• Journal of Environmental Science International
• /
• v.20 no.9
• /
• pp.1095-1104
• /
• 2011

A survey of professionals employed in marine related fields was conducted on subjects related to marine meteorological forecasts and special reports. The outcome of the survey indicated that the respondents were overall satisfied with the determination of the zones related to marine meteorological forecasts and special reports and with the number of forecast factors, but in regards to the questions about specific adjustment methods, it was found that the respondents perceived a need for adjustment. In addition, although there was a high consensus among the respondents that the criteria for watch and warning in the marine special reports were suitable, they voiced the opinion that it will be necessary to implement changes in the current criteria for watch and warning in order to further improve the compatibility of the criteria. The survey found that there was a high level of utilization for the marine meteorological information provided by the Korea Meteorological Administration(KMA), and that respondents mostly acquired this information via internet and TV. On the other hand, however, the satisfaction level regarding the accuracy of the marine meteorological information was low in comparison to the utilization level. The survey regarding areas for improvement in the forecasts and special reports also indicated that the need for 'improvement in the accuracy of forecasts' was cited most frequently.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4077-4082
• /
• 2023

Large areas must be rapidly screened to monitor radiation in marine environments. For this purpose, this study developed a mobile real-time gamma-ray measurement system for shipboard use and evaluated its performance. The system was developed to measure engine or generator cooling water by installing a canister inside the ship. The minimum detectable activity of the system is about 0.8 Bq/L for a 60 s measurement period, and real-time data transmission and remote control are possible. The system was tested in the field and is currently being installed and operated on ships in service. Such a ship-based real-time gamma-radiation measurement system is suitable for a wide range of marine radiation surveillance applications and is expected to be rapidly deployed.

• Journal of Environmental Science International
• /
• v.30 no.3
• /
• pp.195-206
• /
• 2021

Contaminated marine sediment is a secondary pollution source in the coastal areas, which can result in increased nutrients concentrations in the overlying water. We analyzed the nutrients release characteristics into overlying water from sediments and the interaction among benthic circulation of nitrogen, phosphorus, iron, and sulfur were investigated in a preset sediment/water column. Profiles of pH, ORP, sulfur, iron, nitrogen, phosphorus pools were determined in the sediment and three different layers of overlying water. Variety types of sulfur in the sediments plays a significant role on nutrients transfer into overlying water. Dissimilatory nitrate reduction and various sulfur species interaction are predominantly embodied by the enhancing effects of sulfide on nitrogen reduction. Contaminant sediment take on high organic matter, which is decomposed by bacteria, as a result promote bacterial sulfate reduction and generate sulfide in the sediment. The sulfur and iron interactions had also influence on phosphorus cycling and released from sediment into overlying water may ensue over the dissolution of ferric iron intercede by iron-reducing bacteria. The nutrients release rate was calculated followed by release rate equation. The results showed that the sediments released large-scale quantity of ammonium nitrogen and phosphate, which are main inner source of overlying water pollution. A mechanical migration of key nutrients such as ammonia and inorganic phosphate was depicted numerically with Fick's diffusion law, which showed a fair agreement to most of the experimental data.

• Korean Journal of Remote Sensing
• /
• v.37 no.4
• /
• pp.665-685
• /
• 2021

This study focused on the a 20-year evaluation of the dynamism of critical thermal anomalies in Busan metropolitan area prompted by unusual infrastructural development and demographic growth rate. Archived Landsat thermal data derived-LST was the major input for UTFVI and hot spot analysis (Getis-Ord Gi^*). Results revealed that the surface urban heat island-affected area has gradually expanded overtime from 23.32% to 32.36%; while the critical positive thermal anomalies (level-3 hotspots) have also spatially increased from 19.88% in 2000 to 23.56% in 2020, recording a net LST difference of > 5℃ between the maximum level-3 hotspot and minimum level-3 coldspot each year. It is been observed that thermal conditions of Busan have gradually deteriorated with time, which is potentially inherent in the rate of urban expansion. Thus, this work serves as an eye-opener to powers that be, to think and act constructively towards a sustainable thermal conform for city dwellers.

• Geomechanics and Engineering
• /
• v.21 no.5
• /
• pp.433-445
• /
• 2020

The weakening and softening behavior of soft clay subjected to cyclic loading due to the build-up of excess pore water pressure is well-known. During the design stage of the foundation of highways and coastal high-rise buildings, it is important to study the mechanical behavior of marine soils under cyclic loading as they undergo greater settlement during cyclic loading than under static loading. Therefore, this research evaluates the cyclic stress-strain and shear strength of untreated and treated marine clay under the effects of wind, earthquake, and traffic loadings. A series of laboratory stress-controlled cyclic triaxial tests have been conducted on both untreated and treated marine clay using different effective confining pressures and a frequency of 0.5 and 1.0 Hz. In addition, treated samples were cured for 28 and 90 days and tested under a frequency of 2.0 Hz. The results revealed significant differences in the performance of treated marine clay samples than that of untreated samples under cyclic loading. The treated marine clay samples were able to stand up to 2000 loading cycles before failure, while untreated marine clay samples could not stand few loading cycles. The untreated marine clay displayed a higher permanent axial strain rate under cyclic loading than the treated clay due to the existence of new cementing compounds after the treatment with recycled tiles and low amount (2%) of cement. The effect of the effective confining pressure was found to be significant on untreated marine clay while its effect was not crucial for the treated samples cured for 90 days. Treated samples cured for 90 days performed better under cyclic loading than the ones cured for 28 days and this is due to the higher amount of cementitious compounds formed with time. The highest deformation was found at 0.5 Hz, which cannot be considered as a critical frequency since smaller frequencies were not used. Therefore, it is recommended to consider testing the treated marine clay using smaller frequencies than 0.5 Hz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.761-764
• /
• 2001

A conceptual design of marine environmental information system(MEIS) for vessels running in the ocean was carried out. MEIS consists of a remote acquisition system of raw environmental data, a physical and numerical processing system of acquired raw data, and a supporting satellite communication system for data transfer. The efficiency of a remote acquisition system depends on the amount of acquired data and its real-time accessibility, while the efficiency of a data processing system is governed by the flexibility and accuracy of data analysis tools.

• Fisheries and Aquatic Sciences
• /
• v.25 no.5
• /
• pp.264-275
• /
• 2022

A non-destructive environmental DNA protocol for the genetic analysis of sea cucumber (Apostichopus japonicus) resources DNA was established. Among the several commercial DNA extraction kits, the DNeasy^® Plant Mini Kit was selected as the best choice to obtain the high-quality genomic DNAs from the mucous sea cucumber. As the temperature and incubation time increased, the amount of extracted environmental DNA was also large, but it was judged that the increased amount did not affect as much as 2-3 times. Therefore, these conditions were not considered to be the main factors to consider in actual environmental DNA extraction. However, the amount of seawater relative to the size of the sample was judged as a major consideration, and a sufficient amount of environmental DNA for analysis was secured when stored within 1 min while stirring the volume of seawater corresponding to the total sea cucumber weight (g). In securing the environmental DNA of sea cucumbers, the mortality rate of sea cucumbers in all experiments was 0, and it was judged that the effects of sea cucumbers were not significant through this treatment. Through the results of this study, sea cucumber DNA research, which has been conducted in a destructive method, can be conducted non-destructively through environmental DNA analysis. Through this study, we have secured a standard protocol that can successfully extract the sea cucumber DNA through environmental DNA. It is not only excellent in terms of time and cost of traditional DNA analysis method currently used, but it is completely non-destructive in the ecosystem of the survey area. It is believed that the system can be transformed in a way that does not affect it. However, it is thought that various standard protocols should be established considering the characteristics of each type.

• Korean Journal of Remote Sensing
• /
• v.38 no.5_3
• /
• pp.835-850
• /
• 2022

Microplastics have arisen as a worldwide environmental concern, becoming ubiquitous in all marine compartments, and various researches on monitoring marine microplastics are being actively conducted worldwide. Recently, application of a remote detection technology that enables large-scale real-time observation to marine plastic monitoring has been conducted overseas. However, in South Korea, there is little information linking remote detection to marine microplastics and some field studies have demonstrated remote detection of medium- and large-sized marine plastics. This study introduces research cases with remote detection of marine plastics in South Korea and overseas, investigates potential feasibility of using the remote detection technology to marine microplastic monitoring, and suggests some future works to monitor marine microplastics with the remote detection.

• Environmental Engineering Research
• /
• v.19 no.1
• /
• pp.101-105
• /
• 2014

Three magnesium compounds, $MgO_2$, MgO, and $Mg(OH)_2$, which are supposed to supply oxygen continuously, were applied onto contaminated bay sediment and its ecology in order to activate the local microbial flora. Those compounds were found to reduce chemical oxygen demand (COD), total nitrogen (T-N), and total phosphorus (T-P). Magnesium oxide, in particular, reduced COD by 30% and T-N and T-P considerably. All compounds also suppressed the release of pollutants in the order $MgO_2$, MgO, and $Mg(OH)_2$. Analysis of microbial flora showed that the microbial group treated by $MgO_2$ and $Mg(OH)_2$ was predictably stable; meanwhile, that treated by MgO increased the number of species, but decreased the total number of microorganisms.

• Journal of Navigation and Port Research
• /
• v.36 no.6
• /
• pp.513-519
• /
• 2012

Understanding the behavior of pollutants in the marine environment is essential for coping with the marine pollution problems such as eutrophication. In this study, the effects of environmental parameters on phosphorus release from marine sediment to sea water were investigated. The environmental parameters such as pH in the range of 7 to 9, temperature from 10 to 20C and dissolved oxygen levels (DO) renging 0.7 to 7.0mg/L were examined. Phosphorus release data were taken from batch tests excluding biotic effects, and analyzed using a first-order kinetic model. The effects of environmental parameters were quantified using a statistical methodology. High pH, high temperature, and low DO increased phosphorus release from the sediment to sea water. pH from 7 to 9, temperature from 10 to $20^{\circ}C$, or DO from 7.0 to 0.7 mg/L magnified the equilibrium phosphorus concentration up to 2~3 times.