• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.6
• /
• pp.373-381
• /
• 2016

In this study, we investigate the characteristics of the drag reduction of a circular cylinder having a detached splitter plate at the wake side. We measure the fluid force on a circular cylinder and visualize the field using particle image velocimetry (PIV) with a high Reynolds number, Re = 10,000. The experimental paraeters used were the width ratios (H/B = 0.5~1.5) of splitters to the prism width and the gap ratios (G/B = 0~2) between the prism and the splitter plate. The drag-reduction rate of the circular cylinder increased with H/B in the case of the same G/B, and it increased and then decreased with G/B in the case of the same H/B. The vortices of the opposite direction on the upper and lower sides of the detached splitter plate were generated by installing the plate. Reverse flow was caused by the vortices at the wake region of the circular cylinder, and the drag of the circular cylinder was decreased by the reverse flow.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.21-26
• /
• 2007

The Protocol adopted in Sep. 1997 included the new Annex VI of MARPOL 73/78, which entered into force on 19 May 2005. Revision for the accept MARPOL Annex VI with make public on 29 Dec. 2005 and enforce on 29 Jun. 2006. For all that not installation at oil terminal or if installed do not used. The purpose of this study is to research and evaluate the methods of sampling and analysis, and the pollution measure of existed VOCs during the bulk liquid cargo operation at vessels. As the sampling instrument of VOCs, Tedlar bag has the effect of decrease in concentration by the chemical reaction and absorption, and the method using the solvent extraction has error cause because of the extraction, the absorption tube has error by the breakthrough. But canister is the best sampling instrument because of having no sampling mistake. The study on VOCs emission is not sufficient for the research on the pollution cause and the analysis data on the HAP during the bulk liquid cargo operation at vessels. Hence, monitoring on the management hazardous VOCs need to be continued during the cargo operation at vessels and VOCs management field must be study for the make progress at a good pace for reason of crew's health.

• Strategy21
• /
• s.44
• /
• pp.177-212
• /
• 2018

The purpose of this article is to examine the 'Discussion of maritime defense' which began to be discussed from the late Goryeo dynasty to the early Joseon dynasty and the process of establishing a maritime defense system. Also it can identify changes in the aspects of the naval ship operation and their strategic tactics during the reign of King Sejong. Japanese raiders began a full-scale invasion from 1350 at the late Goryeo Dynasty, So the government realized the need to raise the 'Sea power' and to organize the maritime defense system for defending enemy invasion. for example, the reinforcement of naval forces, construction of warships, develoment of weapon systems and so on. which have achieved remarkable growth while continuing, have also been used to carry out a three-time 'Conquest of Daemado' in 1389, 1396, 1419. Until then, however, it is difficult to interpret that the naval forces had a systematic and organizational combat operation system. According to fighting patterns on combat reports before the early days of King Sejong's reign, Our naval forces had no advantage over the Japanese raiders in terms of their capabilities and tactics. Then, the period of King Sejong marked a watershed in maritime defense history. Based on accumulated experience of naval battles and force Projections, The paradigm shift of the naval strategic tactics for maritime defense has occurred. First, the capability of the naval vessels has improved. for example, ship speed, durability, and weather resistance. Through these efforts, navy forces were able to pursue and attack, destroy enemy's ships by taking advantage of the 'Ship speed superiority'. This has led to tactical shifts from defensive to offensive. Second, purpose to support offensive tactics, the government put a strategic plan into practice that is the forward depolyment of naval bases from the inland to the coast, considering the 'sea environment' and 'threat'. By doing so, Joseon dynasty was able to secure 'the command of the sea'. This may be a little different from the perception of the so-called 'peace period' that King Sejong's era. We need to remember that Joseon dynasty was working hard for its defense. When studying history of maritime defense, these strategic and tactical elements must be fully considered. Only then we can have a coherent understanding of the many naval battles in the past, including the Imjin War(1592-1598).

• Food Science of Animal Resources
• /
• v.28 no.4
• /
• pp.395-400
• /
• 2008

This study was carried out to compare the textural properties of crab-flavored sausage manufactured with six different formulations. We prepared crab-flavored sausage from Alaska pollack surimi as a control by the washing method, and various mixtures of surimi and chicken breast meat were manufactured (pH 11.0) with 33.33% chicken breast meat (CBM) (T1), 50% CBM (T2), 66.66% CBM (T3), 100% CBM (T4) and 20% commercial mechanically deboned chicken meat (MDCM) (T5). Brittleness, gumminess, chewiness, breaking force, gel strength, jelly strength, sensory flavor. texture, and overall acceptability were significantly lower in the formulations containing chicken meat in proportion to the % CBM (p<0.05). However, cohesiveness and springiness were significantly higher in the formulations containing chicken meat in proportion to the amount of CBM (p<0.05). Folding test and deformation values were significantly lower in the surimi manufactured with CBM at pH 11.0. although T5 showed no significant differences relative to the control. Overall, these results indicate that similar textural properties in the crab-flavored sausage were attained when surimi was prepared with 20% CBM and MDCM.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.3
• /
• pp.236-245
• /
• 2021

In this study, a drifting test using a experimental vessel (2,966 tons) in the northern waters of Jeju was carried out for the first time in order to obtain the fundamental data for drift. During the test, it was shown that the average leeway speed and direction by GPS position were 0.362 m/s and 155.54° respectively and the leeway rate for wind speed was 8.80%. The analysis of linear regression modes about leeway speed and direction of the experimental vessel indicated that wind or current (i.e. explanatory variable) had a greater influence upon response variable (e.g. leeway speed or direction) with the speed of the wind and current rather than their directions. On the other hand, the result of multiple regression model analysis was able to predict that the direction was negative, and it was demonstrated that predicted values of leeway speed and direction using an experimental vessel is to be more influential by current than wind while the leeway speed through variance and covariance was positive. In terms of the leeway direction of the experimental vessel, the same result of the leeway speed appeared except for a possibility of the existence of multi-collinearity. Then, it can be interpreted that the explanatory variables were less descriptive in the predicted values of the leeway direction. As a result, the prediction of leeway speed and direction can be demonstrated as following equations. Ŷ₁= 0.4031-0.0032X₁+0.0631X₂-0.0010X₃+0.4110X₄ Ŷ₂= 0.4031-0.6662X₁+27.1955X₂-0.6787X₃-420.4833X₄ However, many drift tests using actual vessels and various drifting objects will provide reasonable estimations, so that they can help search and rescue fishing gears as well.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.4
• /
• pp.205-212
• /
• 2021

Offshore jacket structures generally comprise steel members, and the safety standard for jacket structures typically focuses on the steel components. However, large amounts of concrete grouting is filled in the legs of the Gageocho jacket structure to aid in the recovery from typhoon damage. This paper proposes a safe and lightweight design for the Gageocho ocean research station comprising steel members instead of large amounts of concrete reinforcement in the legs. Based on the actual design, the structural members are grouped according to their functional roles, and the inner diameter of the cross-section in each design group is defined as a design variable. Structural optimization is carried out using a genetic algorithm to minimize the total weight of the structure. To satisfy the conservative safety standards in the offshore field, both the maximum stress and the unity check criteria are considered as design constraints during optimization. For enhanced safety confidence, extreme environmental conditions are assumed. The maximum marine attachment thickness and the section erosion in the splash zone are applied. Additionally, the design load is defined as the force induced by extreme waves, winds, and currents aligned in the same direction. All the loading directions surrounding the structure are considered to design the structure in a balanced and safe manner. As a result, compared with the current structure, the proposed structure features a 45% lighter design, satisfying the strict offshore safety criteria.

• Tribology and Lubricants
• /
• v.39 no.2
• /
• pp.49-55
• /
• 2023

Currently, the demand for green technologies toward a sustainable future is rapidly increasing due to growing concern over environmental issues. Methanol is biodegradable and can provide clean combustion to reduce sulfur oxide and nitrogen oxide emissions, and therefore it is a candidate fuel for marine engines. However, the effect of methanol on tribological characteristic degradation should be addressed for methanol-fueled engines. In this study, the methanol addition effects on tribological characteristic degradation is experimentally assessed using a pin-on-disk tribo-tester. Ni-based alloy is used as a target material due to its broad applicability as an engine component material. For a lubricant, engine oil with and without methanol are used. The tests are conducted for up to 10,000 cycles under boundary lubrication while the change in friction force is monitored. Additionally, the wear rate is determined based on laser scanning confocal microscope data. An additional test in which methanol is added at regular intervals is performed with an aim to directly observe its effect on friction. Overall, the friction coefficient increases slightly with increasing methanol concentration. Furthermore, the wear rate of the pin and disk increase significantly with methanol addition. The results also indicate that the friction increases instantaneously with methanol addition at the contacting interface. These findings may be useful for better understanding the methanol effect on the tribological characteristics of Ni-based alloys for methanol-fueled engines with improved performance.

• Journal of Industrial Convergence
• /
• v.21 no.11
• /
• pp.29-41
• /
• 2023

In this study, assuming that the maritime manned-unmanned systems, which will be used as the main force of the ROK Navy in the future, conducts its sea line of communication(SLOC) protection operations, the combat effectiveness against major threats was measured, and through this, the development direction of the manned-unmanned systems was suggested. Multi-criteria decision-making techniques such as Delphi and AHP were used to measure combat effectiveness, and the AHP survey was conducted on 40 naval officers, including 25 senior officers who are well-understood in the combat effectiveness of the weapons system and MUM-T. As an evaluation index for measuring combat effectiveness, the OODA loop was set as the main attribute, followed by Observe(0.358), Orient(0.315), Act(0.217), and Decide(0.110). The combat effectiveness of each major threat in SLOC, the lowest alternative, was measured to be 1.68 times higher than the response to maritime conflicts in neighboring countries and 3.61 times higher than the response to transnational threats. These results are expected to support rational decision-making in determining the level of technology required for acquisition of marine manned-unmanned systems and establishing operational plans for naval forces.

• Korean Journal of Construction Engineering and Management
• /
• v.25 no.4
• /
• pp.34-44
• /
• 2024

In defense and military facility projects, adjustments to contract amounts due to design changes directly or indirectly affect factors such as increased construction costs and extended construction periods. Moreover, they can lead to differences of opinion and conflicts between the military and contracting parties. This case study analyzed the integrated management of defense and military facility projects by the Gyeonggi Southern Facilities Division, which oversees projects in Seoul and the southern Gyeonggi Province region for the Army, Navy, Marine Corps, and Air Force. Out of 388 completed projects, 103 cases with design changes were selected for analysis, aiming to ensure the reliability of data regarding the proportion of design changes in project completion. The study classified samples by the causes of design changes specified in the Ministry of Planning and Finance's contract regulations, assigning rankings based on the occurrence rates of each cause. Furthermore, it analyzed detailed factors for each cause of design change and derived implications to propose improvement measures. Considering the limited access to military primary data, this case study is expected to contribute to minimizing design changes in defense and military facility projects. Additionally, it is anticipated to be practically useful for subsequent research on contract amount adjustments resulting from design changes.

• The Korean Journal of Petroleum Geology
• /
• v.5 no.1_2 s.6
• /
• pp.1-8
• /
• 1997

Seismic stratigraphic analysis of the high resolution profiles obtained from the southeastern shelf of Korea divided the deposits into 4 sequences; 1) sequence D, 2) sequence C, 3) sequence B and 4) sequence A (Holocene sediments). Sequence D was deposited in shallow-water environment at west of the Yangsan Fault as the basin subsided. On the other hand, the eastern part was formed at the slope front. Landward part of the slope-front fill sediments were eroded and redeposited nearby slope due to the syndepositional tilting of the basin. This tilting probably resulted from the continuous closing of the Ulleung Basin. Sequence C is made of stacked successions of the lowstand fluvial sediments, transgressive sediments and marine highstand sediments derived from the paleo-river in the western part of the Yangsan Fault. Sequence C in the eastern part of the Yanshan Fault was formed at the shelf break. Progradation of the lowstand sediments resulted in broadening of the shelf. Sequence C in the eastern part was also tilted but the tilting was weaker than in Sequence D. During the formation of sequence B the tilting stopped and the point source instead of the line source started in both sides of the Yangsan Fault. Sequence B was composed of the highstand systems tract partially preserved around the Yokji island, lowstand systems tract mainly preserved in the Korea Trough and transgressive systems tract. After the stop of the tilting, the force of compression due to the closing of the Ulleung Basin may be released by the strike-slip faults instead of tilting.