• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.3
• /
• pp.163-173
• /
• 2001

The dynamic behavior characteristics of a small fishing crane for inshore and coastal fishing vessels was experimentally analyzed in order to improve the fishing operation and to reduce considerably manual work of fisherman. The small fishing crane was designed to be controlled electro-hydraulically by means of proportional valves and solenoid valves, and also to be controlled the speed of each operation. The dynamic behavior characteristics was investigated by measuring the changes of parameters such as oil pressure, swing angle of load, load tension, the lifting angle and the swing angle of crane arm when the arms extended in a side way was given a test load. The results obtained are summarized as follows: 1. The designed small fishing crane can be proportionally controlled by means of proportional valves and rapidly by operating the solenoid valves, respectively. The capacity, turning angle, maximum reach of crane were 2 T-M, $180^\circ$, 3.7m, respectively. 2. The vertical change of crane arm on the extension of lifting cylinder was $1.2^\circ$/cm, and the swing speed of crane arm due to the extension of swing cylinder by on/off operations of solenoid valves was $15^\circ$/sec, with the swing period of 1.4 sec and the angle fluctuation of $\pm$11.0$^{\circ}$. 3. When changing simultaneously the horizontal and vertical positions of the lifting load by on/off operations of solenoid valves, the swing and lifting speeds of crane arm were $4.46^\circ$/sec and $6.4^\circ$/sec, respectively. 4. The movements of the designed crane were particularly smooth as they are controlled with the aid of proportional valves than by means of solenoid valves.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.6
• /
• pp.465-475
• /
• 2014

Objective: The aim of this study is to investigate the effect of workload on musculoskeletal degeneration. Background: It is important that workers maintain a health body for a long time as a measure of aging workers. In order do so, it is necessary to find out if workload can effect on musculoskeletal degeneration. Method: Epidemiological studies on workload or occupation and disc degeneration, osteoarthritis of knee were identified through database and bibliography searches. Results: Epidemiological studies showed that workload certainly effect on musculoskeletal degeneration. But we couldn't know which of individual factors and occupational factors further contribute to the musculoskeletal degeneration. And we could find that studies on workload and genetic factors were very few. In addition, there was also very few studies that it was possible interaction between individual factors as obesity and occupational factors as heavy manual lifting. Conclusion: Our reviews suggest that it need to conduct study between workload and genetic factors for musculoskeletal degeneration. This further study can identify attributable risk of workload for musculoskeletal degeneration, and contribute to the measure of aging workers. Application: This paper can help to establish research plan for the measure of aging workers.

• Journal of Biosystems Engineering
• /
• v.36 no.1
• /
• pp.9-14
• /
• 2011

This study was carried out to develop a vine crusher for harvesting sweet potato. The experimental two-row vine crusher attachable to agricultural tractor composed of vine crushing part with frail type vine crushing blades and vine lifting blades, power transmission part with chain and gear transmission mechanism, crushing height control part with two control wheels and manual levers, and implement frames, was designed and fabricated. And this vine crushing performance was also analyzed. From vine crushing tests, backward travel direction (i.e., rotational direction of the vine crushing blades) showed better vine crushing performance than forward travel direction. Crushing ratio of remained vine was increased, and length of remained vine and length of crushed vine were decreased as working speed was decreased and rotational speed of vine crushing blades was increased. At a working speed of 0.27 m/s and rotational speed of vine crushing blades of 800 rpm, crushing ratio of remained vine was 98%, length of remained vine was 104 mm, and length of crushed vine was 327 mm. But, when crushing vine on irregular ridges, vines and mulching vinyl were wound in the vine crushing part. Therefore, change of location of power transmission chain mechanism, and an automatic control device for controlling crushing height were needed.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.1
• /
• pp.45-51
• /
• 2008

The purpose of this survey was to identify ergonomic risk factors of work-related musculoskeletal disorders (MSD) and understand the current MSD risk status in the wholesale/retail industry. The field survey was conducted at 120 wholesale/retail establishments, and the cause of MSD occurred from the national industrial accident statistics by the Ministry of Labor in 2006 was analyzed in terms of company size, a term of work, job title, and cause of occurrence. The numbers of disasters on MSD were 602 which were included 432 disasters who met with low back pain by incident. A checklist was developed by KOSHA to use for the field survey. A total of 419 tasks were identified at the 120 establishments surveyed. The highest frequency was Task 2(45%) which was mostly observed in repetitive work (e.g. displaying, scanning, cutting or wrapping of goods). The second and third were Task 9(34%) and Task 8(14%) which were identified in manual materials handling (e.g. lifting, lowering, carrying or stocking of goods). The results suggest that the three Tasks should be first considered for the control in wholesale/retail industry and that exposure to MSD risk factors in those Tasks should be primarily addressed in order to reduce MSD risk in that industry.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.1
• /
• pp.1-10
• /
• 2015

Objective: The purpose of this paper is to evaluate old and newly designed ammunition boxes from an ergonomic point of view. Background: The ammunition boxes made of wood, which are currently used by the military, have some difficulties such as corrosion and damage of ammunition, environmental pollution, and stock management. Also, damages to the wooden ammunition boxes take place frequently, because soldiers carry them manually. Method: Sixteen participants volunteered to randomly perform lifting, carrying, and side-by-side moving tasks with 4 different old and new boxes, respectively for the ammunitions of 5.56mm, 60mm, 81mm, and 105mm in diameter. The old boxes are made of wood and are currently used in the military, while the new boxes are made of plastics. The joint moments of the elbow, shoulder, back, and knee were measured by using a motion analysis system and force platforms. In addition, an electromyographic system was used to measure the forces of hand and wrist muscles. Results: In most tasks, new boxes caused less joint moments at the elbow and shoulder than old boxes, because the new boxes were lighter and smaller than the old boxes. New boxes also derived less hand and wrist muscle forces due to the provision of fixed hard handles rather than string handles. Conclusion: The ergonomically designed new boxes could reduce the physical stresses of soldiers manually handling ammunitions and be helpful for storage and reuse. Application: This study shows an ergonomic application example for product development and evaluation.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.2
• /
• pp.35-41
• /
• 2021

Purpose : It is necessary to demonstrate the effect of non-invasive and non-pharmacological interventions such as manual therapy and therapeutic exercise for the management of nonspecific neck pain. In the present study, we aimed to investigate the efficacy of myofascial release therapy plus therapeutic exercise for disability owing to neck pain and quality of life in individuals with nonspecific neck pain. Methods : Eighteen participants with nonspecific neck pain were randomly allocated to intervention (n=9) and control groups (n=9). The intervention group received a myofascial release therapy for 20 min and performed neck stabilization exercises for 30 min twice a week for 4 weeks. The control group performed neck stabilization exercises for 30 min twice a week for 4 weeks at the same time points as the intervention group. Disability owing to neck pain and quality of life were quantified using the neck disability index (NDI) and the Korean version of the World Health Organization Quality of Life Brief Version (WHOQOL-BREF), respectively. NDI and WHOQOL-BREF were assessed before and after intervention. Results : The disability owing to neck pain significantly changed between the groups over time (total score of NDI, p=.049). There were significant time and group interactions in pain (pain intensity of NDI, p=.035) and concentration (concentration of NDI, p=.049). Personal care, lifting, reading, headaches, work, driving, sleeping, and recreation did not show significant improvement between the groups over time. Total score, overall quality of life and general health, physical health domain, psychological domain, social relationships domain, and environmental domain quantified by WHOQOL-BREF did not show significant improvements between the groups over time. Conclusion : These results suggest the clinical use of myofascial release therapy in addition to therapeutic exercise for the management of nonspecific neck pain. Further studies are needed to generalize the findings of this study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.675-684
• /
• 2020

To prevent safety accidents caused by aging pipe infrastructure and to maintain water quality, construction projects for water and sewage pipes are actively conducted across Korea. This study analyzed the criteria situations, site survey details, and regulation revisions related to the calculation of construction cost standards for pipe laying and joining work. The analysis showed that the major causes for revision are the unclear construction scope, limitations in implementing some pipe materials due to installation facility types, workforce focused on ordinary labor, limitations of manual laying work, and the lack of tool hire cost and machine expense-calculation criteria. Field studies were conducted to categorize the pipes according to their features, in addition to identifying the use of lifting heavy equipment and light equipment. In addition, excavation and testing work conducted in connection to pipe laying, as well as the use of skilled labor, were investigated. The current study clarified the work scope through new common items, provides an organization based on the pipe material, adjusted the workforce ratio to focus more on skilled labor, and developed grounds for calculating machine expenses. These revisions were estimated to save approximately 1.28% of the construction costs in each project according to an analysis of the construction cost impact study. truction costs in each project, according to an analysis of construction cost impact study.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.6
• /
• pp.697-706
• /
• 2006

Tower crane's wall tie is generally used for extending of mast height according to rising of lifting height. In order to get wall tie member force this problem, this study concerning wall tie is based on load data described in manual book of 290HC model. This study made the equation of wall tie member force and computer programming for calculating wall tie member force and then get ${\theta}-P$ curves(angle-wall tie force). After considering the ${\theta}-P$ curves, optimum angle range ($48.4^{\circ}{\sim}77.2^{\circ}$) about wall ties (A), (C) members was obtained. Member force of wall tie (B) was changed from tension to compression or from compression to tension at $74^{\circ}$ in service and $54^{\circ}$ in out of service. When both horizontal force($H_A$) and torsional moment ($M_D$) were varied from (+) to (-), wall tie force(A, B, C) were changed almost symmetrically about ${\theta}$-axis. Because this study was based on wall tie analysis conditions, wall tie members in symmetric and ideal geometry shape used for analizing wall tie of tower crane, it is necessary to have more careful verification in order to apply generally the results of this study.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.223-235
• /
• 1993

요통(Lowback Pain)을 유발하는 주요원인으로 알려져있는 MMH(Manual Materials Handling) 작업에 있어서 작업조건의 변화가 근육의 활동과 피로도에 미치는 영향을 평가하기 위해 4가지 서로 다른 작업조건하에서 몸통부위(Trunk)의 주요근육에 대한 EMG 파형분석을 실시 하였다. 본 연구에서의 분석대항작업은 실제 작업조건과 유사하레 설계된 120분간의 단속적인 인양(Lifting)/하역(Lowering) 작업으로서 작업중량은 작업자의 MVIS(Maximum Voluntary Isometric Strength)를 기준으로 설정되었으며, 매 10분 간격으로 EMG 측정이 이루어졌다. 작업물이 작업자의 정면에 위치한 대칭형(Symmetric) 작업의 경우 배면부(Dorsal) 근육인 천극근(Erector Spinae)과 활배근(Latissimus Dorsi)이 활동근(Active Muscle)인 것으로 나타났으며, 정중면(Medial Plane)을 중심으로 좌우측 근육이 동일한 근력을 발휘하였다. 작업물이 작업자의 한쪽 측면에 위치한 90도 비대칭형(Asymmetric) 작업의 경우 천극근과 활배근외에 작업물과 반대쪽 외사근(External Oblique)이 활동근으로 추가되었으며, 작업물과 반대쪽의 근육들이 더욱 큰 근력을 발휘하였다. 작업의 반복에 따른 근육의 피로도를 평가하기 위해 실시한 EMG 파형의 Spectral Analysis 결과, 비대칭형 작업시 작업물과 반대쪽의 천극근에서 작업시간의 경과에 따라 중위주파수(Median Power Frequency)가 저주 파수대로 천이(Lower Shift)하는 현상이 나타났으며, 일정한 작업량이라도 작업중량을 줄이고 작업 빈도를 높여서 작업할 경우에 이러한 현상이 더욱 두드러졌다. 작업시간의 경과에 따른 MVIS의 감소 현상은 작업빈도가 높고 비대칭형 작업일 때 가장 크게 나타났다. 총손실을 줄이고, 상대적 비용절감효과를 갖게할 수 있다고 하였다. 따라서 본 연구에서는 성인 여성기성복의 치수적합성을 높이기위하여 출산 후 중년에 접어 들면서 체형이 변화되는 것을 고려하여 연령을 분류하고(18세-34세, 30세-51세), 각 연령 집단에 따른 체형을 각각 3가지로 분류하였다. 이에 따라 의복 생산시의 총손실을 줄이기위한 상의, 하의생산시 필요한 부위별 최적규격치 간격을 제시하였다.적인 기능으로 보여지는 것에 좁혀서 작업능력의 연령증가 변화에 대하여다원적 평가를 하는 것이 실제적이라고 할 수 있다. 따라서 본 연구에서는 인간이 가지고 있는 다수의 기능중에서 수지교 치성과 연령증가와의 관계를 조사한다. 만약 연령증가 만으로 수지교치성을 평가 할 수 없는 경우에는 어떠한 요인이 수지기민성의 변화에 영향을 미치는가를 검토한다.t list)에서 자동적으로 사건들의 순서가 결정되도록 확장하였으며, 설비 제어방식에 있어서도 FIFO, LIFO, 우선 순위 방식등을 선택할 수 있도록 확장하였다. SIMPLE는 자료구조 및 프로그램이 공개되어 있으므로 프로그래머가 원하는 기능을 쉽게 추가할 수 있는 장점도 있다. 아울러 SMPLE에서 새로이 추가된 자료구조와 함수 및 설비제어 방식등을 활용하여 실제 중형급 시스템에 대한 시뮬레이션 구현과 시스템 분석의 예를 보인다._3$", chain segment, with the activation energy of carriers from the shallow trap with 0.4[eV], in he amorphous regions.의 증발산율은 우기의 기상자료를 이용하여 구한 결과 0.05 - 0.10 mm/hr 의 범위로서 이로 인한 강우손실량은 큰 의미가 없음을 알았다.재발이 나타난 3례의 환자를 제외한 9례 (75%)에서는 현재까지 재발소견을 보이지 않고 있다. 이러한 결과는 다른 보고자들과 유사한 결과를

• PNF and Movement
• /
• v.16 no.3
• /
• pp.485-493
• /
• 2018

Purpose: This study provides a treatment for central nervous system development in patients with chronic stroke by investigating changes in the upper limb function over time. The correlations among the activities, participation, and environmental factors of the international classification of functioning (ICF), disability and health are also examined. Methods: The subjects of this study are 18 patients with chronic stroke who were hospitalized and treated at 00 hospital in the Chungcheongbuk-do province. Their upper extremity functions are evaluated using the manual function test (MFT). The activities, participation, and environmental factors are evaluated using the ICF generic form. The correlations between the total scores of the affected and unaffected sides and the ICF items are analyzed using the Pearson correlation analysis. The significance level is p<0.05. Results: When the correlations between the activities and participation areas of ICF and the total score of the affected side of MFT were examined, significant correlations (p<0.05) were found in the following items: changing basic body position (D410), lifting and carrying objects (D430), moving around using equipment (D465), using transportation (D470), washing oneself (D510), caring for body parts (D520), and dressing (D540). When the correlations between the activities and participation areas of ICF and the total score of the unaffected side of MFT were examined, significant correlations (p<0.05) were found among writing (D170), speaking (D330), eating (D550), and drinking (D560). In addition, when the correlation between the environment area of ICF and the total score of the unaffected side of the MFT were examined, significant correlations (p<0.05) were found between products and technology for personal use in daily living (E115) and immediate family (E310). Conclusion: The MFT of patients with chronic stroke is closely correlated with the activities, participation, and environmental factors of ICF. This result suggests that ICF can be used as a useful tool to comprehensively evaluate the abilities of the patient, including the upper extremity function.