• Korean Journal of Heritage: History & Science
• /
• v.56 no.1
• /
• pp.100-116
• /
• 2023

The Sinamsa Temple was built in the late Goryeo Dynasty and a gilt-bronze seated Buddha is enshrined in Geungnakjeon hall in the precinct. Various damages occurred in the gilt layer of the Buddha, such as peeling of the gilt layer and deteriorating gloss. In the study, the conservation conditions of the inside and outside on the statue were accurately investigated, and the making technique was interpreted through the material characteristics and non-destructive diagnosis of the statue. As a result, it is estimated that gold-gilding layer is pure gold, coloration pigment of black is carbon, green is malachite, atacamite and verdigris, red is red lead and cinnabar, respectively. In the deterioration evaluation, peeling, cracking, break out and exfoliation of the gilt layer are confirmed as damages, but the conservation condition is relatively wholesome. However, the gloss of the gilt layer is calculated to be wider in the poorer part than the maintenance part. The ultrasonic velocity of the statue was calculated to be 1,230 to 3,987 (mean 2,608) m/s and showed a relatively wide range. In infrared thermography, peeling was not confirmed, and no special bonding marks were found. In endoscope, some biological damage and corrosion were observed on the surface of the internal metal, and sealed artifacts were identified. Manufacturing technique based on the study, it is considered that the gilt-bronze seated Buddha was cast at once, and the mold was inverted to inject molten metal.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.245-256
• /
• 2023

When restoring with a dental digital system for implant-supported prosthesis, a double digital scanning technique is required: an intraoral scan of the three-dimensional implant location and intraoral scan after placement of temporary denture or provisional prosthesis. During the intraoral scan, the use of scan body as a stable landmark can improve the accuracy of digital impression and simplify laboratory process. In this case, a full-digital system was used to plan and fabricate a custom abutment, provisional prosthesis, and definitive prosthesis. After implant placement, the scan area of the intraoral scan body connected with implant and the intraoral scan body marked on the inside of temporary denture were superimposed. Out of the superimposed files, a custom abutment and provisional prosthesis were fabricated which match the vertical dimension of temporary denture, and definitive prosthesis was fabricated based on provisional prosthesis. We report this case because result has been functionally and esthetically satisfactory by using vertical dimension and central relation set during the fabrication of temporary denture to the definitive prosthesis.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.160-164
• /
• 2007

In the steel industry, there is a need to produce large forged parts for the automobile industries, the flight and shipping industries ad military industries. In the steel-industry application, a cogging technique for cast ingots is required, because the major parts are needed as one large body in order to obtain higher quality. Therefore, cogging process is the primary step in manufacturing of practically large open-die forging. In the cogging process, internal voids have to be eliminated as defects, The present work is concerned with the elimination of the internal voids in large ingots so as obtain sound products. In this study, hot compression tests were carried out to obtain the flow stress of cast microstructure at different temperature and strain rates. The FEM analysis are performed to investigate the overlap defect of cast ingots during cogging stage. The measure flow stress data were used to simulate the cogging process of cast ingot using the practical material properties. Also the analysis of void closure are performed by using the $DEFORM^{TM}$-3D. The calculated results of void closure behavior are compared with the measured results before and after cogging, which are scanned by the X-ray scanner. From this result, the criteria for deformation amounts effect on the void closure can be investigated by the comparison of practical experiment and numerical analysis.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.6 s.73
• /
• pp.819-832
• /
• 2004

This study describes an efficient and facile method for configuration optimum design of structures. One of the ways to achieve numerical shape representation and the selection of design variables is using the design element concept. Using this technique, the number of design variables could be drastically reduced. Isoparametric mapping was utilized to automatically generate the finite element mesh during the optimization process, and this made it possible to easily calculate the derivatives of the coordinates of generated finite element nodes w.r.t. the design variables. For the structural analysis, finite element analysis was adopted in the optimization procedure, and two different techniques(the deterministic method, a modified method of feasible direction; and the stochastic method, a genetic algorithms) were applied to obtain the minimum volumes and section areas for an efficient configuration optimization procedure. Futhermore, spline interpolation was introduced to present a realistic optimum configuration that meet the manufacturing requirements. According to the results of several numerical examples(steel structures), the two techniques suggested in this study simplified the process of configuration optimum design of structures, and yielded improved objective function values with a robust convergence rate. This study's applicability and capability have therefore been demonstrated.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.1
• /
• pp.45-51
• /
• 2003

Stereo bird's-eyes-view was prepared for 3-dimensional view of various forms of Jecheon city, and 3-dimensional simulation was applied to it so as to show it in moving pictures in spatial. In manufacturing stereo bird's-eyes-view, perspective technology was used in image-making technology, and the basic material images are prepared as fellows: used EOC Images from Arirang-1 satellite, created DEM whose error was optionally geometric corrected after drawn from the contour line of the map on a scale of l/5,000 manufactured by national geography institute as a national standard map, and classified road lines which were manufactured as a road layer vector file of a map on a scale of l/l,000 and then overlay it over the three dimensional image of target area. Especially for the connectivity with address system to be used in new address, an arterial road map on a scale of l/l,000 that had been manufactured to grant new address was used in maximum in road network structure data of city area in this study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.471-477
• /
• 2012

SCM420 steel tempered after performing gear hove PACVD carbide coating on the surface after the cutting surface hardness was high. Difficult-to-cut, without coating is classified as mild as large, including materials like mild, high strength that improves tool life and productivity have limited availability. Drive to improve it in the TiCN-coated carbide call for war to the finish coating on cutting a hob skiving good workability, tool wear less, 2.5-fold increase in tool life results were obtained. Experiments using CNC Skiving hobbing machine with wet cutting conditions, cutting speed and feed rate to apply a variety of the tool wear and surface roughness data were obtained. Results from condition 2 (V = 200m/min F = 0.7mm/rev) cutting speed feed mark the cutting surface microstructure and surface roughness Rmax $4.7{\mu}m$(Ra $1.19{\mu}m$) of the data was obtained.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.3
• /
• pp.319-324
• /
• 2012

The hot-stamping technique is a forming method for manufacturing high-strength parts, in which the part is cooled rapidly after press forming above the austenite transformation temperature. Boron steel, which contains a very small amount of boron, is one of the materials used for hot stamping. The purpose of this study is to investigate the microstructure and mechanical properties according to the heat-treatment conditions. Die-quenching from various temperatures was conducted for different elapsed heat-treatment times. Laser-welded boron steel after quenching has a tensile strength of 1454 MPa and an elongation of 6 %. It has 94 % of the tensile strength of the base metal (1522 MPa). These properties can provide practical information for the use of boron steels for hot stamping.

• Information Systems Review
• /
• v.15 no.2
• /
• pp.75-90
• /
• 2013

This research was undertaken to find out how effectively ERP has been employed by the enterprises through comparing and analyzing the management performance of each enterprise after introducing ERP to Retail and Distribution Industry using DEA technique. According to the research results, efficiency evaluation for each site was calculated through input and output factors to find out comparative ERP system usage efficiency of 10 Retail and Distribution Industry Companies in terms of such factors as employee, quick assets, inventories, sales revenue, operating income. This paper confirms that the companies having launched management innovation by aggressively adopting ERP saw their management efficiency improving consistently, and in the distribution industry, it took at least 3 years before the effect of ERP introduction on enhancing management efficiency became visible. Furthermore, this paper also reveals that, unlike the manufacturing industry which was the subject of the previous study, efficiency was not necessarily proportional to the size of company in the service industry including distribution and export which was the subject of this paper.

• Journal of International Society for Simulation Surgery
• /
• v.1 no.1
• /
• pp.13-15
• /
• 2014

Nowadays, with advanced 3D printing techniques, the custom-made implant can be manufactured for the patient. Especially in skull reconstruction, it is difficult to design the implant due to complicated geometry. In large defect, an autograft is inappropriate to cover the defect due to donor morbidity. We present the process of manufacturing the 3D custom-made implant for skull reconstruction. There was one patient with skull defect repaired using custom-made 3D titanium implant in the plastic and reconstructive surgery department. The patient had defect of the left parieto-temporal area after craniectomy due to traumatic subdural hematoma. Custom-made 3D titanium implants were manufactured by Medyssey Co., Ltd. using 3D CT data, Mimics software and an EBM (Electron Beam Melting) machine. The engineer and surgeon reviewed several different designs and simulated a mock surgery on 3D skull model. During the operation, the custom-made implant was fit to the defect properly without dead space. The operative site healed without any specific complications. In skull reconstruction, autograft has been the treatment of choice. However, it is not always available and depends on the size of defect and donor morbidity. As 3D printing technique has been advanced, it is useful to manufacture custom-made implant for skull reconstruction.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.291-297
• /
• 2016

Patients with $Sj{\ddot{o}}gren^{\prime}s$ syndrome usually suffer from teeth discoloration and attrition due to xerostomia. If the anterior teeth are badly worn, problems such as loss of anterior guidance, occlusal disharmony, and limited space for restoration may occur. However, ideal occlusion is obtained in both centric and eccentric relation by regaining the disocclusion of the posterior teeth through the anterior and lateral guidance using twin-stage method. In this case, rehabilitation was performed for a $Sj{\ddot{o}}gren^{\prime}s$ syndrome patient with maxillary and mandibular incisor's severe attrition and teeth discoloration by using twin-stage method.