• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.2
• /
• pp.160-171
• /
• 1995

The size characteristics of lead particle which is one of the important factors associated with absorption of lead were ignored in establishing lead standard. This study was conducted to investigate distribution of lead particles by operation of industry. Aerodynamic Mass Median Diameters (MMD) of airborne lead particles in the battery and litharge manufacturing industry were $14.1{\mu}m$ and $15.1{\mu}m$, respectively. There was no significant difference between those two values(p>0.05). However, the diameters in radiator manufacturing and secondary smelting industry were $1.3{\mu}m$, $4.9{\mu}m$, respectively. Those were significantly smaller than the particle sizes in other industries(p<0.05). Total lead concentrations in the secondary smelting industry were higher than those in the battery and litharge manufacturing industry. Total lead concentrations in other industries except radiator manufacturing industry exceeded the standard of $50{\mu}g/m^3$. Only radiator manufacturing industry indicated lead concentrations significantly lower than those in other industries(p<0.05). Concentrations of lead particles smaller than $1{\mu}m$ defined as respirable fraction by OSHA's CPA model assumption were $72.4{\mu}g/m^3$ in the secondary smelting industry, exceeding $50{\mu}g/m^3$. The relationship of concentrations between total lead and lead of particles smaller than $1{\mu}m$ was log Y = 0.46 logX + 0.06(n=119, $r^2=0.44$, p=0.0001). Relationship of respirable lead concentrations between OSHA and ACGIH was significantly detected in the litharge and battery manufacturing industry(p=0.0001), but was not significant in the radiator(p=0.2720) and secondary smelting manufacturing industry(p=0.2394). As MMDs of lead particles generated in industry were small, difference of respirable lead concentration between OSHA and ACGIH became smaller. There was a significant difference between concentrations respirable lead defined by two organizations such as OSHA and ACGIH in the battery and litharge manufacturing industry. Average concentration of respirable lead by ACGIH definition was 43.3 % of total lead in secondary smelting and 48.9 % in radiator manufacturing industry, and lower fractions were indicated in battery and litharge manufacturing industry. Relationships of total lead with IPM, TPM, and RPM were significant respectively(p=0.0001) and lead concentrations by particle size could be estimated using this relationship. Linear regression equation between total lead concentration(X) and ACGIH-RPM concentration(Y) was log Y = 0.76 log X - 0.40($r^2=0.89$, p=0.0001).

• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.2
• /
• pp.349-365
• /
• 2014

Chungcheongbuk-do can be said that it is not developed well because its surface accounts for 7.5% of Korea's whole land surface, and it accounts for 3.1% of population and main economical index from those of whole Korea. However, Chungcheongbuk-do should develop itself more by integrating of Cheongju-si and Cheongwon-gun, transfer of government facilities to Sejong city, and dispersing manufacturing companies of Seoul Metropolitan area. The factor which affects Chungcheongbuk-do's regional specialized industries is the distance from Cheongju-si and Gyeonggi-do. Service industries are specialized in urban area; manufacturing industries are specialized in regions which are close to Cheongju-si or Gyeonggi-do; and primary industries and consumer service industries are specialized in areas that is far from Cheongju-si. This study can be a foundation for studies on regional and industrial change of Chungcheongbuk-do by looking at its population and location quotient.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.1 no.2
• /
• pp.128-135
• /
• 1991

To obtain the basic information of environmental working status in mercury industries in Korea, 26 mercury industries were investigated with mercury concentration in air and various factors affecting on workplace environment. The results were as follows : 1. The mean air concentration of mercury was $0.046{\pm}0.035mg/m^3$ in 26 mercury industries. 2. The highest mean air concentration of mercury among 26 mercury industries classified by type of product was found in sodium hydroxide manufacturing industries ($0.054{\pm}0.020mg/m^3$) and the lowest mean was found in mercury battery manufacturing industries ($0.003{\pm}0.002mg/m^3$). 3. While the highest' mean air concentration of mercury was found in manual method ($0.061{\pm}0.041mg/m^3$) among the types of operation method, lowest one was found in automatic method ($0.035{\pm}0.025mg/m^3$). 4. While the mean air concentration of mercury was $0.023{\pm}0.018mg/m^3$ in good clean status of workshop, the mean air concentration of mercury in bad clean status was $0.06{\pm}0.033mg/m^3$. Among various factors affecting on th e air concentration of mercury, clean Iiness of workshop showed statistically significant difference with air concentration of mercury, and automation of workshop and local exhaust ventitlation also played important role in control the air concentration of mercury in the working environment.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.3
• /
• pp.11-19
• /
• 2020

This study seeks to measure inter-industry convergence systematically and quantitatively using structural holes theory. ICT industries were classified into ICT manufacturing and ICT service then efficiency and constraints were calculated using input-output tables. The results of the study revealed both ICT industries have very high information and control benefits in the process of industrial convergence, proving to be key industries with competitive advantage. Further implications were presented based on comparative analysis between ICT manufacturing and service and trend analysis over the past 15 years.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.643-648
• /
• 2005

Generally, ships have marks of various shapes on outside of the hull. Among them, so called "Draft Mark" indicates the distance from the bottom of the keel to the waterline. Draft marks are used to determine the displacement and other properties of the ship for stability and control purposes. These marks are made up of welding bead or sticking the steel plate on outside of the hull. To improve the confidence level of the ship owner, quality and accuracy of the draft mark is very important. So the automatic mark welding robot is used to enable a high quality and accurate manufacturing line. To improve the system portability, the system is divided into two distinct parts, namely mechanical part and control part. Mechanical part is robust, a lightweight, and easy to dismantle. The control part consists of an in-house developed controller, which is based on embedded Linux. Also, the control part consists of power line communication module to ensure the applicability of the controller in manufacturing line. In this paper, the methodologies of control and configuration of the robot are discussed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.2
• /
• pp.97-102
• /
• 2020

To prevent vibration of a vehicle's interior parts due to external impacts, the vehicle should be designed to reduce vibration and increase rigidity. In this paper, we conducted a vehicle test in which the vibration characteristics of a seatbelt resulting from the impact of a person closing a car door were measured and analyzed. A correlation analysis was performed using the finite analysis method. Based on this, a sensitivity analysis was performed, and an improved model was designed. We compared the natural frequencies and mode shapes of the improved and the initial models, which confirmed that the natural frequency of the improved model was more than 10 Hz higher than that of the initial model. Moreover, the response frequency of the improved model was three times higher than the input frequency applied in the vehicle test.

• Research in Community and Public Health Nursing
• /
• v.4 no.1
• /
• pp.45-57
• /
• 1993

The study was conducted with 27 health mangers working in manufacturing industries. The purpose of this study was to analyze the health manager's employment status, health examination, and it's follow. up health management level(about the industrial type). The results are as follows: 1. Characteristics of Manufacturing Industries: The ratio of nurse to employees is 1 : 552.6 and the percentage of physician employed was 51.9% All of the physicians were part time except one. 2. Health Examination and Follow Up ; 1) Periodic screening examinations were provided to 92.39% of the employees. Of these 11.56% required a detailed examination. Follow up on routine cases were done for 51.69%. Follow up on intensive cases were done 13.97%. 2) 62% of all employees working in hazardous conditions(noise, artificial light 74.1%) are required to receive a special health examination bi annually. Of these 96.66% were examined. 11.24% of these employees required a detailed follow up examination. 3. Relevancy between health management level, industrial type, and health manager's status 1) Health clinic operated separately except one case. Nursing activity level :. health diagnosis(0.27) Occupational condition (0.97) Health education(0.81) Health assessment(0.74) Health education level is higher at the industries working in environmental technician(P=0.017). The other's significance is not shown by any type of the staff.

• 사회경제평론
• /
• v.31 no.2
• /
• pp.39-69
• /
• 2018

We measured industrial labor income shares and investigated their determinants. Excluding industries where non-wage earners are not countable, we constructed 22 industry labor income shares from 1993 to 2015. Even though labor income shares in manufacturing industries declined more than in service industries, the economy-wide decline was not driven by structural changes but by within-industry effects. We found that rise in capital-labor ratio, R&D intensity, export dependence, and irregular job ratio contributed to the fall in labor income shares. When we examined manufacturing industries separately, overall results were about the same. But in that case we had additional findings that the rise in import dependence and outsourcing ratio lowered labor's shares, while minimum wage increases raised them.

• Advances in aircraft and spacecraft science
• /
• v.6 no.2
• /
• pp.157-168
• /
• 2019

The production of nonwoven fabrics from natural fibers is already expanding at an industrial level for simple curvature semi-structural part in the automotive industry. To develop their use for technical applications, this paper provides an experimental study of the mechanical behavior of flax-fiber nonwoven preforms. A comparison between different sets of carded needle-punched nonwoven has been used to study the influence of manufacturing parameters such as fibers' directions, the area and the needle punching densities. We have found that the anisotropy observed between both directions can be reduced depending on these parameters. Furthermore, this work investigates the possibility to form double curvature parts such as a hemisphere as well as a more complex shape such as a square box which possesses four triple curvature points. We propose a forming process adapted to the features of the nonwoven structure. The purpose is to determine their behavior under high stress during various forming settings. The preforming tests allowed us to observe in real time the manufacturing defects as well as the high deformability potential of flax nonwoven.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.64
• /
• pp.77-83
• /
• 2001

In this paper, we investigated the relationship between the variables related to manufacturing environment and industrial accident. Also we wish to analyze how much these variables influence in production result of company: the manufacturing performances such as production quantity, quality, cost and delivery. For this investigation, we collected the real data from 16 small/medium-sized manufacturing companies by performing a questionnaire survey and one-site interview with the workers. Sixteen companies were made up of the following four industries: metal processing, machinery manufacturing, chemical products manufacturing and electronic products manufacturing, The data analysis was made using SPSS PC+. Based on the result of the analysis, we came to the conclusion that most of variables related to manufacturing environment and industrial safety were connecting with industrial accident occurrence and also influenced in manufacturing performance.