• Journal of Ocean Engineering and Technology
• /
• v.22 no.6
• /
• pp.88-94
• /
• 2008

The concentration of atmospheric carbon dioxide (CO2), which is one of the major greenhouse gases, continues to rise with the increase in fossil fuel consumption. In order to mitigate global warming the amount of CO2 discharge to the atmosphere must be reduced. Carbon dioxide capture and storage (CCS) technology is now regarded as one of the most promising options. To complete the carbon cycle in a CCS system, a huge amount of captured CO2 from major point sources such as power plantsshould be transported for storage into the marine or ground geological structures. Since 2005, we have developed technologies for marine geological storage of CO2,including possible storage site surveys and basic design of CO2 transport and storage process. In this paper, the design parameters which will be useful to construct on-shore and off-shore CO2 transport systems are deduced and analyzed. To carry out this parametric study, we suggested variations in thedesign parameters such as flow rate, diameter, temperature and pressure, based on a hypothetical scenario. We also studied the fluid flow behavior and thermal characteristics in a pipeline transport system.

• Journal of Korea Port Economic Association
• /
• v.22 no.3
• /
• pp.79-96
• /
• 2006

In this paper, using the gravity model, I examined that the port traffic in the port of Pusan have been influenced by GDP of South Korea, GDP of trading countries, an agreement on maritime transport, maritime transport charge and the local economic integration, etc. In view of the policy implication based on the result of analysis by the gravity model, the port traffic and the transshipment in the port of Pusan is positively influenced by GDP of South Korea, GDP of trading countries and countries on the way of main sea route(LINE). But it is negatively influenced by maritime transport charge. Especially, when a maritime transport charge goes up 1 percentage point, it is estimated that a transshipment decreases about 0.586-0.895 percentage point. So, a maritime transport charge was found to have more effect on a transshipment than a port traffic(except transshipment).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.812-818
• /
• 2023

During the years 2016 to 2020, the Ministry of Oceans and Fisheries embarked on a strategic initiative to develop a comprehensive Korean e-navigation system, which encompassed the establishment of an 'Long Term Evolution for Maritime (LTE-M).' The primary objectives were to proactively align with international navigation standards and enhance maritime safety for small vessels, particularly fishing boats. However, limitations were identified in the utilization of this network, primarily its constrained application for specific purposes. In response to these limitations, this study delves into user-centric investigations through surveys and interviews, with the goal of expanding the horizon of network utilization. User requirements emerged as the result of study, emphasizing the need for broader network applications, a wider range of target users, diverse network utilization methods, and regulatory streamlining. The user-driven insights gleaned from this study hold the potential to inform and shape future legislative measures, fostering more versatile and inclusive LTE-M network utilization for enhanced maritime safety.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.611-619
• /
• 2008

The Ministry of Land, Transport and Maritime Affairs is working on the construction of Nationwide DGPS(NDGPS) with connection to Maritime DGPS Reference Stations and if Chun-cheon Reference Station is to be completed in 2008, DGPS positioning information is available in the whole area of Republic of Korea. Therefore to promote the usage of DGPS surveying information, we measured and panalyzed the accuracy of DGPS. In real-time DGPS positioning accuracy were 0.42m of planar Root Mean Square(RMS) error in static survey and 0.48m of planar RMS error in dynamic survey. We went abreast with RTK comparison measurement. According to these results. DGPS positioning information cannot be applied directly to the GIS construction field, but GIS application fields, requiring the real-time positioning information. can take advantage of it in variable cases.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.04a
• /
• pp.166-166
• /
• 2017

Nowadays, container transport services play a substantial role in global cargo transportation by serving as an intermodal between the exporter and importer. Container shipping has become increasingly important over the past few decades due to its obvious advantages. However, Vietnam's container market has shown severely ongoing competition among numerous domestic and foreign shipping lines resulting in serious consequences occurring such as the freight rates substantially decreasing within the last ten years. In fact, Vietnam's sea lanes have become more defensive to cover the losses of shipping companies. Selection of criteria for competitive evaluation of container transport companies is necessary to help recognize the problems within the enterprise especially relating to its position in the market and from here, business management are able to put strategic plans in place and reasonable policy in order to be able to survive and grow.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.3
• /
• pp.266-273
• /
• 2015

Keeping in mind that there are only limited social, economic and administrative resources for reducing marine casualties, the result of statistical survey showed the loopholes of safe maritime transport system, and rendered that most casualties occurred in coastal waters by human errors. When the IMO Marine Casualty Investigation Code was utilized to reveal any structural vulnerability of the international measures, IMO was required to expand its roles to enhance the interface between Liveware and Environment of SHEL model. So, several risk assessment models were studied and found that Maritime Safety Audit System of the Republic of Korea could be a good example of enhancing safe interface between navigators (Liveware) and the navigational circumstances (Environment). It could be dealt with at IMO level as a tool for applying at human error enforcing waters. International cooperative research for upgrading risk assessment modes should also be future terms of reference.

• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.394-400
• /
• 2023

Unlike advancements on land, the maritime industry has been slow to embrace new technologies, primarily due to user apprehension toward unproven innovations in the development process. The existing paradigm of technology development, marked by expert-oriented and laboratory-centric test environments, often leads to a stagnation of progress at the research stage, as the applicability of the technology remains uncertain. This study departed from the conventional research system and introduced a novel methodology known as a "living lab." This approach aimed to ensure applicability by actively involving field-oriented users throughout the entire lifecycle of technology development, encompassing planning, development, verification, and evaluation. The presentation of a plan for the construction and operation of such a living lab in this study is expected to contribute to establishing an efficient experimentation system for ships that can reflect user opinions in the future and to secure technology applicability in the maritime field.

• Journal of Navigation and Port Research
• /
• v.35 no.7
• /
• pp.597-604
• /
• 2011

An environment of world marine port today is rapidly changing. Importance of a hub port is being maximized along with appearance of a large container ship, and Busan port is also growing with the goal as a hub port of Northeast Asia. Busan port currently has competitive power as the 5th top port in the world, but increase rate of transportation quantity, is low compared to Shanghai port in China and other ports in Northeast Asia. For a port to obtain competitiveness, investment on infrastructures of a port is necessary and also it has close relation with an intraregional port logistics industry. However, a port logistics industry in Busan area has a hard time avoiding a small size due to the government support on major companies. Therefore, this study will analyze difficulties of small port logistics companies and the related companies as to vitalize port logistics industry in Busan area in hopes to help vitalizing regional economy.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.3
• /
• pp.245-251
• /
• 2019

When an offshore foundation is exposed to waves and currents, local scour could develop around a pile and even lead to structural failure. Therefore, understanding and predicting the scour due to sediment transport around foundations are important in the engineering design. In this study, the flow and scour around a monopole foundation exposed to a current were investigated using a method that coupled the computational fluid dynamics (CFD) and discrete element method (DEM). The open source computation fluid dynamics library OpenFOAM and a sediment transport library were coupled in the OpenFOAM platform. The incipient motion of the particle was validated. The flow fields and sediment transport around the monopole were simulated. The scour depth development was simulated and compared with existing experimental data. For the upstream scour hole, the equilibrium scour depth could be reproduced qualitatively, and it was underestimated by about 23%.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.891-897
• /
• 2004

This paper provided a simulation model for transport vehicles that carry container from the ship to yard block and vice versa at automated container terminal with a perpendicular yard layout. Usually, the efficiency of container terminal is evaluated by the productivity of container cranes at apron, and the stevedoring system for transport vehicles and yard cranes should be supported enough to improve productivity of container cranes. Especially, transport vehicle is very important factor in the productivity of container cranes and the performance of transport vehicles are changed according to the number and traveling type of vehicles. For these reason, a method that can estimate productivity of transport vehicle is required Finally, we developed the simulation model to analyze the productivity of transport vehicle and presented the productivity of container cranes for a varying operation of transport vehicles.