• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2002년도 추계학술발표회
• /
• pp.111-124
• /
• 2002

Ship manoeuvring simulator has been widely utilized for training mariners, for assessing safety, for developing harbour and port, and for designing ships. We discuss a ship manoeuvring simulator which has been newly developed by Korea Maritime University. The simulator consists of simulator bridge and control console. All the computers used in the simulator are connected with one another by UDP or TCP network system. All the instruments are connected with interface computer by signal line which is controlled by RS232 communication protocol, or by voltage controlled A/D board. Next the mathematical model of ship manoeuvring motion in harbour areas, and ship and terrain modeling technique are also briefly discussed. Finally using the simulator an experiment of distance cognition and a simulation example of berthing/deberthing manoeuvre are shown.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2004년도 추계학술대회
• /
• pp.81-87
• /
• 2004

선박이라는 거대한 물체를 항만 또는 조선소내의 안벽에 접안하거나 이로부터 이안시키는 작업은 도선사나 도크 마스터의 고유한 업무로서 상당한 집중력과 고난도의 위험성을 내포하고 있다. 이와 같은 접이안 작업 시에는 터그에 사용량이 많아지고, 본선 이 저속으로 움직이므로 외력의 영향을 크게 받는다. 본 연구에서는 외력의 영향 특히 강풍 하에서 주로 터그를 이용하여 접이안 조종 작업을 수행할 수 있는 2차원 가상시스템을 구축하였다. 또한 조종위험도를 평가할 수 있는 객관적인 기준을 제안하고 이를 위해 시뮬레이션 실험을 수행하였다. 이 가상시스템을 이용하여 접이안 조종 작업을 수행한 결과 운항자가 주관적으로 체감한 위험의 정도를 수치화하여 표현한 주관적 평가와 조종운동과 관련된 주요 파라미터에 관련된 객관적인 지수와의 상관관계를 분석하여 조종위험도의 평 가 기법에 대해 논의한다.

• 한국항해항만학회지
• /
• 제27권6호
• /
• pp.639-643
• /
• 2003

The emphasis is put on the detailed knowledge on manoeuvring characteristic for the safe navigation while avoiding terrible collision between ships and on the guideline to the design and operation of the ship-waterway system The numerical simulation of manoeuvring motion was carried out parametrically for different ship types, ship-velocity ratios, separation and stagger between ships. As for the calculation parameters, the ratios of velocity difference (hereafter, $U_2$/$U_1$ ) between two ships were considered as 0.6, 1.2, 1.5. From the inspection of this investigation, it indicates the following result. Considering the interaction force only as parameter, the lateral distance between ships is necessarily required for the ship-velocity ratio of 1.2, compared to the cases of 0.6 and 1.5 regardless of the ship types. Furthermore, regardless of the ship-velocity ratio, an overtaking and overtaken vessel can be manoeuvred safely without deviating from the original course under the following conditions: the lateral distance between two vessels is approximately kept at 0.5 times of ship-length and 5 through 10. degrees of range in maximum rudder angle. The manoeuvring characteristic based on this investigation will be very useful for keeping the safety of navigation from the practical point of ships design and traffic control in restricted waterways.

• 대한조선학회논문집
• /
• 제57권4호
• /
• pp.230-240
• /
• 2020

The aim of this study was to investigate the manoeuvrability of a ship in different Center of Gravity (CG) conditions. Free Running Model Tests (FRMT), such as 35°turning circle tests, 20/20 zigzag manoeuvring tests, and 10/10 zigzag manoeuvring tests, were conducted in three GM and three trim conditions with 1/65.83 scaled KRISO Container Ship (KCS). The test results indicated that KCS in the lower GM condition and the trim by bow condition showed reduced advance and tactical diameter in turning circle tests and increased overshoot angles in zigzag tests, and those manoeuvring indices were strongly related with roll angle. In addition, sensitivity indices for three-axis CG position were suggested with prior research, and it showed that y-axis CG position significantly affected manoeuvrability of KCS due to the low GM. Therefore, in the case of KCS, it is evident that the roll angle during manoeuvre is closely related with manoeuvring indices.

• Journal of Ship and Ocean Technology
• /
• 제11권1호
• /
• pp.11-24
• /
• 2007

Better prediction of a ship's manouevrabilty in initial design stage is becoming more, important as IMO manoeuvring criteria has been activated in the year of 2004. In the present study, in order to obtain more exact and reliable results for ship manoeuvrability in the initial design stage, numerical simulation is carried out by use of RANS equation based calculation of hydrodynamic forces exerted upon the ship hull. Other forces such as rudder force and propeller force are estimated by one of the empirical models recommended by MMG Group. Calculated hydrodynamic force coefficients are compared with those obtained by empirical models. Standard manoeuvring simulations such as turning circle and zig-zag are also carried out for a medium size Product Carrier and the results are compared with those of pure empirical models and manoeuvring sea trial. Generally good qualitative agreement is obtained in hydrodynamic forces due to steady oblique motion and steady turning motion between the results of CFD calculation and those of MMG model, which is based on empirical formulas. The results of standard manoeuvring simulation also show good agreement with sea trial results.

• 대한조선학회논문집
• /
• 제46권2호
• /
• pp.114-126
• /
• 2009

The authors adopt the Unmanned Undersea Vehicle(UUV), which has taken the shape of manta(Sohn et al. 2006). They call here it Manta-type Unmanned Undersea Test Vehicle(MUUTV). MUUTV is based on the same design concept as UUV called Manta Test Vehicle, which was originally built and operated by the Naval Undersea Warfare Center(Lisiewicz and French 2000, Sirmalis et al. 2001). In order to evaluate manoeuvring motion characteristics of MUUTV, numerical simulation technique has been utilized. Previous mathematical model on manoeuvring motion of MUUTV(Sohn et al. 2006) is basically adopted. Result of static experiment carried out in circulating water channel and a part of NSRDC standard model(Feldman 1979) on rotational mode are supplemented. Some of the hydrodynamic derivatives are obtained from model experiment in circulating water channel and the rest of them are estimated.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권3호
• /
• pp.322-334
• /
• 2012

This paper shows the numerical and experimental results about the hydrodynamic characteristics of X-Twisted rudders having continuous twist of the leading edge along the span. All the results were compared with those of the semi-balanced rudder. Calculation through the Reynolds-Averaged Navier-Stokes Equation (RANSE) code with propeller sliding meshes shows large inflow angle and fast inflow velocity in the vicinity of ${\pm}0.7$ R from the shaft center, so it may cause cavitation. Also, X-Twisted rudder has relatively small inflow angles along the rudder span compared with semi-balanced rudder. For the performance validation, rudders for two large container carriers were designed and tested. Cavitation tests at the medium sized cavitation tunnel with respect to the rudder types and twisted angles showed the effectiveness of twist on cavitation and the tendency according to the twist. And the resistance, self-propulsion and manoeuvring tests were also carried out at the towing tank. As a result, in the case of X-Twisted rudder, ship speed was improved with good manoeuvring performance. Especially, it was found out that manoeuvring performance between port and starboard was well balanced compared with semi-balanced rudders.

• 한국시뮬레이션학회논문지
• /
• 제19권3호
• /
• pp.17-25
• /
• 2010

선박 조종 시뮬레이션을 구성하는 기동 모델은 대상 선박의 동역학적인 특성을 현실에 가깝게 구현해야 하며, 신속한 계산 및 결과 처리가 가능하여야 한다. 다중 선박을 대상으로 하는 실시간 조종 시뮬레이션에서는 계산 시간 단축을 위해 일반적으로 선회각이나 선회율, 또는 전진 속도에 대한 1차 미분방정식 모델을 사용하여 선박의 움직임을 구현하게 된다. 본 논문에서는 대상 선박의 선회 시험 정보가 주어져 있을 경우 이를 이용한 선박의 단순 기동 모델링 및 계수 추정법을 제안하였다. 전진속도가 일정한 모델과 전진 속도의 변화를 고려한 모델의 계수 추정법을 수학적으로 전개하였으며, 실선 선회 시험 자료를 이용하여 제안된 모델의 유용성을 검증하였다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2003년도 추계학술발표회
• /
• pp.123-126
• /
• 2003

In the present paper, the analysis is on the safe navigation between ships moving each other in restricted waterways under the external force, such as wind or current The numerical simulation of manoeuvring motion was carried out to propose an appropriate safe speed and distance between ships, which is required to avoid marine disasters from the viewpoint of marine safety. From the inspection q this investigation, it indicates the following result In case of proximal navigation between ships under the wind and current, the low-speed vessel is potentially hazardous because the rudder force if low-speed vessel needed for steady-state course-keeping is not sufficient, compared to the high-speed vessel The manoeuvring characteristic based on this investigation will be very useful for keeping the safety of navigation from the practical point of ships design and traffic control in restricted waterways.

• 대한조선학회지
• /
• 제22권2호
• /
• pp.1-11
• /
• 1985

Generally, the non-uniform flow with varying speed distribution ca be formed near narrow straits or waterways. One of the most dynamic modes of capsizing can occur as a result of manoeuvring of ships in non-uniform flow. This paper covers the investigation into the factors affecting the likelihood of server ship motions in non-uniform flow. Digital simulation of manoeuvring is carried out in order to predict conditions which could lead to serve ship motions in non-uniform flows. Hydrodynamic force derivatives of a container ship are used. Finally, possible conditions of severe ship motions are suggested and guidelines for reducing the liability to capsize are given both for the ship operator and the naval architect.