate the user's perceptions. Various combination of chevron angles and peripheral transverse(PT) bars were used for the evaluation. The results show that the most effective scenario is a combination of 60 degree chevron angle and an askew parallelogramshaped PT bar shaped. It is expected that the proposed method and outcome will be useful for making safer driving maneuvers.

• Journal of Korea Multimedia Society
• /
• v.12 no.5
• /
• pp.767-776
• /
• 2009

The purpose of this paper is to design, implement and test the automatic marking system for programming languages using key-words and boolean operations to solve the processing problems of natural languages. There are accurate grammar systems and key-words in programming languages. Using these characteristics, We have designed, programmed, and tested automatic marking system for programming languages through key-words and boolean operations in this paper. We have categorized programming languages into 7 types as the type of answer and when a professor input any key-words, the system make him put conjunction with the special character. It can be logical expressions instantly so that the system easily operates. We asked 10 students who are majoring in computer engineering to take a test on the paper and web to show how well automatic marking system that we have programmed works. Then We requested 3 professors if the subject problems marked objectively. As a result, automatic marking system proved to be appropriate. We have proposed the way of using key-words and boolean operation for prohibiting huge natural language processing in marking of subjective question. It promotes efficiency rate of programming, objectivity and speed through the transferal to the web for marking since the system prohibits marker to include personal opinion on marking and gives feedback quickly