• Journal of Korean Living Environment System
• /
• v.24 no.1
• /
• pp.95-106
• /
• 2017

The purpose of this study was to evaluate comfort functions while wearing firefighters' protective gloves in dry and wet conditions at $70^{\circ}C$ air temperature with radiant heat. Four types of firefighting gloves from Korea, Germany, United States, and Japan were evaluated in both dry and wet conditions by eight male firefighters. Firefighters put their hands and forearms wearing gloves into a hands-radiant chamber that maintained at an air temperature of $70{\pm}2^{\circ}C$ ($T_a$) and globe temperature $106^{\circ}C$ ($T_g$). During the exposure, subjects followed a fixed protocol of manual movements and stopped the exposure when they felt being intolerable. Results showed that completion time was extended by 6 min on average when gloves got wet and 15 min for the Japanese gloves was extended when compared to its dry condition (p<.001); microclimate humidity on the palm at the last stage was greater for wet conditions than dry conditions in the all gloves; and skin temperatures on mid-fingertip, palm, and hand were significantly lower for wet conditions than dry conditions especially for Japanese gloves (p<.001). These results indicate that the exposure time without thermal pain to radiant heat could be extended by wetting gloves during the low radiant heat exposure.

• Journal of radiological science and technology
• /
• v.38 no.3
• /
• pp.221-228
• /
• 2015

Purpose: In digital mammography QC program was used for the purpose of reducing low-dose and high-definition images of the radiation dose. Materials and Methods: In digital mammography using a QC phantom according to the average glandular dose in the exposure method MLO view $0^{\circ}C$, $30^{\circ}C$, $45^{\circ}C$, $50^{\circ}C$, $55^{\circ}C$, $70^{\circ}C$, was measured at $90^{\circ}C$ intervals, an image with Hologic QC program to the SNR and CNR was measured to evaluate. Results: The average dose in the MLO view was wired to $90^{\circ}C$ when the maximum was 1.75 mGy, it decreased approximately 6% was measured at $45^{\circ}C$ 1.65 mGy. In addition, 1.67 mGy, manual record, there were an average wired in accordance with the exposure dose and the dose of 1.52 mGy difference in the way auto filter. Image quality evaluation at every angular section SNR 50 ~ 52, shows a slight difference in CNR 11 ~ 12, it was included in the manufacturer's recommended value. Conclusion: The dose was lowest in MLO view $45^{\circ}C$, the difference between SNR and CNR were insignificant. The method of exposure will need a way to reduce the exposure of the patient's body or unnecessary patient by placing a difference in settings in which the characteristics.

• Journal of radiological science and technology
• /
• v.44 no.1
• /
• pp.39-46
• /
• 2021

This study confirmed the usefulness of the copper filter according to the mode change by comparing and analyzing the energy change according to the application of the copper filter and the change in effective dose and image quality according to the distance to the subject in the DR(Digital Radiography) system. The average energy increased when the copper filter was applied and the reduction rate by 50% of mAs was increased as the thickness of the copper filter increased according to the application of the 10 kVp rule in AEC mode. The effective dose decreased as the thickness increased when the copper filter was applied in AEC(Automatic Exposure Control) mode and manual mode according to the application of the 10 kVp rule, and the decrease rate decreased with increasing 10 kVp increments. As a result of analyzing the dicom images for AEC mode and manual mode with Image J. the PSNR(Peak Signal to Noise Ratio) values were approximate values of less than 30 dB for each mode and for each copper filter thickness. When the copper filter was applied, the average energy increased, so when the 10 kVp rule was applied, the mAs for each mode could be reduced, and the effective dose could also be reduced. However, as the distance and tube voltage increased, the reduction rate of mAs decreased, and the quality of the image was found to decrease when the copper filter was applied, but there was no difference in quality of the image when the copper filter thickness increased.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.3
• /
• pp.248-251
• /
• 2008

During survey of blood lead concentration of workers who worked in lead refining industry, we found that some foreign workers showed increased blood lead level compared with that of domestic workers. The mean concentration of lead in blood for foreign workers (15%, 13 workers, mean age: 29) was 55.8 ug/dL which was over biological exposure index, while that of Korean workers (85%, 76 workers, mean age: 42) was 28.9 ug/dL. Some other biological markers of lead exposure such as ZPP and ${\delta}-ALA$ also showed elevated levels. Most of foreign workers stayed in dormitories near or in the factories that may cause to let them under the condition of 24 hours exposure of lead. The lack of safety manual on proper prevention of lead exposure in their own language for effective communication may be one of reasons of elevated blood lead concentration of foreign workers.

• The Journal of Korea CHUNA Manual Medicine
• /
• v.4 no.1
• /
• pp.1-16
• /
• 2003

Objectives : The purpose of this study is researching for possibility that Moire topography be applied in group school screening for scoliosis known school health problem, and find acceptable method of early detection and early treatment for scoliosis Methods : The authors practiced Moire topography for primary & middle school 1,895 students[male 976, female 919] in Jeonju, korea in 2001. After we distinguished students who had abnormal finding in Moire topography and then re-examined spinal X-ray analysis. The data was analysed and evaluated statistically Results : According to this research, the abnormal finding in Moire topography was 53.7% (1,018 students), and students needed X-ray re-examination were 11.2% (213 students). Students diagnosed scoliosis by X-ray re-examination were 1.8%. According to statistical analysis, interval between vertical base line of pelvis and vertical base line of neck, gap between left distance and right distance to the vertical base line of pelvis and difference of contour lines have strong correlations with deformity degree of the body surface examined by Moire. Conclusions : Following this research, throughout early detection for scoliosis by Moire topography could reduce exposure from scoliosis radiographs, and could detect trunk asymmetry that couldn't be found existing X-ray examination, so it made selecting students under observation who have bad posture possible.

• Journal of radiological science and technology
• /
• v.37 no.2
• /
• pp.101-107
• /
• 2014

The purpose of this study was investigated optimal exposure condition in digital magnification mammography to decrease radiation dose and increase image quality of the examinee. Auto mode, the average glandular dose is higher than the manual mode. Average glandular dose and image quality were many differences on between grid and air gap technique in auto mode. However, Average glandular dose and signal-to-noise ratio were not different on between grid and air gap technique in manual mode. The signal-to-noise ratio was increased when using the air-gap technique in both mode. According to result, air gap technique may reduce average glandular dose and increase signal-to-noise ratio in digital magnification mammography.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.27 no.3
• /
• pp.69-78
• /
• 2021

Background: Approximately 30% of people suffer from chronic neck and shoulder pain. Chronic neck and shoulder pain arise due to the exposure to continuous low loading and monotonous work. This is a common musculoskeletal disorder in a society. As physical therapists, we should give appropriate treatment to these people. Methods: A total of 26 patients with chronic neck and shoulder myalgia were randomly allocated into two experimental groups. First, 13 patients received shoulder strength training, while the other 13 patients received cervical mobilization. Outcome measures included bilateral pressure pain threshold by using an algometer at upper trapezius, visual analogue scale (VAS) to express their pain scale, and muscle tension by using myoton pro device pre-intervention and after the final treatment. Results: The VAS and muscle tension in upper trapezius significantly decreased (p<.05) in both groups; however, no differences between two groups were observed (p>.05). The pressure pain threshold in upper trapezius significantly increased (p<.05) in both groups; yet, again, the differences between the groups did not reach statistical significance (p>.05). Conclusion: As methods of treatment, shoulder-specific strength training and cervical mobilization can be appropriate approaches to the treatment of neck and shoulder musculoskeletal disorder.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.2 s.53
• /
• pp.239-254
• /
• 1996

Health services on industrial noisy environment have been provided only for noise-induced hearing loss management until now. But gradually, modem diseases and death have come to be related to stress and mental health deeply, therefore noise-induced mental disorder, like a stress became very important. In this point, the purpose of this study was to analyze the relationship between noise exposure level in worksite and workers' stress symptoms. This study included a survey of 786 manual workers selected from 89 worksites in 21 factories in Puchon. The results were as follows: 1. For demographic characteristics, most of the workers were males(80.8%), the $20\sim29years$ old were 34.5% and those who graduated from high school were 65.3%. The workers whose monthly income ranged from 100,000 to 800,000 won were 37.5% and who have a religion were 47.9%. 2. For occupational characteristics, workers who had worked $1\sim5$ years in the factories were 33.0%. Those who were much for them workload were 43.9% and who worked more than 8 hours a day were 73.9%. Those who were disatisfied with their job and pay were 31.9% and 50.6%. The workers who responsed ventilation condition of their worksites were bad were 51.9% and the dissatisfed with working environment of their worksites were 45.9%. 3. Workers who were suffering from tinnitus were 53.3% and those who perceived hearing loss were 50.1%. Persons who reported they always wore earplugs at work were 35.4%. Those who felt earplugs bigger than their ears were 30.6% and those who experienced eardiseases caused by earplugs were 25.6%. 4. For the noise exposure level in worksite, workers who were exposed to $80\sim90dB$ were 30.3%, $90\sim100dB$ were 26.4% and $50\sim70dB$ were 19.2%. 5. Workers' stress symptoms were significantly related to marital status and their monthly income(p<0.05). Workers who were single and had lower monthly income showed higher PSI (Psychiatric Symptom Index) scores than those who were married and had higher monthly income. Higher PSI scores were also significantly related to $1\sim2$ days hight-work per week, much for them workload, dissatisfaction with their job, and bad relationship with their bosses and coworkers. 6. Higher PSI scores were significantly related to severe tinnitus and perceived hearing losso(p<0.001). Workers who felt the earplugs they use did not fit their ears showed significantly higher PSI scores(p<0.01). Workers who reported that they did not feel they need earplugs showed. significantly higher PSI scores (p<0.05). Increased experience of eardisease caused by earplugs that did not fit were also significantly related to higher PSI scores(p<0.01). 7. The higher noise exposure level in worksite from 80dB was, the more severe stress symptoms including PSI subparts were reported; Anxiety, Anger, Depression, and Cognitive disorder(p<0.001). 5. According to the results of stepwise multiple regression analysis, factors affecting workers' PSI scores were perceived hearing loss$(R^2=0.160)$, noise exposure level in worksite$(R^2=0.110)$, realtionship with coworkers, amount of workload, monthly income and relationship with bosses orderly and the total $R^2$ of this 6 factors was 0.371. 9. The most significant factors that have impact on manual workers' stress symptoms were perceived hearing loss and noise exposure level in worksite, especially noise exposure level in the worksite was the most affective factor on the depression symptom.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.2
• /
• pp.209-223
• /
• 1998

The aim of this study was to evaluate welders' exposure to hexavalent chromium (Cr(VI)) and nickel (Ni) during welding operations in a Korean shipyard. The airborne Cr(VI) and Ni concentrations were measured during metal inert gas (MIG) welding on mild and stainless steel, and manual metal arc (MMA) welding on mild steel. The geometric mean (GM) of Cr(VI) concentrations inside the welding helmet during MIG welding on mild steel were $0.0018mg/m^3$ inside a ship section, and $0.0015-0.0026mg/m^3$ at the welding shops. All of the personal breathing zone air samples were below the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value ($TLV^{(R)}$) of $0.01mg/m^3$. Conversely, eighty-eight percent(21 of 24) of the personal breathing zone air samples exceeded the National Institute for Occupational Safety and Health (NIOSH) recommended exposure limit of $0.001mg/m^3$. Ni was not detected on 20 of 23 air samples collected during MIG welding on mild steel. The three Ni samples above the limit of detection ranged from 0.015 to $0.044mg/m^3$. The GM of Cr(VI) concentrations during MMA welding on mild steel were $0.0013mg/m^3$, but Ni was not detected in the air samples during this operation. It is assumed that the airborne Cr(VI) and Ni during mild steel welding were derived from the base metals which contained about 0.03% Cr and 0.03% Ni. The GM of airborne total Cr, Cr(VI) and Ni concentrations during MIG welding on stainless steel were 4.02, 0.13 and $0.86mg/m^3$, respectively, and the levels of Cr(VI) and Ni were above the ACGIH-$TLV^{(R)}$. Cr(VI) comprised about 35.5% of the total chromium(Cr) from MIG welding on mild steel, and about 8.4% of total Cr from MIG welding on stainless steel. The ratios of Cr(VI) to total Cr were significantly different among welding shops. It was concluded that welders were exposed to high levels of Cr(VI) and Ni during welding on stainless steel, and were exposed to low levels of Cr(VI) even during welding on mild steel.

• Environmental Mutagens and Carcinogens
• /
• v.23 no.3
• /
• pp.85-93
• /
• 2003

Welders working in a confined space, like in the shipbuilding industry, are at risk of being exposed to high concentrations of welding fumes and developing pneumoconiosis or other welding-fume exposure related diseases. Among such diseases, manganism resulting from welding-fume exposure remains a controversial issue, as the movement of manganese into specific brain regions has not been clearly established. Accordingly, to investigate the distribution of manganese in the brain after welding-fume exposure, male Sprague Dawley rats were exposed to welding fumes generated from manual metal arc stainless steel (MMA-SS) at concentrations of $63.6{\pm}4.1$ $mg/m^3$ (low dose, containing 1.6 $mg/m^3$ Mn) and $107.1{\pm}6.3$ $mg/m^3$ (high dose, containing 3.5 $mg/m^3$ Mn) total suspended particulates for 2 hrs per day, in an inhalation chamber over a 60-day period. Blood, brain, lungs and liver samples were collected after 2 hr, 15, 30, and 60 days of exposure and the tissues analyzed for their manganese concentrations using an atomic absorption spectrophotometer. Although dose- and time-dependent increases in the manganese concentrations were found in the lungs and livers of the rats exposed for 60 days, only slight manganese increases were observed in the blood during this period. Major statistically significant increases in the brain manganese concentrations were detected in the cerebellum after 15 days of exposure and up until 60 days. Slight increases in the manganese concentrations were also found in the substantia nigra, basal ganglia (caudate nucleus, putamen, and globus pallidus), temporal cortex, and frontal cortex, thereby indicating that the pharmacokinetics and distribution of manganese inhaled from welding fumes would appear to be different from those resulting from manganese-only exposure.