• 한국산업보건학회지
• /
• 제16권2호
• /
• pp.161-171
• /
• 2006

The objectives of this study were to ergonomically evaluate varying tasks performed in a general hospital and to propose their improving measures based on the evaluation results. The tasks found in the hospital were largely classified into two groups of manual materials handling and awkward posture related tasks. Ergonomic tools of NLE, 3-D SSPP and RULA were used for evaluating workload of the tasks. The major findings are: 1) L5/S1 compressive force of patient transferring by one person exceeded the maximum permissible limit(6,400N) by NIOSH. The L5/S1 compressive forces for most of the patient transferring tasks by 2-4 persons were larger than the action limit (3,400N), and the tasks by five persons were analyzed to be safe in the view of L5/S1 compressive force; 2) patient repositioning tasks by 2-3 persons were hazardous on the basis of L5/S1 compressive force, while most of the tasks by 4-5 persons were safe; 3) many tasks performed in wards were found to be stressful, most of which resulted from improper heights of their working tables or working points. Of varying tasks in general hospitals, patient transferring was the most stressful. Based on the results of this study and high prevalence of musculoskeletal disorders from other studies, it is recommended that the ergonomics program be introduced and enforced for doing improving activities systematically

• 대한안전경영과학회지
• /
• 제11권3호
• /
• pp.79-85
• /
• 2009

In this study, the effects of psychosocial stress (box color and precision demand) on muscle activity were evaluated in laboratory setting. Eight subjects performed sagittally symmetric lifting tasks. Box color (yellow, black), precision demand (yes, no), and box weight (5%MVC, 10%MVC, 15 %MVC) were varied and surface EMG signals from seven muscles(medial deltoid right, biceps brachii right, lateral triceps right, latissimus dorsi right, erector spinae right, external oblique right, internal oblique right) were recorded. EMG signals were band-pass filtered($10{\sim}400\;Hz$), rectified, RMS smoothed and normalized (NEMG). Analysis of variance tests were conducted on the total NEMG (TNEMG: the sum of the seven muscles' NEMGs) and on the individual muscle's NEMGs. Box color had no effect on the TNEMG and on the seven muscles activities(p>0.05). When precision demand was required at the end point of lifts, the mean NEMG showed higher values than no precision demand conditions: TNEMG (14% increase) and medial deltoid(40% increase), biceps brachii(10% increase), lateral triceps(26% increase), latissimus dorsi(25% increase) muscles. Those increases showed more conspicuous as the box weight increased in the muscles of medial deltoid, lateral triceps, and latissimus dorsi.

• 대한인간공학회지
• /
• 제27권1호
• /
• pp.45-51
• /
• 2008

The purpose of this survey was to identify ergonomic risk factors of work-related musculoskeletal disorders (MSD) and understand the current MSD risk status in the wholesale/retail industry. The field survey was conducted at 120 wholesale/retail establishments, and the cause of MSD occurred from the national industrial accident statistics by the Ministry of Labor in 2006 was analyzed in terms of company size, a term of work, job title, and cause of occurrence. The numbers of disasters on MSD were 602 which were included 432 disasters who met with low back pain by incident. A checklist was developed by KOSHA to use for the field survey. A total of 419 tasks were identified at the 120 establishments surveyed. The highest frequency was Task 2(45%) which was mostly observed in repetitive work (e.g. displaying, scanning, cutting or wrapping of goods). The second and third were Task 9(34%) and Task 8(14%) which were identified in manual materials handling (e.g. lifting, lowering, carrying or stocking of goods). The results suggest that the three Tasks should be first considered for the control in wholesale/retail industry and that exposure to MSD risk factors in those Tasks should be primarily addressed in order to reduce MSD risk in that industry.

• 전기학회논문지
• /
• 제57권12호
• /
• pp.2199-2201
• /
• 2008

Sulfur hexafluoride($SF_6$) is a gaseous dielectric used in high voltage electrical equipment such as an insultor or arc quenching medium in the transmission and distribution of electricity. however, $SF_6$ is one of the greenhouse gases(GHG) with a global warming potential that is 23,900 times greater than that of carbon dioxide($CO_2$). for this reason, $SF_6$ emissions in electric equipment shall be controlled to reduce GHG and improve cost-effective use of $SF_6$ for economical benefits. Until recently there has not been any investigation on $SF_6$ emission characteristics and inventory in Korea. To understand emission characteristics during the use-phase, the scope of this study was limited to the following closed pressure system equipment from 10 substations in Korea. This study highlights (1) the investigation of sampling/analysis methodology for $SF_6$ emissions in high voltage equipment, (2) the estimation of $SF_6$ emissions in the use-phase, and (3) the comparison between the emission ratio and the mass-balance applied to inventory study. According to this study, the majority of emissions were related to electric equipment nameplates and the rest of the emissions were related to the handling of $SF_6$ during operations. from this result, emission ratios estimated from this study were similar; GIS was 14% and GCB was 13%, as maintenance process conditions were the same as manual process conditions for both equipment.

• 대한인간공학회지
• /
• 제28권3호
• /
• pp.41-47
• /
• 2009

The purpose of this study, during the lifting task was researching the difference and a relationship between the ground reaction force and the grip strength by change of position. After grip strength has measured in symmetry position and asymmetry position at 45cm and 75cm of height of hand, ground reaction force was measured by same attitude lifting wooden box. We analyzed the difference of grip strength and ground reaction force in each position change. The results of grip strength, the grip strength of both hand were significant difference that in study subject symmetry and asymmetry position (p<0.01). The results of symmetry lifting task, the study subjects was significant difference of the ground reaction force difference by height (p<0.05). Asymmetry lifting task was significant difference of ground reaction force difference by direction of rotation was changed (p<0.01). The result of it will rotate with non-dominant hand side of lifting tasks from height 75cm where it easily maintains a balance possibility and decreasing the load of the hand. Therefore, from the workshop in the work people, it will be between the height 75cm and non-dominant hand side of trunk rotatory direction in the lifting tasks. Future study is necessary researched about the change of grip strength when the height of the hand is higher, and the difference of the ground reaction force when the change of weight.

• 대한인간공학회지
• /
• 제25권3호
• /
• pp.17-24
• /
• 2006

In this paper, we propose a stress analysis on foot by lifting task attitudes. Maximum force and peak pressure were measured on 8 body regions by Pedar system in order to analysis the stress which is affected by task style and angle on foot when Manual Materials Handling task. As for the peak pressure of the whole foot as to the task height during the lifting task, the height from Knuckle to Shoulder was the least in the peak pressure. Also, as for the maximum force and the peak pressure of the whole foot as to the task angle during the lifting task, it could be seen that the more an angle increases, the stress influencing on a foot jumps. As for the maximum force and the peak pressure by foot region as to the task height in case of the lifting task, the height from Knuckle to Shoulder is indicated the smallest value in the maximum force and the peak pressure, thus there is necessary to attain the work design that considered this. Also, as for the maximum force by foot region as to the task angle in case of the lifting task, 0° tasking is indicated to be least, thus there is necessity to be attained the tasking design in a bid to prevent the existence of an angle. The results of this paper are thought to be helpful to the suitable work design, to the prevention of musculoskeletal disorders related to the lower limbs, and to the design of ergonomic safety shoes.

• 한국산업정보학회논문지
• /
• 제5권2호
• /
• pp.1-8
• /
• 2000

인력물자취급(MMH)작업은 작업현장에서 육체적 상해와 요통(LBP)을 발생시키는 주요 원인 중에 하나이며 이러한 산업재해는 점점 증가하고 있는 실정이다. 특히 좋지 않은 작업환경 즉, 비탈진 경사면에 위치한 농장이나 과수원, 항만부두의 하역작업, 경사진 벌목장 작업, 광산의 막장에서의 작업은 많은 재해의 위험성을 초래하며, 신체균형의 상실은 근골격계(musculoskeletal System)의 부상을 초래하게 된다. 본 연구는 경사면에서의 들기작업시 작업자의 근육의 force information과 근피로도를 측정하기 위해 EMG 시스템을 이용하였다. 측정결과 AEMG의 경우 모든 조건에서 일반적으로 multifidus 근육에 걸리는 부하가 다른 근육에서보다 많은 것으로 나타났고, 15$^{\circ}$, 20$^{\circ}$인 경우 neck extensors의 사용이 많은 것으로 나타났다. MPF천이 결과 공통적으로 multifidus부위 근육의 천이정도가 가장 많은 것으로 나타났다. 근육별 부하(%)에 대한 결과는 deep spinal 근육인 multifidus, erectorspinae부위가 상대적으로 많은 것으로 나타났고 neck extensor부위는 근육분담이 적은 것으로 나타났다.

• 한국산학기술학회논문지
• /
• 제16권11호
• /
• pp.7941-7948
• /
• 2015

열차 운행시에 발생하는 전동소음은 열차 차륜과 레일 표면조도의 불균일성에 의하여 가진된 진동에 의해 발생된다. 따라서 열차 전동소음의 전달, 예측 및 분석을 위해서는 차륜과 레일표면의 음향조도(acoustic roughness)의 정확한 측정과 분석이 필요하다. 그러나 현재의 레일표면의 조도측정을 위한 장치와 방법은 작업자의 수작업에 의존한 트롤리 장치를 사용함으로써, 불일정한 측정속도와 흔들림과 같은 불안정한 인터페이스를 야기하여 측정값의 오차와 외란을 증대시키는 단점을 지닌다. 본 논문은 철도궤도의 레일상에서 자율 정속 주행하면서 레일표면의 음향조도를 측정하는 자동화 측정장치 및 플랫폼을 개발함으로써, 측정정밀도를 향상시키고 측정값의 불균일성을 감소시켰다. 또한 측정값의 신뢰도와 정확도 향상을 위해 동일한 복수의 변위센서 적용법을 제안하였으며 표준레일구간의 현장측정을 통해 동일 변위센서로부터 융합된 데이터의 정확성을 검증하였다.

• Industrial Engineering and Management Systems
• /
• 제4권1호
• /
• pp.47-53
• /
• 2005

The efficiency of fabrication (fab) operation is one of the key factors in order for a semiconductor manufacturing company to stay competitive. Optimization of manpower and forecasting manpower needs in a modern fab is an essential part of the future strategic planing and a very important to the operational efficiency. As the semiconductor manufacturing technology has entered the 8-inch wafer era, the complexity of fab operation increases with the increase of wafer size. The wafer handling method has evolved from manual mode in 6-inch wafer fab to semi-automated or fully automated factory in 8-inch and 12-inch wafer fab. The distribution of manpower requirement in each specialty varied as the trend of fab operation goes for downsizing manpower with automation and outsourcing maintenance work. This paper is to study the specialty distribution of manpower from the requirement in a typical 6-inch, 8-inch to 12-inch wafer fab. The human resource planning in today’s fab operation shall consider many factors, which include the stability of technical talents. This empirical study mainly focuses on the human resource planning, the manpower distribution of specialty structure and the forecast model of internal demand/supply in current semiconductor manufacturing company. Considering the market fluctuation with the demand of varied products and the advance in process technology, the study is to design a headcount forecast model based on current manpower planning for direct labour (DL) and indirect labour (IDL) in Taiwan’s fab. The model can be used to forecast the future manpower requirement on each specialty for the strategic planning of human resource to serve the development of the industry.

• 한국정밀공학회지
• /
• 제28권12호
• /
• pp.1388-1396
• /
• 2011

This paper is focused on the procedure of the development of a micro air vehicle which has vertical take-off and landing capability for indoor reconnaissance mission. Trade studies on mission feasibility led to the proposal of a coaxial rotorcraft configuration as the platform. The survey to provide a guide for preliminary design were conducted based on commercial off-the-shelf platform, and the rotor performance was estimated by the simple momentum theory. To determine the initial size of the micro air vehicle, the modified conventional fuel balance method was applied to adopt for electric powered vehicle, and the sizing problem was optimized with the sequential quadratic programming method using MATLAB. The designed rotor blades were fabricated with high strength carbon composite material and integrated with the platform. The developed coaxial rotorcraft micro air vehicle shows stable handling quality with manual flight test in indoor situation.