• 제목/요약/키워드: Marine Fuel Oil

검색결과 223건 처리시간 0.026초

디젤기관에서 바이오디젤 혼합유의 배기배출물 특성에 미치는 연료분사시기의 영향 (Effects of Fuel Injection Timing on Exhaust Emissions Characteristics of Biodiesel Blend Oil in Diesel Engine)

  • 임재근;조상곤
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제36권5호
    • /
    • pp.603-608
    • /
    • 2012
  • 요즈음 환경오염 문제와 대체에너지 문제에 관심이 증대되고 있다. 디젤기관은 일반적으로 육상과 해상에서 동력을 생산하는데 사용되고 있는데, 디젤기관의 연소특성과 배기배출물 특성은 기관의 운전시간이 증가함에 따라 연료계통의 마모와 연소실 주위상태의 변화로 달라진다. 본 논문은 약 20여년 사용한 디젤기관에 바이오디젤혼합유를 사용할 경우, 연소특성과 배기배출물 특성에 미치는 연료분사시기의 영향을 고찰하기 위하여 실험적으로 연구하였다. 실험기관의 원래 연료분사시기는 BTDC $22^{\circ}$ CA이었는데, 20여년 운전한 후에 연료소비율과 배기배출물 특성에 대하여 실험적으로 최적의 연료분사시기를 분석한 결과, BTDC $26^{\circ}$ CA로 변경되었음을 알았다.

디젤기관에서의 경유-메탄올 혼합유의 연소 안전성과 연소특성에 관한 연구 (A Study on the Combustion Stability and Characteristics for D.O - Methanol Blending Oil in Diesel Engine)

  • 김상암;왕우경
    • 동력기계공학회지
    • /
    • 제22권1호
    • /
    • pp.48-55
    • /
    • 2018
  • It has recently been reported that methanol fuel has been used in the product carrier with established duel fuel engine, which has been greatly reducing emissions of $CO_2$, NOx and SOx from the engine. However, to use methanol alone as fuel oil in a general diesel engine, design modification of cylinder head is needed because the ignition aid device or the duel fuel injection system is needed. On the other hand, only if the mixer is installed on the fuel oil supply line, diesel oil - methanol blending oil can be used as fuel oil for the diesel engine, but there is a problem of the phase separation when two fuels are mixed. In this study, diesel oil and methanol were blended compulsorily in preventing the phase separation with installing agitators and a fuel oil boost pump on fuel line of a test engine. Also, cylinder pressure and fuel consumption quantity were measured according to engine load and methanol blending ratio, and indicated mean effective pressure, heat release rate and combustion temperature obtained from the single zone combustion model were analyzed to investigate the effects of latent heat of vaporization of methanol on combustion stability and characteristics. As a result, the combustion stability and characteristics of 10% methanol blending oil are closest to the those of diesel oil, and it could be used as fuel oil in existing diesel engines without deterioration of engine performance and combustion characteristics.

선박디젤기관에서 바이오디젤연료의 연소특성에 대한 실험적 연구 (An Experimental Study on Combustion Characteristics of Biodiesel Fuel in Marine Diesel Engine)

  • 조상곤
    • 동력기계공학회지
    • /
    • 제19권3호
    • /
    • pp.29-35
    • /
    • 2015
  • Environmental pollution is produced by consumption of fossil fuel, therefore alternative fuels is interested for development of new energy resources and reduction of exhaust emissions for air pollution prevention. Biofuels are produced from new vegetable oil and animal fat, may be used as fuel without change of engine structure in diesel engine. In this paper, the test results on specific fuel consumption, combustion characteristics of neat diesel oil and biodiesel blends(10 vol.% biodiesel and 20 vol.% biodiesel) were presented using four stroke, direct injection diesel engine, especially this biodiesel was produced from biodiesel fuel at our laboratory by ourselves. This study showed that specific fuel consumption is increased slightly, on the other hand cylinder pressure, rate of pressure rise, rate of heat release and soot were decreased slightly in the case of biodiesel blends than neat diesel oil.

저유황-고유황 혼합연료유의 물리화학적 특성연구 (A Study on Physico-Chemical Properties on Mixed Fuel Oil of Very Low Sulfur Fuel Oil-High Sulfur Fuel Oil (VLSFO-HSFO))

  • 송인철;신수현;김새미;이희진;서정목
    • 해양환경안전학회지
    • /
    • 제26권7호
    • /
    • pp.864-872
    • /
    • 2020
  • 국제해사기구(IMO)의 황함유량 규제에 따르는 저유황연료유는 생산 공정에 따라 다양한 물리화학적 특성을 가지게 된다. 본 연구는 저유황연료유 및 저유황-고유황 혼합연료유의 물리화학적 특성연구 결과를 해양오염 방제대응의 기초자료로 활용하고자 한다. 연구에 사용된 혼합연료유는 황함유량이 0.46 mass%인 저유황연료유와 0.36 mass%인 저유황연료유에 고유황연료유를 25, 50, 75 mass% 혼합하여 제조하였다. 이 혼합연료유에 대해 동점도, 유동점 및 Saturates, Aromatics, Resins, Asphaltenes(SARA)분포 등 물리화학적 특성에 대해 실험실 연구를 하였다. 동점도가 높고 유동점이 낮은 특징의 고유황연료유가 75 mass% 혼합함에 따라, 혼합연료유의 동점도는 350.2 %까지 증가 하였으며, 유동점이 23℃와 -11℃의 저유황연료유는 각각 -3℃ 및 -6℃까지 유동점이 내려가거나 올라갔다. Asphaltenes 분포가 적은 저유황연료유에 고유황연료유를 혼합함에 따라, Saturates분포는 68.8 %까지 감소하고, Asphaltenes분포는 1,417 %까지 크게 증가하였다.

직접분사식 디젤기관에서 연료소비율 및 배기배출물 특성에 미치는 바이오디젤유의 영향 - 유채유를 중심으로 - (Effects of Biodiesel Fuel on Characteristics of Specific Fuel Consumption and Exhaust Emissions in DI Diesel Engine - Using Rape Oil -)

  • 임재근;최순열;김석준;조상곤
    • 해양환경안전학회지
    • /
    • 제14권1호
    • /
    • pp.83-87
    • /
    • 2008
  • 산유국으로부터 에너지 독립을 하고 대기오염방지를 위한 배기배출물을 저감시키기 위하여 대체연료에 많은 관심을 가지고 있다. 폐유나 새로운 식물성 기름과 동물성 기름으로부터 생성할 수 있는 바이오디젤유가 압축점화기관인 디젤기관에 구조적인 변화없이 사용될 수 있다. 이 논문에서는 4행정 직접분사식 디젤기관을 이용하여 순수 디젤유와 바이오디젤 혼합유(바이오디젤 10% 및 20% 함유)의 연료소비율과 배기배출물에 미치는 영향을 제시했으며, 특히 실험에 사용된 바이오디젤 연료는 우리 실험실에서 유채유로부터 직접 생산되었다. 이 연구 결과 바이오디젤 혼합유가 디젤유 보다 연료소비율과 질소산화물은 약간 증가 되었고 일산화탄소와 매연은 상당히 감소되었다.

  • PDF

연료유 가격변동에 따른 컨테이너선대의 경제적 운영방안 (A Study on Economic Operation for Liner-Fleet by Fluctuation of Fuel Oil Price)

  • 이수동;신정훈;김철현;장명희
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2009년도 공동학술대회
    • /
    • pp.173-174
    • /
    • 2009
  • 연료유 비용은 컨테이너 해운 선사에 있어 상당한 비용을 차지한다. 지난 3년 간, 연료유 가격은 상당하게 증가하여 왔다. 컨테이너 해운에서 단기간에 계속적으로 증가하는 연료유 가격의 일부만이 운임애 대한 할증료를 통해서 보완되고 있다. 따라서 수익(earnings)에는 상당한 부정적인 영향을 주게 된다. 본 연구에서는 H선사의 AEX 항로에 대한 유가 및 선박 관련 자본비용에 대한 경제성 분석을 하였다. H선사의 2008년 DAYLY 척당 평균 고정비 31,818 USD 적용 시 연료유 가격이 169.35$/TON 일 때 8척 운항과 9척 운항의 항차당 운영비용이 동일하였다. 현제의 고유가 상황을 고려할 때 연료유 가격이 200$/TON이하로 형성되기 어려울 것으로 예상된다. 따라서 200$/TON이상 일 때 고정비(용선료)가 35,000$이 넘어서더라도 8척 운항 시 보다 9척 운항이 경제성이 있는 것으로 분석되었다.

  • PDF

선박 유수분리기 전처리 장치 성능에 미치는 적층판의 영향 (An Effect of Laminated Plate on the Performance of Pre-separator for Marine Oily Water Separator)

  • 이진열;한원희
    • Tribology and Lubricants
    • /
    • 제16권6호
    • /
    • pp.440-447
    • /
    • 2000
  • It's a tendency to strengthen related international laws as the importance on marine oil pollution recently becomes the issue. According to the regulation of IMO, oil discharge from ships is allowed under 15 ppm only and oil filtering equipment is essential. However, for large ships using heavy fuel oil of over S.G 0.98 and viscosity 380 cSt and system oil, it has been in difficulty to process with existing filtering type of oily water separator. Oily water pre-separator of laminated plate type which is one of gravity type separator has very simple structure and it also makes easier to maintain and repair. In another words, it fits well to process large amount of rich oil with high specific gravity. In this paper, oily water pre-separator of laminated plate type has been studied. The function of emulsified oil and 4 different types of oil have been analyzed and each character has been investigated and proved by experiments. As the result of it, the efficiency of separating oil water has been advanced by 10% in case equipped with pre-separator. In addition, the higher temperature is and the more laminated plate has, it turns out to be getting more effect.

2행정 대형 디젤엔진의 성능향상을 위한 연료첨가제의 실험적 연구 (An Experimental Study of the Fuel Additive to Improve the Performance of a 2-Stroke Large Diesel Engine)

  • 류영현;이영서;남정길
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권6호
    • /
    • pp.620-625
    • /
    • 2015
  • IMO MEPC에서는 지구온난화를 늦추기 위해서, 선박에서 배출되는 GHG(Green House Gas)인 $CO_2$를 줄이기 위한 방안으로 선속을 다운시켜 운항할 것을 제안한바 있으며, 해운회사에서도 연료비 절감을 위해서 자발적으로 감속운항(Low steaming)을 하고 있어, 국제항해에 종사하고 있는 대부분의 컨테이너선들이 감속운항을 하고 있다. 또한, 날로 증가되고 있는 해운 물동량 증가로 선박의 연료비 부담이 증가되고 있어 연료비 절감 기술개발이 절실히 요구되고 있다. 따라서 본 연구에서는 디젤엔진의 성능을 향상시킬 수 있는 연료첨가제(유용성 칼슘계 유기금속화합물)를 일정량 투입(사용 연료량의 0.025%) 하여 연료비를 절감하는 방법을 시도하였다. 실험의 정확도를 위해서 육상 발전소에 설치된 2행정 대형 디젤엔진을 실험 대상으로 하였다. 실험 엔진의 부하는 저, 중 및 고 부하(50, 75, 100%)로 나누어서 실시하였으며, 연료첨가제의 투입 전과 투입 후의 엔진성능(출력, 연료소비율, 최고연소압력(P-max), 배기온도)을 비교 분석 하였다. 본 실험을 통해서 연료첨가제를 투입함으로써 저부하(50%) 에서 2% 이상의 연료비 절감 효과를 확인 할 수 있었으며, 최고연소압력은 상승하는 반면에 배기온도는 하강함을 알 수 있었다.

Some Trends of Marine Engineering and Shipbuilding in Asia (reliability investigation works and their evaluation indices)

  • Hashimoto, Takeshi
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제20권3호
    • /
    • pp.19-28
    • /
    • 1996
  • In Asia countries the productions of ship building and marine engines have been increasing, specially Japanese marine industries have worked hard after 1960s and Korean ones after 1980s. Recently the other countries, as Taiwan and China, have been working so that these hour Asian countries are occuping the high level of shared ratio of productions for gross tonnages and horse powers, which are 74 and 64[%] of the world ones ($8.6\times10$+6[GT], $8.6\times10$+6[PS]) in 1994. Korean industries had the highest shared ratio of production of tanker vessel and 2 stroke diesel engine as 45[%]($2.2\times10$+6[GT]) and 37[%]($1.0\times10$+6[PS]) which were more than those of Japan as 34 and 16[%] in 1989 respectively. Some marine databases and their network links among Asian countries are proposed due to the posibility of collection and analyses with their own specifications by the marine industries and operators as well as Japanese ship reliability investigation works(SRIW) like SRIC in Japan. During 1966 and 1996 16 times of SRIW in Japan have been carried out by ship reliability investigation group(SRIG) in Japan. There have been collected and evaluated a great number of field data of failures and maintenances($700\times10$+3[occ], $1.6\times10$+6[MH}) during running hours($13.4\times10$+6[Hrs]), from which many kinds of evaluation indices could be gotten as the three indices of occurring rate$\lambda$(52.2[occ/1000Hrs]), average man-hour mh(2.29[MH/occ]) and manning index MI(119[MH/1000Hrs]). An estimation example having the three indices$\lambda$, mh and MI were shown by the SRIC 1990 Data Base in Japan for the two kinds of fuel oil suppling subsystems which are dual fuel oil one(DFOS) and mono fuel oil one(MFOS). Three indices MI, and mh for DFOS and MFOS results in 7.16 and 5.20[MH/1000Hrs], 2.63 and 2.06[occ/1000 Hrs]. Therefore the more simple subsystem MFOS can save approximately 30[%] of maintenance load. Finlly an utilization methods are shown for the SRIC in Japan by means of computer system and worlwide internet links.

  • PDF