• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.9
• /
• pp.85-91
• /
• 2022

The demand for electric vehicles has increased because of environmental regulations. The lithium-ion battery, the most widely used type of battery in electric vehicles, is composed of a cathode, an anode, and an electrolyte. It is manufactured according to the pole plate, assembly, and formation processes. To improve battery performance and increase manufacturing efficiency, the manufacturing process must be optimized. To do so, simulation can be used to reduce wasted resources and time, and a finite-element method can be utilized. For high simulation quality, it is essential to reflect the material properties of the electrode by considering the pores. However, the material properties of electrodes are difficult to derive through measurement. In this study, the representative volume element method, which is a homogenization method, was applied to estimate the representative material properties of the electrode considering the pores. The representative volume element method assumes that the strain energy before and after the conversion into a representative volume is conserved. The method can be converted into one representative property, even when nonhomogeneous materials are mixed in a unit volume. In this study, the material properties of the electrode considering the pores were derived. The results should be helpful in optimizing the electrode manufacturing process and related element technologies.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1998.03a
• /
• pp.129-135
• /
• 1998

The present automated manufacturing environment is very different when the classical statiscal process control method based on batch processing were used. Therefore these must be replaced by automated statiscal process control method. In this point of view , this study intends to develop the automated statiscal process control method which can be implemented in the proesent automated manufacturing environment . Specially this study suggested modified control limit line and developed the rule to identify the special cause of the manufacturing process in the aspect of the ppm manegement.

• IE interfaces
• /
• v.14 no.1
• /
• pp.20-29
• /
• 2001

This paper presents a concurrent design approach that deals with manufacturing cell formation and cellular layout in Cellular Manufacturing System. Manufacturing cell formation is to group machines into machine cells dedicated to manufacture of part families, and cellular layout problem determines layout of the manufacturing cells within shop and layout of the machines within a cell. In this paper, a concurrent approach for design of machine cell and cellular layout is developed considering manufacturing parameters such as alternative process plans, alternative machines, production volume and processing time of part, and cost per unit time of operation. A mathematical model which minimizes total cost consisting of machine installation cost, machine operating cost, and intercell and intracell movements cost of part is proposed. A hybrid method based on genetic algorithm is proposed to solve the manufacturing cell formation and cellular layout design problem concurrently. The performance of the hybrid method is examined on several problems.

• Journal of Powder Materials
• /
• v.31 no.3
• /
• pp.213-219
• /
• 2024

Additive Manufacturing (AM) is a process that fabricates products by manufacturing materials according to a three-dimensional model. It has recently gained attention due to its environmental advantages, including reduced energy consumption and high material utilization rates. However, controlling defects such as melting issues and residual stress, which can occur during metal additive manufacturing, poses a challenge. The trial-and-error verification of these defects is both time-consuming and costly. Consequently, efforts have been made to develop phenomenological models that understand the influence of process variables on defects, and mechanical/ electrical/thermal properties of geometrically complex products. This paper introduces modeling techniques that can simulate the powder additive manufacturing process. The focus is on representative metal additive manufacturing processes such as Powder Bed Fusion (PBF), Direct Energy Deposition (DED), and Binder Jetting (BJ) method. To calculate thermal-stress history and the resulting deformations, modeling techniques based on Finite Element Method (FEM) are generally utilized. For simulating the movements and packing behavior of powders during powder classification, modeling techniques based on Discrete Element Method (DEM) are employed. Additionally, to simulate sintering and microstructural changes, techniques such as Monte Carlo (MC), Molecular Dynamics (MD), and Phase Field Modeling (PFM) are predominantly used.

• International Journal of Aerospace System Engineering
• /
• v.1 no.1
• /
• pp.21-28
• /
• 2014

In this study, an investigation on mechanical properties of flax natural fiber composite is performed as a precedent study on the design of eco-friendly structure using flax natural fiber composite. The Vacuum Assisted Resin Transfer Molding-Light (VARTML) manufacturing method is adopted for manufacturing the flax fiber composite panel. The VARTML is a manufacturing process that the resin is injected into the dry layered -up fibers enclosed by a rigid mold tool under vacuum. In this work, the resin flow analysis of VARTM manufacturing method is performed. A series of flax composite panels are manufactured, and several kinds of specimens cut out from the panels are tested to obtain mechanical performance data. Based on this, structural design of chemical storage tank for agricultural vehicle was performed using flax/vinyl ester. After structural design and analysis, the resin flow analysis of VARTM manufacturing method was performed.

• Journal of the Korean Institute of Plant Engineering
• /
• v.23 no.4
• /
• pp.29-38
• /
• 2018

Through process quality information, the time required for process quality analysis has been drastically shortened, the process defect rate has been reduced, and the manufacturing lead time has been shortened and the on-time delivery rate has been improved. Therefore, The purpose of this study is to develop a quality information analysis system model that effectively shortens the time required for process quality analysis in automobile safety belt parts manufacturing process. As a result of experiments on communication operation between manufacturing execution system (MES) quality server, injection machine control computer, injection machine programmable logic controller (PLC) and terminal, in analyzing quality information, the conventional handwriting input method took an average of 20 minutes, but the new multi-network method took about 2 minutes on average. In addition, the process defect rate was reduced by 13% and the manufacturing lead time was shortened from 28 hours to 20 hours. The delivery compliance rate improved from 96 to 99%.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.8
• /
• pp.879-886
• /
• 2012

The ultrasonic horn used for bonding of flip chip has been designed to vibrate at a natural frequency. The ultrasonic horn must be manufactured accurately in physical terms, because the small change of mechanical properties may result in the significant change of natural frequency. Therefore, tight tolerance is inevitable to keep the natural frequency in acceptable range. However, since tightening of the tolerance increases the manufacturing cost significantly, trade-off between the cost and accuracy is necessary. In this research, an attempt was made to design the ultra sonic horn within acceptable natural frequency while the manufacturing cost was kept as low as possible. For this purpose, among the 18 tolerances of physical terms of the ultrasonic horn, the most important 4 factors were selected using Taguchi method. The equation to relate those main factors and the natural frequency was made using response surface method. Finally, optimal design scheme for minimum manufacturing cost without a loss of performance was determined using SQP method.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.3
• /
• pp.15-19
• /
• 2007

This paper proposes a maintenance method to integrate worker's safety concerns into the process activities of the manufacturing system and it is to be considered as a part of the scope of maintenance engineering. The proposed method incorporates worker's health and safety considerations into maintenance engineering in each of the manufacturing process using reliability analysis. It can help to make a better planning and implementation of maintenance activities for the manufacturing system.

• Proceedings of the KIEE Conference
• /
• 2000.07e
• /
• pp.13-16
• /
• 2000

This paper developed a manufacturing method for resin magnet contained rare earth element and synthetic resin. Use this manufacturing method, developed a electro wave absorbent material and plant growth promote machine. Result of experiments shown to have excellent on bean sprouts cultivate, computer monitor, television monitor and cellular phone etc.

• Journal of Korean Society for Quality Management
• /
• v.25 no.1
• /
• pp.116-134
• /
• 1997

The present automated manufacturing environment is very different when the classical statistical process control method based on batch processing were used. Therefore these must be replaced by automated statistical process control method. In this point of view, this paper intends to develop the automated statistical process control method which can be implemented in the present automated manufacturing environment. Specially this study developed the rules to identify the special causes of the manufacturing process in the aspect of the 100 PPM management, and a numerical example is demonstrated to verify the usefulness of these rules.