• Journal of Climate Change Research
• /
• v.3 no.3
• /
• pp.195-209
• /
• 2012

There are four differentiated levels to quantify the amount of greenhouse gas emissions from a facility, which are Tier 1 to 4 based on the IPCC guidelines. In this study, the emission estimates from all tier levels were calculated to compare their total $CO_2$ emission results among themselves for seven facilities, including three sectors of electricity generation, municipal solid waste incineration, and cement manufacturing for three months between February and May 2011. Generally the measured $CO_2$ emissions by Tier 4 were higher than the calculated $CO_2$ emissions by Tier 3, which had been also observed for the power plants in the USA. It was found out that to obtain more reliable estimation for Tier 3, accurate analysis of the composition of the fuel used should be carried out. It was suggested that further refinement on the administrative guidelines be made to make it more robust.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.4
• /
• pp.1366-1385
• /
• 2018

Recently, government policy focuses on R&D subsidies for venture firms in the early and medium stage. However, due to the 'asymmetric information' on those firms, a concern about the possibility of adverse selection of government policy, that is, whether the R&D subsidies are offered to the less-growth potential venture firms is on the rise. Therefore, based on the "2015 venture firm's survey" data in Korea, we compared the managerial efficiency of venture firms in manufacturing sectors by dividing them into beneficiary and non-beneficiary groups at government R&D subsidies. We found that the beneficiary groups showed lower managerial efficiency than non-beneficiary groups, even if they are superior to non-beneficiary groups in technological performance. We also observed that the phenomenon involve 'low managerial efficiency in the beneficiary groups' is more relevant in mid-high tech. manufacturing sectors. Our findings provide an exploratory empirical evidence of the concern about adverse selection in the selection of R&D subsidies beneficiary groups. Therefore, the government should consider managerial performance as the key criteria for selecting R&D subsidies beneficiary groups, rather than depending on technological performance solely. Furthermore, the government should develop other complementary policies to support financial performance of the groups. Lastly, the government should make those policies attract venture firms with potential to achieve financial performance.

• Korea Trade Review
• /
• v.43 no.4
• /
• pp.155-175
• /
• 2018

This study estimates the technical efficiency and total factor productivity(TFP) of and analyzes the relationship between TFP and exports for Korean manufacturing companies from 2000 to 2016. Specially, TFP is decomposed into Technical Change(TC), Technical Efficiency Change (TEC), and Sale Effect(SE), and compared between large and small enterprises. First, in the case of technical efficiency, the Korean economy has been very vulnerable to external shocks, such as the sharp decline following the 2008 financial crisis. The efficiency of the electronics, automobile, and machinery sectors is low and needs to be improved. In addition, the technological efficiency of large enterprises is higher than that of SMEs in most manufacturing sub-sectors except for non-ferrous metals. In the case of TFP, most changes are due to TC, and the effective combination of labor, capital and the effect of scale have little effect, suggesting that improvement of internal structure is urgent. In addition, volatility due to the impact of the financial crisis in 2008 was much larger in SMEs than in large companies, so external economic impacts are more greater for SMEs than large enterprises. The relationship between TFP decomposition factors and exports shows that TC has a positive effect only on exports of SMEs. Therefore, in order to increase exports, in the case of SMEs, R&D support to promote technological development is needed. In the case of large companies, it is necessary to establish differentiated strategies for each export market, competitor company, and item to link efficiency and scale effect of exports.

• Economic and Environmental Geology
• /
• v.54 no.5
• /
• pp.573-580
• /
• 2021

This study analyzed the induced effects of the aggregate and stone sectors using the industry association table. First, the added value of the aggregate and stone sectors was summarized, and then the intermediate input structure and induced effect were analyzed. In terms of value-added structure, aggregate and stone showed a higher employee remuneration rate compared to the manufacturing industry, and a higher rate of operating surplus compared to other mining industries. The intermediate input structure summarizes the sector using aggregate and stone products as intermediate inputs and their input ratio. The proportion of the intermediate element input structure was confirmed. In addition, the main input sectors of ready-mixed concrete, the largest consumer of aggregate and stone, are also summarized. The production-inducing effect of aggregate and stone showed a higher influence coefficient than the sensitivity coefficient, confirming that they had a relatively large rear chain effect. The production inducement effect was reviewed by reconstructing the industry association table, and it was found to show a relative superiority in the influence coefficient, similar to the results derived according to the provisional classification of the Bank of Korea.

• Journal of Cadastre & Land InformatiX
• /
• v.54 no.1
• /
• pp.33-48
• /
• 2024

This study aims to establish the scope and statistics of the K-address information industry in Korea, estimating its size and prospects and estimates the economic effects through K-address information industry based on Input-Output analysis. Considering the characteristics and sectoral structure of the K-address information industry, the study delineates the scope and specific sectors, constructing sectoral statistics linked to the KSIC and the Bank of Korea's industrial classification. The study estimates the sectoral industry size, taking into account potential markets. Furthermore, it analyzes the economic impact of each sector within the K-address information industry. To figure out the economic effects, the study conducts Input-Output analysis by setting the K-address information industry as an exogenous sector in the input-output table. The results indicate that the overall size of the K-address information industry is estimated to grow from 406.1 billion KRW in 2021 to 3.65 trillion KRW in 2030. The economic effects of the K-address information industry vary by sector, emphasizing the importance of synergies and integration with related sectors, particularly those with significant inducement effects in high value-added manufacturing and service sectors. Furthermore, the industry's sensitivity to economic fluctuations is evident through the input-output analysis of inter-industry chain effects.

• Korean Journal of Optics and Photonics
• /
• v.28 no.6
• /
• pp.356-360
• /
• 2017

Indium tin oxide (ITO) provides high electrical conductivity and transparency at visible and near-IR wavelengths. ITO is widely used as a transparent electrode for the fabrication of LCDs, OLEDs, and many kinds of optical applications. It is widely employed for electrodes in various electric and display sectors because of its transparency in the visible range and high conductivity. Therefore, one issue is removing a specific area of a layer of material such as ITO or metallic film on a substrate, without affecting the properties of the substrate. ITO-on-glass removal using a laser is friendlier to the environment than traditional methods. In this study, ablation of ITO film on glass using a femtosecond-laser micromachining system (wavelength 1026 nm, pulse duration 150 fs) and a nanosecond-laser micromachining system (wavelength 1027 nm, pulse duration 5 ns) are described, compared, and analyzed.

• Environmental and Resource Economics Review
• /
• v.16 no.3
• /
• pp.723-738
• /
• 2007

This paper draws some implications from Logarithmic Mean Weight Divisia Method (LMWDM) on the sources of $CO_2$ emission changes in the manufacturing sectors of Korea, UK, and USA. The sources of change in industrial $CO_2$ emission of a country, as manifested by production scale factor, structural factor, and technical factor, summarizes the forces behind the change in $CO_2$ emissions in each country's manufacturing sector. There are three observations. First one is that Korea's emission is increasing while USA and UK are experiencing reduction or stabilization of $CO_2$ emission in the manufacturing sector. Second implication is that the technical factor affecting $CO_2$ emission in Korea does not help much, or even hinder, the reduction of $CO_2$ emissions, comparing to USA and UK. Third one, which is the combined result of the first and the second one, is that Korea's increasing trend in aggregate $CO_2$ emission throughout the periods in consideration is mainly due to the failure in technical progress, or the deterioration in the structure of within subcategories, or both. The policy implications is clear. The obvious prescription is to launch a nation-wide policy drive which can revert these adverse trends.

• Journal of the Economic Geographical Society of Korea
• /
• v.26 no.1
• /
• pp.1-22
• /
• 2023

This study proposes an integrated use of region and industry as a way to classify firms' innovation activities by type. Existing studies have used the method of determining innovative activities according to the components of the technological regimes and aggregating them by industry classification, but this method cannot fully reflect the heterogeneity within industries in an increasingly sophisticated innovation environment. Therefore, this study divides firms by region and industry and conducts a cluster analysis on the proportion of innovative activities by the components of the technological regimes to derive a total of four innovation types. Using the 2016 Korean Innovation Survey to classify innovation types in the manufacturing industry, we found that innovation activities are concentrated in Seoul, Busan, Incheon, and Chungnam/ Sejong/ Daejeon area, with different deviations by region and industry. The results of the aggregation of industrial innovation activities, weighted by corporate activity by region, show that the level of innovation activity in some manufacturing industries, such as petrochemicals, manufacturing of medical, precision and optical instruments, watches and clocks, is high, but the level of innovation in other sectors within the manufacturing industry is generally low.

• Journal of Fashion Business
• /
• v.14 no.3
• /
• pp.128-145
• /
• 2010

Nowadays people are turning to have a more intimate environment-friendly lifestyles. In the clothing industry they are focusing on making products that are more human-friendly and not harmful to the environment. In the midst of the spread of consumption research is being done to develop manufacturing textiles that do not induce pollution. For instance, advantages of the natural textile fibers, cotton, silk, and ramie, have been newly recognized in terms of environment-friendliness, Together with these fibers, the natural high molecular materials, such as chitosan and hyaluronic acid, have found new roles in the application sectors of human-friendliness and environment-friendliness. Products using these substances and processing methods can make the products more wearable, have high sensitivity, make people feel aesthetic appreciation for the products, and make them appreciate the value of a more healthier environment. In a survey according to subjects in their 20s and 30s, their preferences towards their consciousness and awareness of the development of materials as well as their attitude towards environment-friendly products were determined as a conclusion. It was shown that consumers that are more conscious about the interest of the environment as well as the problems concerning the environment were more intent on buying products that were environmentally-friendly. Women have shown more active and positive attitudes towards the importance of the awareness of the environment in comparison with men. Generally, consumers in their 20s and 30s preferred the feel of materials that were less than 1% concentration process than those of materials that were 1% concentration process. To increase the "rustly" feeling of the materials, it was found that 1% concentration process was suitable for manufacturing.

• Journal of Technology Innovation
• /
• v.15 no.2
• /
• pp.25-40
• /
• 2007

It has been pointed out that the shortage of the Korean science and engineering workforce is a key issue in enterprises' competitiveness. The Korean government has conducted various surveys and research projects to determine the current situation and its causes. Nevertheless, the surveys report different results, and, to date, very few in-depth studies have been conducted on the factors that lead to such a shortage. This study aimed at investigating the factors that cause the shortage of the science and engineering workforce by looking at a recent survey on the actual employment conditions in manufacturing and major service industries. The study also estimated the determinant factors, based on the results of a survey conducted on 5,967 enterprises. Particularly, the probability of the workforce shortages are defined as a logistic probability function, which includes a diverse number of explanations that represent the characteristics of an enterprise and its internal demand conditions on workforce. The findings showed that key determinants include not only the factors that have been recognized by previous studies, but also research propensity and competitiveness aw well as the enterprises' internal demand conditions on human resources. In other words, an enterprise is more exposed to the problem of workforce shortage when it performs its R&D more proactively and its innovative activities are more organized. It has been further analyzed that the R&D and internal demand variables are more eminent to the shortage problem on skilled workers, which proves the shortage of workforce is not only caused by the quantitative aspect but also hold qualitative aspect characterized by skill obsolescence and mismatch in the labor market.