• 한국추진공학회지
• /
• 제11권4호
• /
• pp.38-45
• /
• 2007

국내 최초로 액체로켓엔진용 연료 과농 가스발생기가 개발되었으며 이것은 고온, 고압가스(약 900 K, 약 58 bar)를 초당 4 kg이상 발생시킬 수 있다. 고압가스는 터보펌프 터빈을 구동하며, 추진제 탱크에 필요한 열 공급원으로 사용될 수 있다. 본 가스발생기는 개념설계 및 초기 개발시험을 거쳐 최종 형상이 결정되었으며, 구조 및 열 해석이 동시에 진행되었다. 제작은 정밀 기계가공과 표면처리, 특수용접공정을 통해 이루어졌으며, 최종 개발 성능 및 기능 특성 확인을 위해 두 종류의 가스발생기가 제작되어 연소시험을 통한 평가가 진행되었다. 안정적인 점화 및 연소특성과 함께 발생 연소가스의 온도분포 및 평균온도 특성이 양호하며, 개발 요구 조건을 본 개발품이 만족하는 것으로 성공적인 개발이 이루어졌다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 추계 학술대회 논문집
• /
• pp.87-95
• /
• 2005

삼중수소를 사용하는 자발광유리관의 제조에 필요한 4가지 핵심 기술 중 레이저를 이용한 밀봉/절단기술을 개발하였다. 상용 제품을 분석한 결과 유리관의 재질은 pyrex 이었고 레이저는 유리가공에 적절한 펄스형 이산화탄소 레이저를 사용하였다 유리관의 밀봉/절단에 영향을 미치는 인자들로는 레이저빔의 강도 지속시간 조사 방법, 유리관 내부의 압력 등이었다. 전 공정은 2단계로 이루어져 1단계에서는 삼중수소를 주입하고 유리관의 양단을 밀봉하였으며 2단계에서는 삼중수소가 봉입된 유리관을 원하는 길이로 밀봉/절단하였다. 각 공정에서 유리관의 밀봉은 defocusing된 레이저빔을 사용하였으며 절단은 focusing된 빔을 사용하였다. 밀봉/절단 후에는 잔여 열응력에 의한 파열을 방지하기 위하여 열처리를 하였다.

• Journal of Microbiology and Biotechnology
• /
• 제28권11호
• /
• pp.1823-1833
• /
• 2018

Fluorescence in-situ hybridization (FISH) is a common and popular method used to investigate microbial communities in natural and engineered environments. In this study, two specific 16S rRNA-targeted oligonucleotide probes, CLZ and KCLZ, were designed and verified to quantify the genus Clostridium and the species Clostridium kluyveri. The optimal concentration of hybridization buffer solution for both probes was 30% (w/v). The specificity of the designed probes was high due to the use of pellets from pure reference strains. Feasibility was tested using samples of Chinese liquor from the famed Luzhou manufacturing cellar. The effectiveness of detecting target cells appears to vary widely in different environments. In pit mud, the detection effectiveness of the target cell by probes CLZ and KCLZ was 49.11% and 32.14%, respectively. Quantitative analysis by FISH technique of microbes in pit mud and fermented grains showed consistency with the results detected by qPCR and PCR-DGGE techniques, which showed that the probes CLZ and KCLZ were suitable to analyze the biomass of Clostridium spp. and C. kluyveri during liquor fermentation. Therefore, this study provides a method for quantitative analysis of Clostridium spp. and C. kluyveri and monitoring their community dynamics in microecosystems.

• 한국정보통신학회논문지
• /
• 제21권12호
• /
• pp.2341-2346
• /
• 2017

안와 내에서 안구의 상대적 위치는 여러 병적인 상태를 짐작할 수 있는 하나의 기준이 될 수 있다. 특히 안와골절, 갑상선 안질환, 안와 종양 등의 진단과 이에 약물 및 수술적 치료의 결과를 판단하는데 유용하다. 현재 안구 돌출 값을 측정하기 위해 주로 사용되는 대표적 측정 기기인 Hertel과 Naugle 안구돌출계 등은 검사자가 다를 경우, 같은 검사자가 반복적으로 측정하더라도 검사할 때마다 안와의 고정부위가 달라지는 등 측정자에 의한 오차가 필연적이다. 또한 동일한 안구 돌출 계라고 하더라도 제조 회사가 다르다면 안와의 고정부위 디자인이 달라 검사자에의한 측정 오차가 발생한다. 본 논문에서는 안구돌출값의 측정을 3차원 영상 측정기술인 백색광 간섭계를 이용하여 검사 정밀도 및 반복 정도를 크게 올릴 수 있는 자동 측정 방법에 대한 연구를 제안하고자 한다.

• 자원리싸이클링
• /
• 제24권3호
• /
• pp.34-43
• /
• 2015

철강 산업에서의 원재료는 생산성, 품질, 가격경쟁력에 결정적인 역할을 하고 있다. 철강제품의 원재료를 함철부산물로 활용한다면, 함철부산물을 처리하기 위한 비용 및 환경오염문제를 해결할 뿐만 아니라 가격경쟁력을 높일 수 있다. 함철부산물들은 대부분 작읍입도를 가지고 있어서, 제강공정 내에 직접 투입하게 되면 열 유동 및 원료 비산 등의 문제가 발생하게 된다. 이러한 문제점을 해결하고 추가적인 환원을 유도하기 위해 철원에 탄재를 혼합한 뒤 단괴를 성형하여 제강공정 내에 투입하는 방법이 연구되고 있다. 본 연구에서는 함철부산물에 탄재를 혼합하여 단괴를 성형하는 방법에 대해 연구하였다. 함철부산물, 탄재, 융제, 바인더에 따른 CCBI (carbon composite briquette iron)의 성형성 및 압축강도를 확인하였다.

• 소성∙가공
• /
• 제15권6호
• /
• pp.445-452
• /
• 2006

In most of automobile body panel manufacturing, trimming process is generally performed before flanging. To find feasible trimming line is crucial in obtaining accurate edge profile after flanging. Section-based method develops blank along manually chosen section planes and find trimming line by generating loop of end points. This method suffers from inaccurate results of edge profile. On the other hand, simulation-based method can produce more accurate trimming line by iterative strategy. In this study, new fast simulation-based method to find feasible trimming line is proposed. Finite element inverse method is used to analyze the flanging process because final shape after flanging can be explicitly defined and most of strain paths are simple in flanging. In utilizing finite element inverse method, the main obstacle is the initial guess generation for general mesh. Robust initial guess generation method is developed to handle genera] mesh with very different size and undercut. The new method develops final triangular mesh incrementally onto the drawing tool surface. Also in order to remedy mesh distortion during development, energy minimization technique is utilized. Trimming line is extracted from the outer boundary after finite element inverse method simulation. This method has many advantages since trimming line can be obtained in the early design stage. The developed method is verified by shrink/stretch flange forming and successfully applied to the complex industrial applications such as door outer flanging process.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.957-962
• /
• 2005

Today, the elderly is increasing gradually in the Republic of Korea society and this problem will be more serious in the near future. Therefore, engineering support for aged people is required. We are establishing a new field of healthcare engineering for elderly people and aiming to support for aged people and disabled people using adaptive control and instrument technology. In this paper, the goal is to implement the shared control of a robot mobility aid for the elderly. As using this type of assistive technology to be useful by its intended user community, it supports elderly people and handicapped people to live independently in their private homes. The interface transforms the force applied by the user into the robot's motion. Devices like buttons, joysticks, and levers already exist for relaying user input; however, they require hand displacement that would loosen or otherwise release the user's hold. Such interfaces make operation very difficult and potentially unsafe. Therefore, we propose a shared control system. It's safe more than joysticks and buttons. The shared control is a means of registering the user's intention through physical interaction. It's an important component in the development of robotic elderly assistant. The concept of shared control describes a system which is two or more independent control systems. We are using that the three component blocks consist of pressure sensor (flexible force sensor), circuit of measurement and transfer function. Experimental trials of this paper have been tested at the indoor environment. The robot is able to know the user intended direction through haptic device were logged along with the robot's force sensor.

• 대한치과교정학회지
• /
• 제47권2호
• /
• pp.130-141
• /
• 2017

The aim of this case report was to describe an innovative orthodontic treatment method that combined surgical and orthodontic techniques. The novel method was used to achieve a positive result in a case of moderate crowding by employing a computer-guided piezocision procedure followed by the use of clear aligners. A 23-year-old woman had a malocclusion with moderate crowding. Her periodontal indices, oral health-related quality of life (OHRQoL), and treatment time were evaluated. The treatment included interproximal corticotomy cuts extending through the entire thickness of the cortical layer, without a full-thickness flap reflection. This was achieved with a three-dimensionally printed surgical guide using computer-aided design and computer-aided manufacturing. Orthodontic force was applied to the teeth immediately after surgery by using clear appliances for better control of tooth movement. The total treatment time was 8 months. The periodontal indices improved after crowding correction, but the oral health impact profile showed a slight deterioration of OHRQoL during the 3 days following surgery. At the 2-year retention follow-up, the stability of treatment was excellent. The reduction in surgical time and patient discomfort, increased periodontal safety and patient acceptability, and accurate control of orthodontic movement without the risk of losing anchorage may encourage the use of this combined technique in appropriate cases.

• 한국의상디자인학회지
• /
• 제13권3호
• /
• pp.89-103
• /
• 2011

The purpose of this study is to analyze the formative characteristics of accordion pleats shown in 10/11 S/S London, Paris, New York collection and evaluate the differences of visual image by variations in the width of pleats and the length of the accordion pleats skirt. The stimuli are 21 samples: 7 variations of the width of pleats and 3 variations of the length of skirt. The data has been obtained from 43 fashion design majors. The data has been analyzed by Factor Analysis, Anova, Scheffe's Test. The results of the study are as follows: Accordion pleats was first introduced by Marriano Fortuny. He published delphos dress by creating silk pleats manufacturing technique and it was recognized as the best pleats work. Since then, pleats with synthetic fiber characteristics were used by many fashion designers. Accordion pleats were used in various items including one-peice, skirt and pants in collection of 2010 and 2011. The design of accordion pleats skirt used different width of pleats, length of the skirt and materials. The visual image by the width of pleats and the length of skirt are composed of 3 factors : dearness, attractiveness and elegance. In these factors, dearness factor is estimated by the most important factor. The accordion p1eats skirt is most attractive and dear when the width of pleats is the shortest, 1/8", and the width of 4/8" and 5/8" follows. The accordion pleats skirt is most attractive and dear when the length of skirt is similar to that of mini-skirt, and the skirt was estimated to be elegant as the skirt gets longer. When the length of skirt is in between, the skirts were estimated to be ambiguous in all visual images. The interaction effect of visual image according to the changes in width of pleats and skirt length of accordion pleats skirt was seemed to have significant differences by factors, and the main effect had great differences in all factors.

• 한국해양공학회지
• /
• 제22권4호
• /
• pp.8-13
• /
• 2008

In this study, an investigation of shear wave ultrasonic technique was carried out to detect stacking orientation error for CF/Epoxy quasi-isotropy composite laminates. The ultrasonic shear wave is particularly sensitive to ply orientation and layup sequence in tire CF/Epoxy composite laminates. In the manufacturing of composite laminates, it is important that layup errors be detected in samples. In this work, an effect was mack to develop shear wave techniques that can be applied to composite laminates. During testing, the mast significant problem is that the couplant conditions do not remain the same because of its changing viscosity. The design and use of a shear ware transducer would greatly alleviate the couplant problem. A pyramid of aluminum, with isosceles triangle (two 45o angles) sides, was made to generate shear waves, using two longitudinal transducers based on an ultrasonic-polarized mechanism. A signal splitter was connected to the pulser jack on a pulser/receiver and to the longitudinal transducers. The longitudinal transducers were mounted with mineral oil, and the shear transducer was mounted with burnt honey on the bottom as a receiver. The shear wave was generated at a maximum and a minimum based on the ultrasonic-polarized mechanism. Results show it is feasible to measure layup error using shear wave transducers on a stacking of prepregs in composites.