• Journal of the Korea Society for Simulation
• /
• v.32 no.3
• /
• pp.33-41
• /
• 2023

As carbon-free has been getting interest, renewable energy sources have been increasing. However, renewable energy is intermittent and variable so it is difficult to predict the produced electrical energy from a renewable energy source. In this study, digital-twin concept is applied to solve difficulties in predicting electrical energy from a renewable energy source. Considering that rotation of wind turbine has high correlation with produced electrical energy, a model which simulates rotation in the drivetrain of a wind turbine is developed. The base of a drivetrain simulation model is set with well-known state equation in mechanical engineering, which simulates the rotating system. Simulation based machine learning is conducted to get unknown parameters which are not provided by manufacturer. The simulation is repeated and parameters in simulation model are corrected after each simulation by optimization algorithm. The trained simulation model is validated with 27 real wind turbine operation data set. The simulation model shows 4.41% error in average compared to real wind turbine operation data set. Finally, it is assessed that the drivetrain simulation model represents the real wind turbine drivetrain system well. It is expected that wind-energy-prediction accuracy would be improved as wind turbine digital twin including the developed drivetrain simulation model is applied.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.9
• /
• pp.135-145
• /
• 2009

Generally, the phases of constructing information systems are consisted of systems planning and selection, system analysis, system design, and system implementation and operation. These systems require many efforts and costs for additional development of modification requirements due to a frequent changes of business environments and business processes. Especially, inconsistencies between system design and system implementation usually happen during development steps because of the difficulties of program developments due to difficulties of capturing exact user requirements and frequent changes of user requirements. This paper proposes a scheme of implementing meta-data based applications for enterprises in order to reduce inconsistencies between system design and system implementation and to overcome limits of the existing coding-based development methods of applications which must use until disuse if they are developed once. Also, this paper presents a framework of repository system to systematically manage and utilize meta-data. The core concept of the proposed scheme makes outputs generated in the phases of system analysis and design into meta-data and is to easily develop and customize application programs using meta-data repository. Also, to show the applicability of the proposed scheme, it is applied to implement ERP system of 'H' automotive part manufacturer. As a result, the proposed scheme can gain improvements such as easiness and productivity of program development, easiness of maintenance, reusability of program components, etc.

• Korean Journal of Clinical Laboratory Science
• /
• v.54 no.1
• /
• pp.23-27
• /
• 2022

Disposable wet wipes provided by general restaurants in the Jeju Special Self-Governing Province were evaluated for compliance with the labeling requirements and the degree of bacterial contamination set by the Ministry of Food and Drug Safety. Of the 32 types of disposable wipes, five types of disposable wipes did not indicate the name and location of the business office of the manufacturer. Only 12 types of wet wipes were marked with the date of manufacture and expiration date. Bacterial contamination was seen in 9 types of wet wipes through bacterial culture but these were absent in the remaining 23 types (71.9%). The results of the antimicrobial susceptibility test for the 9 identified strains showed no methicillin-resistant coagulase-negative staphylococci (MRCNS) or multidrug-resistant bacteria. Through this study, it is recommended that the date of manufacture and expiration date must be indicated on the surface of disposable wet wipes designated as hygiene products, and clean uncontaminated wet wipes must comply with storage standards. In addition, the results are expected to contribute to the enhancement and improvement of hygiene management supervision, personal hygiene management, and an improvement in national health.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.160-167
• /
• 2023

An INS is a composite navigation system providing "added value" so defined if work stations provide Multi-Function Displays(MFDs) integrating information and functions for navigational tasks. Even though the minimum requirements for an INS are defined by IMO performance standards, a generic list of the devices and functions that constitute an INS does not exist, so the configuration of the INS is different for each manufacturer, and guidelines based on users' perspectives are also insufficient. This study was conducted to enhance the usability of the INS by analyzing the information required by users according to the ship's operating status and tasks and effectively structuring it in the MFD of the INS. By analyzing INS-related international standards and manufacturers' component equipment lists, mandatory navigation information was selected and card sorting tests were conducted on ship operators with experience in using MFDs to group the information required for each INS task. The results of the study can serve as a basic guideline for manufacturers to structure information based on users' experience when designing products.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.27 no.1
• /
• pp.42-46
• /
• 2023

Purpose The reference range described in Adrenocorticotropic Hormone reagent used in our laboratory is 10-60 pg/mL at 8 a.m. to 10 a.m., and 6-30 pg/mL at 8 p.m. to 10 p.m. However, in the case of outpatients, blood is mainly collected between 10 a.m. and 6 p.m., accounting for 57.8% of the total. Therefore, This study is intended to help make a more accurate diagnosis by reevaluating the reference range provided by the manufacturer of the Adrenocorticotropic Hormone reagent and setting split-timed reference range. Materials and Methods The patients collected blood before 10 a.m. were group A (68 people), and the patients collected blood after 10 a.m. were set to group B (80 people). A T-test was performed between groups to test their significance. And it was confirmed whether it was necessary to set the gender classification as a subgroup. The method of setting the reference range was calculated by the Bayesian's method and the Hoffmann's method. Results The reference range of Group A was 8.6 to 60.6 pg/mL by the Bayesian's method, and the Hoffmann's method was 3.6 to 61.3 pg/mL. The reference range of Group B was 6.9 to 50.5 pg/mL when applying the Bayesian's method, and the Hoffmann method's was 2.3 to 48.9 pg/mL. Conclusion This study was concluded that it was necessary to set the split-timed reference range. Through this study, the later the blood collection time, the lower the level of Adrenocorticotropic Hormone, indicating that blood collection time is important for patients with clinical significance. If a large number of subjects are selected and supplemented in the future, it is believed that systematic and accurate reference range can be set.

• Korea Trade Review
• /
• v.43 no.3
• /
• pp.101-124
• /
• 2018

After the establishment of the Korean Product Liability Act, a new clause on the burden of proof has been added and is being revised to meet the purpose of consumer protection. Article 3(2) of the new clause stipulates a provision for estimating a causal relationship when proving indirect facts to alleviate burden of proof. While consumer rights are increasing and public attention is drawn to consumer issues, problems are still emerging. In order to solve the problem, the U.S. Product Liability Act, which has strong consumer rights, was examined to describe the direction in which Korea's Product Liability Act should proceed in terms of consumer protection. The results of the comparative analysis show that the US has expanded the concept of strict liability in terms of rigorous liability, consumer dispute resolution, provable possibility, and litigation accessibility, The consumer dispute settlement system has thoroughly protected consumers by operating educational and systemic consumer ADR system. As for the possibility of proving, Korea has three provenances, and the United States has one. In the United States, where consumer lawsuits are frequent, lawsuits are more accessible than those in Korea, where the party responsible for proving is turned into a manufacturer and responsible for proving the case. This study focuses on consumer protection and provides implications for Korean product liability law.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.7
• /
• pp.475-484
• /
• 2018

The propulsion control device of an electric railway vehicle is a key main component corresponding to an engine of an automobile, and a device for controlling this is a device called a GDU (Gate Drive Unit). Also, when the frequency of failure of the propulsion control system was analyzed, the nonconformity ratio of GDU was the highest. GDU was not able to access core technologies due to the introduction of foreign products, and there were general problems with overall maintenance activities due to discontinuation of GDU of the manufacturer. The GDU has reached the end of its life with 23 to 14 years of long-term use.In order to solve these problems, this study was designed to identify the proper life span by analyzing compatible GDU's acquisition and failure, and to improve the existing system of maintenance focusing on health inspection. Maintenance of the components with a short life span compared to the entire service life is essential. Most foreign parts introduced at the beginning of the construction are not replaced due to technical problems or long-term operation. However, due to the characteristics of railway vehicles with a long life span of more than 25 years, it is necessary to maintain them for a long period of time. The study should be more concrete and empirical. The replacement type GDU of capacitors was able to easily measure the life of the capacitance by removing the capacitor modules, measure the life span of each unit test, and accurately perform preventive maintenance of the capacitor.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.103-114
• /
• 2023

Objectives: This study was conducted to evaluate hand-arm vibration (HAV) exposure levels due to the use of power hand tools and to evaluate the determinants in the automobile assembly process. Methods: The exposure level to HAV was evaluated for 30 work lines in five assembly processes (body, engine, chassis, door, and design) that use air-powered tools and battery-powered tools and operate in circulation for two hours. The 2-hr equivalent energy vibration acceleration, A (2), of the task was measured. The 8-hr equivalent energy vibration acceleration, A (8), was estimated in consideration of the number of tasks that can be performed per day by each process. In addition, a survey on the working environment was conducted with workers exposed to vibration. Results: The geometric mean of the HAV exposure level, A (2), for a total of 30 tasks was 2.51 m/s², and one case was 10.30 m/s², exceeding TLV (2hr). The HAV exposure level of A (8) was evaluated from 1.03 m/s² to 5.36 m/s². A (2) showed a statistically significant difference (P<0.01) for each process, and the chassis process (GM=3.90 m/s²) was the highest. The larger the tool size and the longer the tool length, the higher was the vibration acceleration when using a battery-powered tool than an air-powered tool (P<0.01). Battery-powered tool users showed higher dissatisfaction on all items than did air-powered tool users. Conclusions: As a result of this study, it is necessary to implement a program to reduce the HAV exposure levels.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.303-308
• /
• 2023

The purpose of this study is to provide a practical guide for establishing BSC that can be practically applied by SMEs. To this end, a case study was conducted to establish a performance evaluation system through a field-required Balanced Scorecard (BSC) for company J, a tent pole manufacturer, and to provide a management strategy system map. As a survey method, the requirements of the ordering organization were organized through a comparison of the BSC-related proposal requests in the first stage. The BSC establishment method was organized through the arrangement of the second stage result report. The 3rd stage BSC derived KPI indicators for SMEs for each of the 4 perspectives. A corporate vision was derived through a 4-step SWOT analysis. A strategy map was developed through 5-step field-required KPI, weight setting, and BSC. The 6-step final strategy system was also drawn up. As a result of the study, the four perspectives of the BSC were reconstructed by department. That is, the financial (financial) perspective is from the executives' perspective, the customer's perspective is from the sales department's perspective, the internal process perspective is from the design department/production quality department's perspective, and the learning/innovation perspective is from the management department's perspective. In addition, a total of 11 CSFs and a total of 49 KPIs of J company were derived. The limitation of the study is that the final strategy system through the company's BSC has only been carried out, and it needs to be linked with the company's compensation system in the future.

• Journal of Radiation Protection and Research
• /
• v.47 no.4
• /
• pp.195-203
• /
• 2022

Background: The aim of the present study was to determine radioactive concentrations in fertilizers known to contain essential nutrients. Results of this study could be used as basic data to monitor the impact of chemical fertilizers on the environment and public health. Nitrogen fertilizers, calcium fertilizers, sulfur fertilizers, phosphate acid fertilizers, and potassium chloride fertilizers were used in this study. Materials and Methods: Five chemical fertilizers were pulverized, placed in polyethylene containers, and weighed. The time to measure each specimen was set to be 3,600 seconds for a scintillator-based gamma-ray spectroscopy system. Concentration of gamma radionuclide was analyzed based on obtained spectra. At the end of the measurement, the spectrum file was stored and used to calculate radioactive concentrations using a gamma-ray spectrometer software. Results and Discussion: In the nitrogen fertilizer, 3.49 ± 5.71 Bq/kg of ¹³⁷Cs, 34.43 ± 7.61 Bq/kg of ¹³⁴Cs, and 569.16 ± 91.15 of ⁴⁰K were detected whereas ¹³¹I was not detected. In the calcium fertilizer, 5.74 ± 4.40 Bq/kg of ¹³⁷Cs (the highest concentration among all fertilizers), 22.37 ± 5.39 Bq/kg of ¹³⁴Cs, and 433.67 ± 64.24 Bq/kg of ⁴⁰K were detected whereas ¹³¹I was not detected. In the sulfur fertilizer, 347.31 ± 55.73 Bq/kg of ⁴⁰K, 19.42 ± 4.53 Bq/kg of ¹³⁴Cs, 2.21 ± 3.49 of ¹³⁷Cs, and 0.04 ± 0.22 Bq/Kg of ¹³¹I were detected. In the phosphoric acid fertilizer, 70,007.34 ± 844.18 Bq/kg of ⁴⁰K (the highest concentration among all fertilizers) and 46.07 ± 70.40 Bq/kg of ¹³⁴Cs were detected whereas neither ¹³⁷Cs nor ¹³¹I was detected. In the potassium chloride fertilizer, 12,827.92 ± 1542.19 Bq/kg of ⁴⁰K was and 94.76 ± 128.79 Bq/kg of ¹³⁴Cs were detected whereas neither ¹³⁷Cs nor ¹³¹I was detected. The present study examined inorganic fertilizers produced by a single manufacturer. There might be different results according to the country and area from which fertilizers are imported. Further studies about inorganic fertilizers in more detail are needed to create measures to reduce ⁴⁰K. Conclusion: Measures are needed to reduce radiation exposure to ⁴⁰K contained in fertilizers including phosphoric acid and potassium chloride fertilizers.