• Journal of Advanced Marine Engineering and Technology
• /
• 제38권3호
• /
• pp.262-268
• /
• 2014

본 연구는 2MW급 풍력 발전기용 고속커플링의 요구조건인 유연성과 절연성 및 과부하시 기능부품의 파손을 방지하기 위한 동력 차단기능을 만족하기 위한 구조설계와 검증에 관한 것이다. 커플링의 유연성과 절연기능은 강도와 유연성 및 절연성을 동시에 가지는 유리섬유강화플라스틱을 이용하여 설계하였으며 유한요소해석을 통하여 원소재 두께를 최적화하였다. 또한 이상 토크 발생시 동력전달을 차단하기 위한 토크리미터를 마찰차 형식으로 설계하였다. 시제품의 성능평가를 통하여 설계변수의 타당성을 검증하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권8호
• /
• pp.843-848
• /
• 2015

The objective of this study is to observe and optimize a typical ocean environment and reduce wave reflections in the wave flume. In order to generate ocean waves in the wave flume, a combination of a horizontal piston type wave generator and wave absorbers was installed in the channel. Two probes for measuring the wave heights, i.e., wave level gauges, were used to record the continuous variation of the wave surface, the phase difference, and the maximum (crest) and minimum (trough) points of the propagating waves. In order to optimize the shape and size of the propagating waves, several absorption methods were proposed. Apart from an active wave absorption method, we used methods that involved vertical porous plates, horizontal punching plates, and sloping-wall-type wave absorbers. To obtain the best propagating waves, a sloping-wall-type wave absorber was chosen and tested in terms of the constitutive filling materials and the location and shape of the plate. This study also focused on the theoretical prediction of the wave surface, separating them into the incident and reflective components. From the results, it is evident that the wave absorber comprising a hard filling material exhibits a better performance than the absorber comprising a soft material, i.e., the wave absorber can be a strong sink to control the energy of the incoming wave. In addition, larger wave absorbers correspond to lower reflectance because a larger volume can reduce the incoming wave energy. Therefore, at constant absorber conditions, the reflectance of the wave increases as the wave period increases. Finally, the reflectance of the wave was controlled to be less than 0.1 in this study so that the wave flume can be used to simulate an offshore environment.

• 대한조선학회논문집
• /
• 제50권5호
• /
• pp.334-342
• /
• 2013

In this paper, we analyze the procedure of the design manager for the enhancement of the hull production design process by use of the simulation method. Normally, design manager assigns design jobs according to various methods and estimates the corresponding results. When the construction drawing which is the output of the detail design where a design is dealt by zones, the design manager identifies blocks and analyzes their work difficulties, and assigns jobs to design engineers who are different in capabilities. These processes including the design engineer who can be modeled with man-hours evaluation model are represented in detail as a simulation model. As the high-level modeling for the discrete-event system, we use Event Graph model. And we implemented the simulation using Simkit which is open simulation engine for the discrete-event system. We made the simulation scenario to be written by a user in the scenario generator which is separated from the simulation model, and made the simulation result to be visualized in the form of Gantt chart in a Web. In the scenario of the irregular issuance for various construction drawings which contain different numbers of blocks, we performed the Monte-Carlo simulation according to various assignment methods to find the assignment result that satisfies the mid-term schedule.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.470-475
• /
• 2019

본 논문에서는 진동수주형(OWC: Oscillating Water Column) 파력발전시스템을 위한 30kW 급 계통연계형 PCS(Power Conversion System)을 다룬다. 해양에너지 중 파력 발전은 삼면이 바다인 반도의 특성을 지닌 한국에 적용하기 적합하고 연안재해 시 파력 발전기가 방파제 역할을 하여 피해를 감소시킬 수 있고, 다른 해상 발전과 개발 대상 적지가 일치하므로 통합하여 효율을 증대 시킬 수 있다. 파력발전 방식은 작동 원리에 따라 가동 물체형과 진동수주형, 월파형 등 여러 형태로 구분하며, 설치 형태에 따라 고정식과 부유식으로 구분된다. 본 논문에서는 구조적으로 안정되고 터빈과 발전기의 유지 보수가 비교적 쉬운 진동수주형을 채택하여, 파력발전용 30kW 계통연계형 PCS 토폴로지 및 모델을 제안하고 계통에 안정적으로 전압을 공급할 수 있는 DC link 전압 제어 등 계통연계 시 필요한 제어방법에 대해 설명하였다. 또한 이를 검증하기 위해 시뮬레이션을 수행하였다.

• 한국지리정보학회지
• /
• 제23권4호
• /
• pp.184-207
• /
• 2020

본 연구에서는 GIS기반 적지분석을 적용하여 조류-양수 융합발전시설의 설치후보지역을 도출하는 것을 목표로 하였다. 연구대상지역은 진도 일대 서남해 해역이며, 융합발전시설의 설계 및 설치 특성을 고려하여 적지분석을 위한 고려인자를 도출하였다. MOHID(Modelo HIDrodin?mico)를 이용하여 조류 수치모의를 수행하였고, 모의 결과를 공간자료로 변환하였다. 이후 본 연구에서는 제안하는 GIS기반 중첩분석 방법을 적용하여 설치후보지역을 도출하였다. 연구 결과에서 총 10개 지역이 후보지역으로 도출되었으며, 이 중 진도, 성남도, 하조도가 상대적으로 넓은 해역에 대해 조류-양수 발전기 설치가 가능한 것으로 판단되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.129.1-129.1
• /
• 2010

Since the commencement of the fuel cell business in 2007, POSCO POWER has been the major supplier of the MCFC (Molten Carbonate Fuel Cell), which is the most commercialized stationary fuel cell system in the world. With its quite, yet active movement, more than 20MW MCFC systems have been installed and are operating in Korea. While trying to localize the components and set up a firm supply chain in Korea to provide more reliable and cost-competitive products to its customers, POSCO POWER is also devoting itself to developing new MCFC application products. One such product is a back-up power system, in which a back-up algorithm is embedded to the present system so that the product can work as a back-up generator in case of grid failure. The technology to enhance load following capability of a stack module is also being developed with the back-up algorithm. Another example is a building application, the goal being to make the present Sub-MW product suitable for urban area. For this, downsizing and modularization are the main R&D scope. The project for developing ship service fuel cell for APU application will launch soon as well. In the project, a system which can operate in marine environment, and reforming technology for liquid logistic fuel will be developed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.379-381
• /
• 2008

TETRA(Terrestrial Trunked Radio) is a digital trunked radio standard developed by the ETSI(European Telecommunications Standards Institute). Currently, TETRA was set Digital TRS in electric power If wireless backbone network. In this time, we use many company's TETRA modem. So, TETRA modem performance evaluation is very important. TETRA modem use two type of Data transfer mode. One is Packet Data using UDP/IP. and the other is SDS(Short Data Service). In this paper, We generate Packet Data using Traffic Generator module. Packet Data transfer 1000 times each 10 bytes to 400 bytes. We analyze transmission delay time, success rate and standard deviation.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.348-358
• /
• 2008

Unlike structures in the air, the vibration analysis of a submerged or floating structure such as offshore structures is possibly only when the fluid-structures is understood, as the whole or part of the structure is in contact with water. Through the comparision between the experimental result and the finite element analysis result for a simple cylindrical model, it was verified that an added mass effects on the cylindrical structure. Using the commercial FEA program ANSYS(v.11.0), underwater added mass was superposed on the mass matrix of the structure. A frequency response analysis of forced vibration in the frequency considered the dynamic load was also performed. It was proposed to find the several important modes of resonance peak for these fixed cylindrical type structures. Furthermore, it is expected that the analysis method and the data in this study can be applied to a dynamic structural design and dynamic performance evaluation for the ground and marine purpose of power generator by wind.

• 제어로봇시스템학회논문지
• /
• 제14권1호
• /
• pp.7-12
• /
• 2008

A GNSS(Global Navigation Satellite System) using GPS provides us with very useful information concerning the positioning of users in many sectors such as transportation, social services, the justice system and customs services, public works, search and rescue systems and leisure. A GNSS using the Galileo satellite is due to work in 2008 and expected to be used in various fields such as aviation, marine transportation, land surveying, resources development precise agriculture, telemetics, and so on. In this paper, we discuss the implementation and testing of a combined GPS/Galileo receiver which we named KSTAR V1.0. Each tracking module of GPS/Galileo dual mode correlator has the five track arms which consist of Very Early code, Early code, Prompt code, late code, and Very late code. Each of 24 tracking modules can be assigned to GPS and/or Galileo signal by changing mode selection register. The basic correlator integration dump period is set to 1ms for GPS C/A code and fast Galileo signal tracking. The performance of the developed combined GPS/Galileo receiver was tested and evaluated using the IF (Intermediated Frequency)-level GPS/Galileo signal generator.

• 한국유체기계학회 논문집
• /
• 제17권2호
• /
• pp.5-11
• /
• 2014

Small hydro power, among other renewable energy resources, has been evaluated to have enough development value because it is a clean, renewable and abundant energy resource. In addition, small hydro power has the advantage of low cost development by using existing facilities like sewage treatment plants, water works and similar resources. But in the case of small hydro power systems, there are problems with degraded operation efficiency of turbine due to changes in flow rates. In order to overcome this, variable speed control can be achieved by using the power rectifier and permanent magnetic synchronous generator(PMSG) as a possible method to respond to the changes in flow rates. In this study, a commercial ANSYS CFD code was used to analyze the performance of 10kW class propeller hydro turbine and to also investigate flow characteristics at variable flow rates and runner vane.