• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.199-201
• /
• 2003

The monitoring effectiveness not only depends on the effectiveness of the network, but also the costs of the network. Generally the costs of the monitoring network are mainly on the equipment and personnel; the implementation and maintenance; the observation and sample connection; the sample analysis; and the data storage and processing. The cost of the monitoring network can be expressed as a function of monitoring frequency because the monitoring method can be an automatic or a manual measurement. To determine the sampling frequency of subsidiary groundwater monitoring stations, time series data of national groundwater monitoring stations were used. The proposed optimal sampling frequency for subsidiary groundwater monitoring station is about 7 to 20 days and the average frequency is about 2 weeks.

• Publications of The Korean Astronomical Society
• /
• v.8 no.1
• /
• pp.47-66
• /
• 1993

The Automated Eichner Iris Photometer(AEIP) at the Korea Basic Science Center was tested for its function and the proper procedure for photographic photometry. The AEIP requires about three hours for reaching the electrical stability. When the iris is controlled automatically, the repeatability of density unit (DU) is accurate in the uncertainty of ($0.0028{\sim}0.0048$)DU. The iris reading is found to be accurate within the mean error of $0.^{m}05$, which could be reduced to $0.^{m}02$ by the manual control. To check the applicability of the AEIP. each two photographic plates for UBV colors which were taken by Dupuy and Zukauskas(l976) for the open cluster Byur 2, were measured by using the AEIP. and the photographic magnitudes and colors of the stars in Byur 2 were determined. discussing the previous results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.749-754
• /
• 1997

Nowadays domestic building market has undergone several changes. Labor costs are too high and materials are in short supply. These raised building costs and therefore lowered productivity. At this point it is the best way to reduce manual labor and find alternative materials that can improve productivity. In the building process form work take the most part of it. So many formwork systems were developed to reduce the construction period and labor cost. But their technical improvements just limited to adjust form shape-the role of form is not changed. This research developed a new formwork systems that can function to unify or minimze the unit process with cast-in-place type permanent form. In former study (reported in '97 spring seminar), we did the assembling test with column and beam clamps. Furthermore, In this paper, we examined the total systems of form erections and evaluated the structural performances.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.1
• /
• pp.57-61
• /
• 1984

This paper deals with the selection of minimal test instruction set for microprocessor data processing test. This test method is based on a function description of the instructions which are obtained from the data given by the user's manual. Selecting procedure is done in 3 steps: 1) a test execution graphs are represented on the instructions which are grouped functionally, 2) the essential graphs, the eliminable graphs, the eliminable graphs, and the eligible graphs are built, 3) optimal test instruction set from the essential graphs and the eligible graphs is defined. In the case of INTEL 8048, 50 test instructions can be selected optimally from 8048 instruction repertories (96 instructions)

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1944-1946
• /
• 2008

This paper analyzed orientation simulation of Stewart platform which is a parallel manipulator of 6-DOF. When platform shape had been given, inverse kinematics as the problem about length of actuator could get an answer using a vector function simply, and forward kinematics as the problem solving shape of platform through the length of actuator could get answer using repetitive and manual explaining Newton-Raphson method because it is expressed a high nonlinear polynomial expression. In addition, for control the Stewart platform it could drive simply and it could confirm the state of orientation in real-time.

• Journal of Korean Physical Therapy Science
• /
• v.11 no.1
• /
• pp.36-42
• /
• 2004

Evidence based physical therapy interventions for this patient was applied in 15 clinical sessions. Considering the patient's two main impairments, two physical therapy interventions were delivered with WOMAC index outcome measurement. From this case report, I observed that a combined physical therapy interventions consisting of manual therapy, therapeutic exercise, and TENS Unit in patients with knee osteoarthritis may result in decreased pain, stiffness and increased physical function.

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.235-246
• /
• 2014

The automatic seismic trip system (ASTS) continuously monitors PGA (peak ground acceleration) from the seismic wave, and automatically generates a trip signal. This work presents how the system can be designed by using a systems engineering approach under the given regulatory criteria. Overall design stages, from the needs analysis to design verification, have been executed under the defined processes and activities. Moreover, this work contributes two significant design areas for digitalized ASTS. These are firstly, how to categorize the ASTS if the ASTS has a backed up function of the manual reactor trip, and secondly, how to set the requirements using the given design practices either in overseas ASTS design or similar design. In addition, the methodology for determining the setpoint can be applied to the I&C design and development project which needs to justify the error sources correctly. The systematic approach that has been developed and realized in this work can be utilized in designing new I&C (instrument and control system) as well.

• Atmosphere
• /
• v.27 no.2
• /
• pp.251-258
• /
• 2017

The standard weighing raingauges have a capacity limit in measuring the amounts of precipitation. Exceptions are those using a siphon to drain the collected water during observations. To reduce the drain time of the siphon type or to overcome the hassles associated with the manual emptying of the bucket for measuring, the most of weighing gauges use a large bucket for storing of rainwater to be measured. To avoid the above-mentioned adverse requirements, we propose a paired barrel for a weighing raingauge. The paired barrel may improve the accuracy of the weighing raingauges by getting rid of their capacity limit and make the gauges smaller in size and lighter in weight than the conventional ones. We showed its proper function and the feasibility of realization by testing a prototype paired barrel.

• Journal of the Korean Society of Systems Engineering
• /
• v.1 no.2
• /
• pp.34-42
• /
• 2005

Logistic Support Analysis(LSA) and Logistic Supportability Review must be carried out as soon as possible in development stage in order to minimize operation/maintenance cost that head the list of weapon cost and improve logistic supportability of the weapon system. And the result must be used for hardware designs to set up to be able to input to the system design and logistic support elements. Therefore Logistic Support Elements must be planed/developed/supplied with the main combat system concurrently and performance and logistic supportability of the comabat system had better be improved mutually. This report describes maintenance concept changes of weapon systems, fault diagnosis function and test equipment state on the domestic MBT(main battle tank). And then it presents application and intensification of itself fault diagnosis system for a domestic future MBT considering connection with IETM(Interactive Electronic Technical Manual) and TE(Test Equipment).

• International Journal of Control, Automation, and Systems
• /
• v.4 no.5
• /
• pp.575-591
• /
• 2006

In a previous research, we presented the Grid Method and confirmed it as a systematic and efficient problem formulation method for the task-oriented design of robot kinematics. However, our previous research was limited in two ways. First, it gave only a local optimum due to its use of a local optimization technique. Second, it used constant weights for a cost function chosen by the manual weights tuning algorithm, thereby showing low efficiency in finding an optimal solution. To overcome these two limitations, therefore, this paper presents a global optimization technique and an adaptive weights tuning algorithm to solve a formulated problem using the Grid Method. The efficiencies of the proposed algorithms have been confirmed through the kinematic design examples of various robot manipulators.