Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of Fuel Injection Timing on Exhaust Emissions Characteristics of Biodiesel Blend Oil in Diesel Engine

디젤기관에서 바이오디젤 혼합유의 배기배출물 특성에 미치는 연료분사시기의 영향

  • Received : 2012.04.12
  • Accepted : 2012.07.16
  • Published : 2012.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

Recently we have a growing interest in environmental pollution and alternative energy. Diesel engine is generally used to produce the power on shore and sea. However, the combustion characteristics and exhaust emissions of the engine are changed on account of the wear of fuel system and the altered ambient condition of the combustion chamber by the increment of the engine operation hour. Therefore the combustion characteristics and exhaust emissions on the fuel injection timing were experimentally investigated to find out the optimum fuel injection timing in case of the about 20 years used diesel engine using biodiesel blend oil. The original fuel injection timing of the engine is BTDC $22^{\circ}$ CA. However, it is found that the optimum fuel injection as a result of analyzing the specific oil consumption and exhaust emissions of 20 years used the engine is BTDC $26^{\circ}$ CA.

요즈음 환경오염 문제와 대체에너지 문제에 관심이 증대되고 있다. 디젤기관은 일반적으로 육상과 해상에서 동력을 생산하는데 사용되고 있는데, 디젤기관의 연소특성과 배기배출물 특성은 기관의 운전시간이 증가함에 따라 연료계통의 마모와 연소실 주위상태의 변화로 달라진다. 본 논문은 약 20여년 사용한 디젤기관에 바이오디젤혼합유를 사용할 경우, 연소특성과 배기배출물 특성에 미치는 연료분사시기의 영향을 고찰하기 위하여 실험적으로 연구하였다. 실험기관의 원래 연료분사시기는 BTDC $22^{\circ}$ CA이었는데, 20여년 운전한 후에 연료소비율과 배기배출물 특성에 대하여 실험적으로 최적의 연료분사시기를 분석한 결과, BTDC $26^{\circ}$ CA로 변경되었음을 알았다.

Keywords

References

  1. K. W. Schol and S. C. Sorenson, "Combustion of soybean oil methyl ester in a direct injection diesel engine", Journal of Society of Automotive Engineers, 930934. 1993.
  2. V. Pradeep, and R. P. Sharma, "Use of HOT EGR for NOx control in a compression ignition engine fuelled with bio-diesel from Jatropha oil", Renewable Energy, vol. 32, pp. 1136-1154, 2007. https://doi.org/10.1016/j.renene.2006.04.017
  3. Kyunghyun Ryu and Youngtaig Oh, "Combustion characteristics and durability of diesel engines burning BDF 20", Transactions of the Korean Society of Automotive Engineers, vol. 15, no. 3, pp. 18-28, 2007.
  4. David Y. Chang, J. H. Van Gerpen, "Determination of particulate and unburned hydrocarbon emissions from diesel engines fueled with biodiesel", Journal of Society of Automotive Engineers, 982527, 1998.
  5. C. A. Sharp, S. A. Howel and J. Jobe, "The effect of biodiesel fuels on transient emissions from modern diesel engines, Part 1 regulated emissions and performance", Journal of Society of Automotive Engineers, 200011967, 2000.
  6. C. Carraretto and A. Macor et al., "Biodiesel as alternative fuel : Experimental analysis and energetic evaluations", Energy 29, pp. 2195-2211, 2004. https://doi.org/10.1016/j.energy.2004.03.042
  7. J.R. Needham, et.al., "Injection Timing and Rate Control a Solution for Low Emissions", Journal of Society of Automotive Engineers, 900854, 1990.
  8. Noboru Miyamoto, Hideyuki Ogawa, et al., "Analysis of diesel soot formation under varied ignition lag with a laser light extinction method", Journal of Society of Automative Engineers, 900640, 1990.
  9. C. D. Rakopouls and K.A. Antonopoulos et al., "Comparative performance and emissions study of a direct injection diesel engine using blends of diesel fuel with vegetable oils or bio-diesels of various origins", Energy Conversion & Management, vol. 47, pp.3272- 3287, 2006. https://doi.org/10.1016/j.enconman.2006.01.006
  10. S. Bari, T. H. Lim and C. W. Yu, "Effects of preheating of crude palm oil (CPO) on injection system, performance and emission of a diesel engine", Renewable Energy, vol. 27, pp. 339-351, 2002. https://doi.org/10.1016/S0960-1481(02)00010-1
  11. J. K. Lim and S. Y. Choi, "Effects of fuel injection timing on exhaust emissions characteristics in marine diesel engine", Journal of the Korean Society of Marine Engineering, vol. 26, no. 3, pp.307-312, 2002.
  12. 전효중, "선박용 디젤기관의 환경문제", 한국박용기관학회지, 제20권, 제3호, pp. 187-205, 1996.
  13. Soon-Ik Kwon, et. al., "Effects of cylinder temperature and pressure on ignition delay in direct injection diesel engine", Bulletin of the Journal of the Marine Engineering Society in Japan, vol. 18, no. 1, pp.3-16, 1990.
  14. Plee, S.L., Ahamed, T. and Myers, J.P. "Flame temperature correlation for the effects of EGR on diesel particulate and NOx Emissions, Journal of Society of Automotive Engineers, 811195.

Cited by

  1. Effect of pre-post injection timing of diesel fuel for naval vessel on the combustion and emission characteristics in an optically-accessible single cylinder diesel engine vol.38, pp.7, 2014, https://doi.org/10.5916/jkosme.2014.38.7.868
  2. Experimental and numerical analysis of breakup process of biodiesel fuel spray vol.16, pp.7, 2015, https://doi.org/10.1007/s12541-015-0167-1