• Journal of Conservation Science
• /
• v.34 no.1
• /
• pp.59-67
• /
• 2018

This study investigated manufacturing technique and provenance of the Gilt-bronze Seated Bhaisajyaguru (Medicine Buddha) Statue of Janggoksa Temple. The statue had the following : Cu(68.8%)-Sn(10.4%)-Pb(17.1%), it is similar to other medium or large Buddha statue. As results of comparison lead isotope ratio of sample with the provenance data were plotted in zone 3 of the South Korean galena map. According to this result of Bronze Buddha could be made into galena of the located in same area the temple. The results of this study were compared with the Bronze Bodhisattva statue of Goseongsa Temple. The manufacturing techniques were different based on the characteristics of Buddha statues and thus could be made into galena of the located in same area the temple.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.226-233
• /
• 2016

Purpose: The purpose of this study was to evaluate the adaptation of lithium disilicate crowns fabricated by CAD-CAM (computer aided design-computer aided manufacturing) and heat-press technique to compare two different measurement methods in assessing fit of the ceramic crowns: micro CT and cross-section technique. Materials and methods: A prepared typodont mandibular molar for ceramic crown was duplicated and ten dies were produced by milling the PMMA (polymethylmethacrylate) resin. Ten vinyl polysiloxane impressions were made and stone casts were produced. Five dies were used for IPS e.max Press crowns with heat-press technique. The other five dies were used for IPS e.max CAD crowns with CAD-CAM technique. Ten lithium disilicate crowns were cemented on the resin dies using zinc phosphate cement with finger pressure. The marginal and internal fits in central buccolingual plane were evaluated using a micro CT. Then the specimens were embedded and cross-sectioned and the marginal and internal fits were measured using scanning electronic microscope. The two measurement methods and two manufacturing methods were compared using Mann-Whitney U test (SPSS 22.0). Results: The marginal and internal fit values using micro CT and cross-section technique were similar, showing no significant differences. There were no significant differences in adaptation between lithium disilicate crowns fabricated with CAD-CAM and heat-press technique. Conclusion: Both micro CT and cross-section technique were acceptable methods in the evaluation of marginal and internal fit of lithium disilicate crown. There was no difference in adaptation between lithium disilicate crowns fabricated with CAD-CAM and heat-press technique except occlusal fit.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1836-1839
• /
• 1997

This paper presents machine vision technique with a camera modeling that accounts for major sources of camera distortion, namely, radial, decentering, and thin prism distortion. Radial distortion causes an inward or outward displacement of a given image point from its ideal location. Actual optical systems are subject to various degrees of decentering, that is, the optical centers of lens elements are not strictly collinear. It is our purpose to develop the vision system for the pattern recognition and the automatic test of parts and to apply the line of manufacturing.

• Proceedings of the KWS Conference
• /
• 1995.10a
• /
• pp.101-104
• /
• 1995

This paper deals with the development of fundamental design and manufacturing technique of hydraulic valve spool by optimizing of friction welding, the development of in-process real-time weld quality evaluation technique by acoustic emission and the evaluation of the mechanical properties and the fatigue life about the bar-to-bar dissimilar friction welded hydraulic valve spool steels.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.40-52
• /
• 1998

Among the non-traditional machining methods, Abrasive waterjet machining process shows big promise in drilling difficult-to-machine materials due to its numerous advantages such as absence of heat affect zone and thermal distortion. Acoustic emission signal technique is used to understand about material removal mechanisms during abrasive waterjet drilling process. More information about the drilling process is derived through frequency decomposition of auto regressive moving average modeling representing acoustic emission signals.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.216-220
• /
• 1999

In this paper, the feedback linearization technique is used with the sliding mode control for nonlinear system. The combination of these two control techniques can be achieved by proposing a novel sliding surface which has the nonminal dynamics of the original system controlled by feedback linearization technique. The noble design of the sliding surface is based on the augmented system whose dynamics have a higher order than that of the original system. The reaching phase is removed by using an initial virtual state which makes the initial sliding function equal to zero

• Journal of the Korea Safety Management & Science
• /
• v.2 no.3
• /
• pp.1-11
• /
• 2000

Avoiding the industrial accidents is one of the goals in manufacturing industries from the top manager to the foremen. Therefore all the companies try to prevent occupational accidents using system safety programs in order to increase the productivity. Korean industries have been tended to depend upon historical information to control risks. The other hand, foreign industries have identified risk factors using system safety techniques to predict future risks. This study presents the method to apply the foreign industries risk control technique to the Korean industries.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.293-302
• /
• 1999

This paper presents an efficient reengineering technique for the logistics process innovation which is the foundation of supply-chain management. Based on consulting experience on the domestic manufacturing firms, this paper provides promotion step for logistics innovation and six reengineering points including check system for customer's credit limit, check system of real-time inventory information, automatic system for sequential production plan, automatic order-release system, automatic packing system, and happy-call system for order-forward information. For each reengineering point, application cases in domestic industry are also presented.

• Elastomers and Composites
• /
• v.55 no.2
• /
• pp.128-136
• /
• 2020

The hydrolysis mechanisms as well as the hydrolysis measurement technique and its practical applications in material manufacturing fields are revised. This chapter, Part 1, elaborates the theoretical aspects of the hydrolysis mechanism. Acid-catalyzed and base-catalyzed hydrolysis mechanisms are reviewed. The quantitative analysis method based on the SIM technique using py-GC-MS is reviewed. Examples of hydrolysis of alkoxysilane in elastomer composites currently used in the industry and hydrolysis of amine in plastic composites are shown. Moreover, Part 2 discusses the mechanical property changes in elastomer and plastic composites after hydrolysis.

• Laser Solutions
• /
• v.3 no.1
• /
• pp.2-11
• /
• 2000

Laser cleaning has begun to attract a considerable amount of interest recently as a new cleaning technique among scientists and engineers. The unique characteristics of laser cleaning are currently finding successful applications in industry, in medicine as well as in the world of art conservation. This paper takes an overview of the laser cleaning technique itself including basic principles and characteristics, and provides an account of current trends especially with regard to practical applications. Experience with its successful applications in various fields shows that laser cleaning may be about to emerge as a real alternative to conventional cleaning methods.