• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.4
• /
• pp.303-312
• /
• 2023

The determination of the oxidation states of metal elements in manganese nodules sheds light on the understanding of the formation mechanism of nodules, providing insights into the paleo-environmental conditions such as the redox potential of the aqueous system. This study aims to reveal the oxidation states and chemical bonding of manganese in the natural polymetallic nodules, utilizing conventional X-ray photoelectron spectroscopy (XPS). Specifically, shallow manganese nodules from the Siberian Arctic Sea, effectively recording mineralogical variations, were used in this study. Detailed analysis of XPS Mn 2p spectra showed changes in the manganese oxidation state from the center to the outer parts of the nodules. The central part of the nodules showed a higher Mn⁴⁺ content, approximately 67.9%, while the outermost part showed about 63% of Mn⁴⁺ due to an increase in the Mn³⁺+Mn²⁺. The decrease in the Mn oxidation state with the growth is consistent with the previously reported mineralogical variations from todorokite to birnessite with growth. Additionally, the O 1s spectra presented a predominance of Mn-O-H bonds in the outer layers compared to the center, suggesting hydration by water in the layered manganates of outer layers. The results of this study demonstrate that XPS can be directly applied to understand changes in paleo-environmental conditions such as the redox states during the growth of manganese nodules. Finally, future studies using high-resolution synchrotron-based XPS experiments could achieve details in oxidation states of manganese and trace metal elements.

• 한국해양학회지
• /
• v.27 no.3
• /
• pp.210-227
• /
• 1992

KODOS-89 area, the northwestern part of Clarion-Clarion-Clipperton fracture zones in the Northeast Pacific, was surveyed in order to study the occurrence and distribution of manganese nodules. Variations in the nodule characteristics are related mainly to seafloor topography. Nodules from abyssal plain have high Mn/Fe ratio and high Mn, Cu, Ni and Zn concentrations, whereas those from seamount are characterized by low Mn/Fe ratio and high Fe and Co concentrations. These compositional characteristics are attributed to toxic diagnosis and hydrogenesis, respectively. Nodules of the early diegenetic origin tend to accurate crystalline Mn-oxides uniformly within the topmost sediment layers and maintain a regular spheroidal, ellipsoidal to discoidal shape with rough surface textures. On the other hand, those of hydrogenetic origin are characterized by polynucleation, irregualr shape, and smooth surface textures. Nodule abundance is high (avg. 13.4 kg/m$^2$) in seamount area, resulting from ample supply of nucleating materials by auto-fragmentation of older nodules. Nodule abundance in abyssal plain is relatively low (avg. 3.9 kg/m$^2$) and tends to increase southward. This phenomenon results from facilitation of taking seed materials from adjacent seamount and enhancement of the early diagenesis by sufficient supply of organic materials. Nodule abundance is considered to be controlled primarily by seeding effects and secondly by supplies of organic materials.

• Ocean and Polar Research
• /
• v.28 no.4
• /
• pp.475-484
• /
• 2006

In order to reveal the vertical variation of physical properties in deep-sea sediments, deep-sea sediment cores were collected at 78 stations using a multiple corer in the KR5 area, one of the Korea contract areas for manganese nodule exploration, located in the northeast equatorial Pacific. Based on the color of sediments, sampled sediment cores were characterized into three lithologic units (unit 1,2, and 3). In all sediment cores, three units appear systematically; unit 1 lies at the top of cores and unit 2 and/or unit 3 appear to underlie unit 1 or alternate with unit 3. Unit 1 layer from the top of cores shows dark grayish brown to dark brown with mean thickness of 10.2cm. Unit 2 and 3 layers show very dark brown to black color and yellowish brown to brown color, respectively. According to the physical properties of the deep-sea sediment cores, sediment column can be divided into three sections. Section A $(0{\sim}15cm)$ in subbottom depth consists mostly of unit 1. Mean values of physical properties of section B $(15{\sim}30cm)$ in subbottom depth are similar to those of section C (>30 cm) in subbottom depth. However, the physical properties of section B were more variable than those of section C because of the high activity of bioturbation in section B. These results will provide valuable information for selecting suitable sites for mining manganese nodules in the Korea contract areas.

• Resources Recycling
• /
• v.21 no.5
• /
• pp.3-17
• /
• 2012

Selective leaching processes for copper, gold, nickel, and cobalt have been investigated because there is an advantage of ammoniacal hydrometallurgy that metal such as copper could be selectively extracted restricting the dissolution of iron or calcium. In the present article, the studies for selective ammoniacal leaching of copper from motor scraps and waste printed circuit boards (PCBs), for ammoniacal leaching of gold to decrease the amount of cyanide used or to substitute cyanide by thiosulfate, and for ammoniacal leaching to recover nickel and cobalt from nickel oxide ore and intermidiate obtained from manganese nodule treatment process were summarized and further studies were proposed for domestic technology development for ammoniacal hydrometallurgy processes.

• Ocean and Polar Research
• /
• v.36 no.4
• /
• pp.383-394
• /
• 2014

The surface sediments from the manganese nodule exploration area of Korea in the Clarion-Clipperton fracture zone were investigated to understand the resource potential of and emplacement mechanism for rare earth elements (REEs). The sediments are categorized into three lithological units (Unit I, II and III from top to bottom), but into two groups (Unit I/II and Unit III) based on the distribution pattern of REEs. The distribution pattern of REEs in Unit I/II is similar to that of Post-Archean Australian Shale (PAAS), but shows a negative Ce anomaly and enrichment in heavy REEs (HREEs). In Unit III, the HREE enrichment and Ce anomaly is much more remarkable than Unit I/II when normalized to PAAS, which are interpreted as resulting from the absorption of REEs from seawater by Fe oxyhydroxides that were transported along the buoyant plume from remotely-located hydrothermal vents. It is supported by the PAAS-normalized REE pattern of Unit III which is similar to those of seawater and East Pacific Rise sediments. Meanwhile, the PAAS-normalized REE pattern of Unit I/II is explained by the 4:1 mixing of terrestrial eolian sediment and Unit III from each, indicating the much smaller contribution of hydrothermal origin material to Unit I/II. The studied sediments have the potentiality of a low-grade and large tonnage REE resource. However, the mining of REE-bearing sediment needs a large size extra collecting, lifting and treatment system to dress and refine low-grade sediments if the sediment is exploited with manganese nodules. It is economically infeasible to develop low-grade REE sediments at this moment in time because the exploitation of REE-bearing sediments with manganese nodules increase the mining cost.

• Resources Recycling
• /
• v.25 no.1
• /
• pp.60-67
• /
• 2016

A scale-up test with a continuous solvent extraction and electro-winning system was carried out to separate and recover copper from a synthetic sulfuric acid solution (Cu 10.5 g/L, Co 2.0 g/L, Ni 15.0 g/L, Fe 0.2 g/L). The solution was introduced into mixer-settlers with four stages of extraction and two stages of stripping for continuous countercurrent solvent extraction to separate copper from nickel and cobalt. The loading was carried out using 40% LIX 84-I(v/v) as extractant with a phase ratio of A : O = 1 : 1. Meanwhile, the stripping was undertaken at a phase ratio of A : O = 1 : 1.5 using depleted electrolyte containing 35.0 g/L Cu and 180 g/L $H_2SO_4$ as stripping solution. The extraction and stripping efficiencies were found to be 96.7% and 91.0%, respectively. The copper composition of the stripped solution (pregnant electrolyte) was 50.0 g/L Cu with impurities of 25 ppm nickel, 5 ppm cobalt and 3 ppm iron. In the electro-winning process, copper metal of 99.833 purity was yielded with current efficiency of 98.9% and current density of $1.50A/dm^2$.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.3
• /
• pp.229-236
• /
• 2008

The deep-sea miner is the tracked vehicle system which drives on the deep-seabed and gathers a manganese nodules. The miner is operated by remote control in real-time by the station of surface vessel. So operating S/W is a important part of miner remote operating. At present, the test miner has been designed and manufactured for near-shore sea-test. The test miner consists of mechanical parts, and electric-electronic parts. Because those parts should be controled and monitored remotely, operating S/W for control and monitoring is necessary by all means. In this paper, real-time operating S/W for a control and monitoring of the test miner was designed and developed using PXI, embedded controller and LabVIEW. This real-time operating S/W was developed for an efficient test of test miner in a near seabed area. Moreover, database management system(DBMS) was developed too for the data management of test miner monitoring using MS SQL and LabVIEW.

• Economic and Environmental Geology
• /
• v.56 no.1
• /
• pp.1-11
• /
• 2023

In this study, we explore the morphological and geochemical characteristics for 440 manganese nodules collected from two different water depths [ARA12B-St52 (150 m, n = 239) and ARA12B-St58i (73 m, n = 201)] on the continental shelf of the East Siberian Sea from the ARA12B expedition in 2021. We also discussed the variations in the characteristics of manganese nodules with varying water depths in the Arctic Sea. The sizes of the nodules are generally greater than 3 cm at both sites. However, there is an obvious difference in the morphology with water depths. For the nodules collected at 150 m, brown-black colored tabular, tube, and ellipsoidal shapes with a rough surface texture are dominant. On the other hand, yellow-brown tabular shapes with a smooth surface texture are common for the nodules collected at 73 m. Furthermore, the slope of trend line between size and weight is significantly different at both sites: particularly, the slopes of nodules at 150 and 73 m are 1.60 and 0.84, respectively. This indicates the difference in the internal structure, porosity, and constituting elements between both nodules. Micro X-ray Flourescence (µ-XRF) results clearly demonstrate that the internal textures and chemical compositions are different with water depths. The nodules at 150 m are composed of a thick Mn-layer and a thin Fe-layer centered on the nucleus, while the nodules at 73 m are alternately grown with thin Mn- and Fe- layers around the nucleus. The average chemical compositions obtained by µ-XRF are 40.6 wt% Mn, 5.2 wt% Fe, and 7.9 Mn/Fe ratio at 150 m, and 10.3 wt% Mn, 19.0 wt% Fe, and 0.6 Mn/Fe ratio at 73 m. The chemical compositions of the nodules at 150 m are similar to those of nodules from the Peru Basin in the Pacific Ocean, while the compositions of the nodules at 73 m are similar to those of nodules from the Cook Islands or the Baltic Sea. The observed morphological and geochemical characteristics of the nodules show a clear difference at the two sites, which indicates that the aqueous conditions and formation processes of the nodules in the Arctic Sea vary with the water depths.

• Journal of Environmental Science International
• /
• v.29 no.11
• /
• pp.1125-1139
• /
• 2020

This study investigated the distributional pattern of meiobenthos associated with future deep-sea mining in the Korea Deep Ocean Study area present in the Clarion-Clipperton Fracture Zone (CCFZ) located in the southeastern part of the North Pacific Ocean. Standing stocks of meiobenthos were investigated in benthic impact experiment sites (BIS) and Korea Institute of Ocean Science & Technology long-term monitoring (KOMO) sites during the 2008-2014 annual field survey. A total of 14 taxa of meiobenthos were identified. Nematodes were the most abundant taxon (60-86%). Harpacticoid copepods (5-26%) and benthic foraminifera (1-12%) were also dominant at all sites. The total meiobenthic densities varied from 4 to 150 ind./10 cm2. The mean value of total meiobenthic abundance was higher at BIS than at KOMO sites, but there was no significant difference between the two sites. The mean values of the number of taxa and biomass at BIS and KOMO sites were similar. The mean abundance of nematodes that were the most dominant taxa was also higher at BIS than at KOMO sites. The standing stocks in our study sites were relatively lower than those previously reported at other CCFZ sites. These results seem to reflect a low organic concentration in the study area.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1305-1310
• /
• 2012

The performance of a system can be affected by the variance of noise factors, which arise owing to uncertainties of the material properties and environmental factors acting on the system. For robust design optimization of the system performance, it is necessary to minimize the effect of the variance of the noise factors that are impossible to control. However, present robust design techniques consider the variation of design factors, and not the noise factors, as being important. Furthermore, it is necessary to assume a normal distribution; however, a normal distribution is often not suitable to estimate the variations. In this study, a robust design technique is proposed to consider the variation of noise factors that are estimated as non-normal distributions in a real experiment. As an example of an engineering problem, a deep-sea manganese nodule miner tracked vehicle is used to demonstrate the feasibility of the proposed method.