• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.3-8
• /
• 2006

The application of three-dimensional (3-D) CAD has been popularized for design and production and digital manufacturing has been spreading in many industrial fields. By simulation of the production process using 3-D digital models, which are the core of CIM (Computer Integrated Manufacturing) system, the efficiency and safety of production are improved at each stage of work, and optimization of manufacturing can be achieved. This paper firstly describes the concept of "simulation based production" in shipbuilding and also digital manufacturing; the 3-D CAD system is indispensable for effective simulation because ship structure is three dimensionally complex. By simulation, "computer optimized manufacturing" can be possible. The most effective fields of simulation in shipbuilding are in jobs where many parties have to cooperate, while existing two-dimensional drawings are hardly observed the whole structures due to interference between structures or equipment of complex shape. In this paper some examples of the successful application in IHIMU (IHI Marine United Inc.) are shown: assembly of a pipe unit, erection of a complex hull block, carriage of equipment, installation of a propeller, and access in an engine room.

• 한국산업융합학회 논문집
• /
• 제7권2호
• /
• pp.193-198
• /
• 2004

This is the dissertation of the study of design characteristics about the practical flexible manufacturing system (PFMS). The basic ideas to analyze the manufacturing system which is the automatically operated is dependant on the various manufacturing procedures in factory. PFMS is the very useful equipment for students and trainee of production lines. This system is composed of hardware and software sub systems i.e. control and test unit and personal computer with software. The PFMS can be developed with design concepts and approved the capability of first article with functional tests. The PFMS module will be very useful for the manufacturing drill system in universities and practical fields. The flexible manufacturing systems have various subsystems appropriated for the final manufacturing products. Therefore the systems have the various kinds of hard wares as well as softwares. We study the software for the practical flexible manufacturing system designed in the Halla University and specially the design concept and using specification of the SCARA (Selective Compliance Assembly Robot Arm) robot which is used for the movement of the product is analyzed and introduced in this dissertation.

• 디지털융복합연구
• /
• 제10권2호
• /
• pp.231-235
• /
• 2012

생산정보시스템(Manufacturing Information System)은 생산기능을 구성하는 생산기획, 작업관리, 공정의 운영과 통제 그리고 생산실적관리 등과 관련된 활동을 지원하는 정보시스템이라 할 수 있다. 최근 생산 현장은 생산 고도화를 위하여 디지털 정보화 및 통합화에 대한 새로운 변화를 맞고 있다. 따라서 본 논문에서는 현재 생산정보화 시스템의 이슈들을 알아보고, 새로운 변화에 적응하기 위한 주요한 이슈 및 요소들을 제시한다. 마지막으로 이러한 요소들을 기반으로 하여 제조생산 정보화시스템 구축을 위한 비즈니스 인텔리전스 시스템을 제안한다.

• 식품과학과 산업
• /
• 제49권4호
• /
• pp.19-30
• /
• 2016

Food industry in Korea is one of the most important manufacturing field since the history of this country. Recent days all industries in the world move to $4^{th}$ industrial revolution beginning from 1st revolution. This means that connections between human to human, human to things and things to things should be settled down. food industry in this country should escape from the conventional manufacturing fields until now and accept new or cutting edge technology NT including artificial intelligence robot system and platform system using Internet of Thing. To overcome the saturation condition of domestic food market, it should be extended our market to overseas. To do this Korean food industry should be reformed the processing system to convergence and fusion inner or multi-disciplinary research in not only research field but also manufacturing field. The food industry must introduce new technology and concept of controlling all manufacturing systems. This paper present the fields should be convergence and the field study together and the new techniques, methods and new products be developed in the future.

• 한국건축시공학회지
• /
• 제8권2호
• /
• pp.71-79
• /
• 2008

The rebar work is very related to the safety and durability of the building. Recently, the rebar work is produced some serious problems due to the lack of skillful crafts-man and the rising cost of rebar materials. Many papers have dealt with the rebar work of the manufacturing system in plants with a view to improvement those problems. But, the research on the rebar work of the manufacturing system in field is in a insignificant condition. This study presents the following improvement schemes as a result. First, the education strengthening for evaluation on practical affairs, second, the reinforcement of drawing & management in shop drawing and finally the simplification of apartment rebar work in slab. Also, this paper aims at advancing apartment rebar work by the actual condition survey in slab work. The further research will be needed about the whole structure parts such as foundation, wall, girder and rebar truss-deck plate as one of the improvement methods.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.111-116
• /
• 2018

Recently, shape manufacturing method has been changed to a 3D printer. Since lamination type manufacturing method is the basis for forming a three-dimensional shape by repeated lamination, the horizontal accuracy of the lamination layer is very important. In the current paper, we have proposed a new leveling system to be installed in a large 3D printer. The light source was reflected from the water surface contained in the measuring device, and the inclination of the measuring device was measured from the light that entered into four regions of a quarter photodetector. The electrical signals generated differently according to the position of the beam spot incident on the quarter photodetector was acquired and compensated to be horizontal by using a motor mounted at the corner. Compared to a digital leveler, the newly developed leveling system gave errors of only 2 to 3%. This new device can be applied to various fields including the 3D printer in future.

• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.285-295
• /
• 1999

Developing control functions that operate and cooperate each equipment in order to achieve a goal is one of the most important problems in the installation of automated manufacturing systems. This paper discusses the development of a control system for heterarchical architecture and a simulator to verify operations of the control system. The object-oriented paradigm that has excellent reusability, portability, and extensibility is currently being used in many application fields as a software development methodology. Especially, UML(Unified Modeling Language), the third generation object-oriented modeling methodology, has advantages such as model generalization, clearness, and so on. In this research, software objects to accomodate the real time environments of automated manufacturing systems are modeled with the diagrams of UML. Based on these models, control software is developed as a format of pseudo-codes. A simulator is implemented to validate the developed control system.

• 산업공학
• /
• 제21권4호
• /
• pp.435-443
• /
• 2008

RFID (Radio Frequence Identification) is emerging technology and it is used for many fields. The research about RFID has been focused on hardware such as increasing hitting ratio. But recently the research about how and where RFID can apply is going on. Especially people are doing research about connecting RFID with existing information system. In this paper, when BPM manage RFID based manufacturing operation process, we show components which is needed and how we can obtain the components. And we apply this to straw manufacturing process on experiment. The claim-handling process and order-handling process which need improvement in straw manufacturing are chosen and we improve those processes. For executing the improved process, we define components which are database, data acquisition workflow and real-time event processing system and then we make prototype system.

• 대한조선학회논문집
• /
• 제43권2호
• /
• pp.228-235
• /
• 2006

Nowadays, digital manufacturing has been known to be very effective method in manufacturing fields. It is aimed to estimate process time, to improve operation efficiency, and to prevent bottleneck processes in advance of real manufacturing. This paper addresses a scheduling support system for panel hues in a shipyard through digital manufacturing simulation. The proposed system supports operators to make better decisions on the shop-floor scheduling in panel lines. It ,would provide a complete schedule that is at least as good as any schedule currently obtained. Furthermore, it can evaluate the operator's schedule by simulating it with 3-dimensional models before the work orders and schedules are released.

• 한국기계가공학회지
• /
• 제11권2호
• /
• pp.1-6
• /
• 2012

Recent ultra-precision machining systems have nano-scale resolution, and can machine various shapes of complex structures using five-axis driven modules. These systems are also multi-functional, which can perform various processes such as planing, milling, turning et al. in one system. Micro machining technology using these systems is being developed for machining fine patterns, hybrid patterns and high aspect-ratio patterns on large-area molds with high productivity. These technology is and will be applied continuously to the fields of optics, display, energy, bio, communications and et al. Domestic and foreign trends of micro machining technologies for flat molds were investigated in this study. Especially, we focused on the types and the characteristics of ultra-precision machining systems and application fields of micro patterns machined by the machining system.