• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.32.1-32.4
• /
• 2020

Background: Le Fort I osteotomy is a highly effective treatment for skeletal jaw deformities and is commonly performed. High Le Fort I osteotomy is a modified surgical procedure performed for improving the depression of the cheeks by setting the osteotomy higher than the conventional Le Fort I osteotomy. Developments in three-dimensional (3D) technology have popularized the use of 3D printers in various institutions, especially in orthognathic surgeries. In this study, we report a safe and inexpensive method of performing a high Le Fort I osteotomy using a novel 3D device and piezosurgery, which prevent tooth root injury without disturbing the operation field for patients with a short midface and long tooth roots. Results: A 17-year-old woman presented with facial asymmetry, mandibular protrusion, a short midface, and long tooth roots. We planned high Le Fort I osteotomy and bilateral sagittal split ramus osteotomy. Prevention of damage to the roots of the teeth and the infraorbital nerve and accurate determination of the posterior osteotomy line were crucial for clinical success. Le Fort I osteotomy using 3D devices has been reported previously but were particularly large in size for this case. Additionally, setting the fixing screw of the device was difficult, because of the risk of damage to the roots of the teeth. Therefore, a different surgical technique, other than the conventional Le Fort I osteotomy and 3D device, was required. The left and right parts of the 3D device were fabricated separately, to prevent any interference in the surgical field. Further, the 3D device was designed to accurately cover the bone surface from the piriform aperture to the infra-zygomatic crest with two fixation points (the anterior nasal spine and the piriform aperture), which ensured stabilization of the 3D device. The device is thin and does not interfere with the surgical field. Safe and accurate surgical performance is possible using this device and piezosurgery. The roots of the teeth and the infraorbital nerve were unharmed during the surgery. Conclusions: This device is considerably smaller than conventional devices and is a simple, low-cost, and efficient method for performing accurate high Le Fort I osteotomy.

• Archives of Plastic Surgery
• /
• 제45권6호
• /
• pp.495-503
• /
• 2018

With significant improvements in success rates for free flap reconstruction of the head and neck, attention has turned to donor site morbidity associated with osteocutaneous free flaps. In this review, we address the morbidity associated with harvest of the four most commonly used osteocutaneous flaps; the free fibula flap, the scapula flap, the iliac crest flap and the radial forearm flap. A comprehensive literature search was performed to identify articles relevant to donor site morbidity for these flaps. We assessed morbidity in terms of incidence of delayed healing, chronic pain, aesthetic outcomes, site specific complications and patient satisfaction/quality of life. Weighted means were calculated when sufficient studies were available for review. The radial forearm and free fibula flaps are associated with high rates of delayed healing of approximately 20% compared to the scapular (<10%) and iliac flaps (5%). The radial forearm flap has higher rates of chronic pain (16.7%) and dissatisfaction with scar appearance (33%). For the majority of these patients harvest of one of these four osteocutaneous does not limit daily function at long-term follow-up. The scapular osteocutaneous flap is associated with the lowest relative morbidity and should be strongly considered when the recipient defect allows. The radial forearm is associated with higher morbidity in terms of scarring, fractures, chronic pain and wrist function and should not be considered as first choice when other flap options are available.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권2호
• /
• pp.103-115
• /
• 2009

In vertebrates, the face is mainly formed with neural crest derived neural crest cells by the inherent programs and the interactive environmental factors. Extracellular signaling-regulated kinase (Erk) is one of such programs to regulate the various cellular functions. And retinoic acid (RA) also plays an important role as a regulator in differentiation process at various stages of vertebrate embryogenesis. We wanted to know that the segregation as well as the patterning of maxillary and mandibular structure is greatly influenced by the maxillomandibular cleft (MMC) and the failure of this development may result in the maxillomandibular fusion (syngnathia) or other patterning related disorder. It has been well documented that the epithelium at this cleft region has significant expression of Fibroblast growth factor (Fgf) 8, and it is essential for the patterning of the first arch derived structures. By the morphological, skeletal, cell proliferation and apoptotic, and hybridization analysis, we checked the effects of Erk inhibition and/or RA activation onto MMC and could observe that Erk and RA signaling is individually and synergically involved in the facial patterning in terms of FGF signaling pathway via Barx-l. So RA and Erk signaling work together for the MMC patterning and the segregation of maxilla-mandible by controlling the Fgf-related signaling pathways. And the abnormality in MMC brought by aberrant Fgf signaling may result in the disturbances of maxillary-mandibular segregation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권5호
• /
• pp.404-416
• /
• 2006

Purpose : This study was to clarify the changes in mandibular condyle after unilateral mandibular distraction osteogenesis throughout histological changes and expression of matrix metalloproteinase-2 (MMP-2) and tissue inhibitor of matrix metalloproteinase-2 (TIMP-2). Materials & Methods : Intraoral distractors were placed via submandibular incision in 8 dogs. Two unoperated animals served as controls. Distraction was performed five days after osteotomy as a rate of 0.5 mm twice per day for 10 days. Two animals were sacrificed on 7, 14, 28, and 56 days after completion of distraction, respectively. Ipsilateral condyles were harvested and processed for histological and immunohistochemical examinations. Results : The condyle cartilage is separated into four layers: fibrous layer, proliferative layer, hypertrophic layer, and calcified layer. At 7 days and 14 days after distraction, the condylar cartilage showed the decreased thickness of the articular cartilage and reduced cellularity. At 28 days after distraction, there was an increase in cellularity of fibrous, proliferative, and hypertrophic layer. However, it demonstrated reduced cellularity compared to the control. At 56 days of after distraction, the articular cartilage was an almost normal histologic structure. Positive Safranin-O staining, indicative of sulfated proteoglycans, was examined in the condylar cartilge of nonloaded control. At 7 days and 14 days after distraction, the sulfated proteoglycans is almost completely depleted from the noncalcified part of the condylar cartilage. At 28 days after distraction, there was an increase in Safranin-O staining intensity. However, the staining intensity of the experimental condyle was weaker than that of the control. At 56 days of after distraction, the condylar cartilage showed almost normal Safranin-O staining pattern. In control condyle, MMP-2 immunostaining was seen in fibrous, proliferative, and hypertrophic layer of condylar cartilage, however, it demonstrated lack of staining in fibrous and proliferative layer. At 7 days and 14 days after distraction, strong MMP-2 immunoreactivity was seen in the fibrous, proliferative and hypertrophic layer of the condylar cartilage. At 28 days after distraction, MMP-2 immunostaining was seen in the fibrous and hypertrophic layer of condylar cartilage, however, their immunoactivity was reduced. At 56 days after distraction, MMP-2 immunoreactivity showed almost normal immunostaining pattern. In control condyle, TIMP-2 immunostaining was primarily seen in fibrous and hypertrophic layer of condylar cartilage, however, it demonstrated lack of staining in proliferative layer. At 7 days after distraction, very weak TIMP-2 immunoreactivity appeared in fibrous, proliferative and hypertrophic layer of the condylar cartilage. At 14 days after distraction, weak TIMP-2 immunoreactivity was seen in the fibrous, proliferative and hypertrophic layer of the condylar cartilage. At 28 days after distraction, TIMP-2 immunoreactivity was increased in the fibrous and hypertrophic layer of condylar cartilage. At 56 days after completion of distraction, TIMP-2 immunoreactivity showed almost normal immunostaining pattern. Conclusions : The results show that short-term outcome of physiologic distraction osteogenesis may lead to degenerative changes in the condylar cartilage. These alterations in the condylar cartilage may be considered as a pressure-related degeneration of the cartilage tissue. However, the long-term results suggest that the condylar cartilage display repair activity after mandibular distraction osteogenesis.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권4호
• /
• pp.315-323
• /
• 2005

For reconstruction of the bony defect, distraction osteogenesis has many advantages in comparison with bone graft. However, it needs long consolidation period for sufficient bone maturity. This study is performed to evaluate the effect of PRP injection into the distracted mandible on bone formation in rabbits. Twelve house rabbits, weighing 2 kg, were used. All animals underwent bilateral mandibular osteotomy under general anesthesia. A internal distractor divice was positioned along a plane perpendicular to the line of osteotomy. After 5 days of latency period, distraction osteogenesis was started at a rate of 1 mm/day for 9 days which was distracted 9 mm totally. After completion of distraction, 0.5 ml of PRP which collected in rabbit blood was injected into the distracted mandible on experimental group, whereas no injection was done in control group. Macroscopical, radiographical, and histological, and histomorphometric examinations were performed 2, 4 and 8 weeks after distraction. All animals showed distracted mandible and severe anterior cross-bite. In radiographical findings 2 weeks after distraction, more radiopacity in the distracted gap was found in experimental group than that of control group. At 4 weeks after distraction, distracted bone was similar to normal bone in experimental group. In histological findings, 1) At 2 weeks after distraction, number of osteoblasts and angiogenesis in the distracted gap was found in experimental group than that of control group. 2) At 4 weeks after distraction, more active and distinct bone in the distracted gap was found in experimental group than that of control groups. 3) At 8 weeks after distraction, more dense and matured lamellated bone in the distracted gap was found in experimental group than that of control group. In histomorphometrical findings 8 weeks after distraction, more bone formation was observed in experimental group than control group (p<0.01). These results indicate that administration of PRP into the distracted mandible can promote bone formation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권5호
• /
• pp.407-416
• /
• 2008

Purpose: The aim of the present study is to evaluate the effect of repetitive distraction and compression on new bone formation during distraction period. Materials and methods: Sixteen healthy rabbits, weighing about 2.5kg, were used in this experiment. A unilateral mandibular osteotomy was performed in the left mandible and the distractor(Track 1 $plus^{(R)}$, Gebruder Martin $GmbH^{(R)}$, Germany) was fixed with four screws (Cross driver screw $TI^{(R)}$, Gebruder Martin $GmbH^{(R)}$, Germany). After 4 days, the mandibles were distracted at a rate of 0.6mm/day for 10 days to obtain the amount of 6mm distraction in the control group(n=4). In the experimental group A(n=6), they were distracted at a rate of 1.2mm/day for 5 days and then compression of 0.6mm length and distraction of 0.6mm per 12 hours were carried out as counter direction for 5 days, relatively. In the experimental group B(n=6), distraction of 1.2mm length and compression of 0.6mm length per 12 hours were repeated for 10 days to obtain the amount of 6mm distraction finally. The experimental animals were sacrificed at 2 and 4 weeks after surgery and block specimens were obtained. With histologic and histomorphometric analysis, we observed the histologic changes of the cells and bone formation after H-E and Masson- Trichrome staining and then, measured Bone Deposition Rate with TOMORO $ScopeEye^{TM}$ ver. 3.5(Olympus, Japan), Results: Histologically, new bone formation was examined in all experimental groups and the control. But, the ability of bone formation of the experimental group A was somewhat better than any other groups. On the histomorphometric analysis, Bone Deposition Rate was higher in the experimental group A$(50.67{\pm}4.36%)$ than in the control group$(45.94{\pm}3.97%)$ and in the experimental group B$(42.68{\pm}5.70%)$. These data showed significant differences statistically(p<0.05). Conclusion: These results show that the distraction osteogenesis using repetitive compression and distraction force in the early consolidation period may be effective for new bone formation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.27.1-27.9
• /
• 2019

Background: Implants are becoming the first choice of rehabilitation for tooth loss. Even though they have a high success rate, failures still occur for many reasons. The objective of this study is to analyze the reasons for recurring failure at the same site and the results of re-implantation. Methods: Thirteen patients (11 males and 2 females, mean age 60 ± 9.9 years) who experienced implant surgery failure at the same site (same tooth extraction area) two or more times in the Department of Oral and Maxillofacial Surgery, Seoul National University Bundang Hospital, between 2004 and 2017 were selected. The medical records on a type, sites, diameter, and length of implants; time and estimated cause of failure; and radiographs were reviewed. Data were collected and analyzed retrospectively, and the current statuses were evaluated. Results: A total of 14 implants experienced failure in the same site more than two times. Twelve implants were placed in the maxilla, while 2 implants were placed in the mandible. The maxillary molar area was the most common site of failure (57.1%), followed by the mandibular molar, anterior maxilla, and premolar areas (14.3% each). The first failure occurred most commonly after prosthetic treatment (35.7%) with an average period of failure of 3.8 months after loading. Ten cases were treated as immediate re-implantation, while the other 4 were delayed reimplantation after an average of 3.9 months. The second failure occurred most commonly after prosthetic treatment (42.9%), with an average of 31 months after loading; during the healing period (42.9%); and during the ongoing prosthetic period (14.3%). In 3 cases (21.4%), the treatment plan was altered to an implant bridge, while the other 11 cases underwent another implant placement procedure (78.6%). Finally, a total of 9 implants (64.3%) survived, with an average functioning period of 60 months. Conclusions: Implants can fail repeatedly at the same site due to overloading, infection, and other unspecified reasons. The age and sex of the patient and the location of implant placement seem to be associated with recurring failure. Type of implant, bone augmentation, and bone materials used are less relevant.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제37권
• /
• pp.34.1-34.14
• /
• 2015

Background: Over the past 30-40 years, various carbon implant materials have become more interesting, because they are well accepted by the biological environment. The traditional carbon-based polymers give rise to many complications. The polymer complication may be eliminated through carbon fibres bound by pyrocarbon (carbon/carbon). The aim of this study is to present the long-term clinical results of carbon/carbon implants, and the results of the scanning electron microscope and energy dispersive spectrometer investigation of an implant retrieved from the human body after 8 years. Methods: Mandibular reconstruction (8-10 years ago) was performed with pure (99.99 %) carbon implants in 16 patients (10 malignant tumours, 4 large cystic lesions and 2 augmentative processes). The long-term effect of the human body on the carbon/carbon implant was investigated by comparing the structure, the surface morphology and the composition of an implant retrieved after 8 years to a sterilized, but not implanted one. Results: Of the 16 patients, the implants had to be removed earlier in 5 patients because of the defect that arose on the oral mucosa above the carbon plates. During the long-term follow-up, plate fracture, loosening of the screws, infection or inflammations around the carbon/carbon implants were not observed. The thickness of the carbon fibres constituting the implants did not change during the 8-year period, the surface of the implant retrieved was covered with a thin surface layer not present on the unimplanted implant. The composition of this layer is identical to the composition of the underlying carbon fibres. Residual soft tissue penetrating the bulk material between the carbon fibre bunches was found on the retrieved implant indicating the importance of the surface morphology in tissue growth and adhering implants. Conclusions: The surface morphology and the structure were not changed after 8 years. The two main components of the implant retrieved from the human body are still carbon and oxygen, but the amount of oxygen is 3-4 times higher than on the surface of the reference implant, which can be attributed to the oxidative effect of the human body, consequently in the integration and biocompatibility of the implant. The clinical conclusion is that if the soft part cover is appropriate, the carbon implants are cosmetically and functionally more suitable than titanium plates.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제28권6호
• /
• pp.531-548
• /
• 2006

The purpose of this study was to investigate the biomechanical, histologic findings of distracted regenerate and TMJ response in modified distraction osteogenesis (DO) technique combined with compression force as biomechanical stimulation method which has been suggested in 2002, and developed thereafter by authors. This study was performed with two experiments. First experiment was designed to explore the optimal ratio of compression force versus distraction force for the new DO technique. Second experiment was planned to evaluate the reaction of TMJ tissue, especially condyle, disc after application of the DO technique with compression force. Total 52 New Zealand adult male-rabbits with 3.0kg body weight were used for the study. For the first study, 30 adult male-rabbits underwent osteotomy at one side of mandibular body and a external distraction device was applied on each rabbit with same manner. In the control group of 10 rabbits, final 8 mm of distraction with 1 mm rate per day was done with conventional DO technique after 5 latency days. For the experimental group of 20 rabbits, a compression force with 1 mm rate per day was added to the distracted mandible on 3-latency day after over-distraction (over-lengthening). As the amount of the rate of compression versus distraction, experimental subgroup I (10 rabbits) was set up as 2 mm compression versus 10 mm distraction (1/5) and experimental subgroup II (10 rabbits) was set up as 3 mm compression versus 11 mm distraction (about 1/3). All 30 rabbits were set up to obtain final 8 mm distraction and sacrificed on postoperative 55 day to analysis on biomechanical, and histologic findings of the bone regenerates. For second study, 22 adult male-rabbits were used to evaluate TMJ response after the DO method application with compression force. In the control group, 10 rabbits was used to be performed with conventional DO method, on the other hand, in a experimental group of 10 rabbits, 10 mm distraction with 2 mm compression (1/5 ratio) was done. The remaining 2 rabbits served as the normal control group. Histomorphologic examinations on both condyle, histological studies on condyle, disc were done at 1, 2, 3, 4, 7 weeks after distraction force application. The results were as follows: 1. On the bone density findings, the experimental group II (force ratio - 1/3) showed higher bone density than the other experimental group (force ratio - 1/5) and control group (control group - $0,2906\;g/cm^2$, experimental group I - $0.2961\;g/cm^2$, experimental group II - $0.3328\;g/cm^2$). 2. In the histologic findings, more rapid bone maturation like as wide lamellar bone site, more trabeculae formation was observed in two experimental groups compared to the conventional DO control group. 3. In morphologic findings of condyle, there were no differences of size and architecture in the condyle in the control and experimental groups. 4. In histologic findings of condyles, there were thicker fiberous and proliferative layers in experimental group than those of control group until 2 weeks after distraction with compression force. But, no differences were seen between two groups on 3, 4, 7 weeks after compression. 5. In histologic findings of disc, more collagen contents in extracellular matrix, more regular fiber bundles, and less elastin fibers were seen in experimental group than control group until 2 weeks after distraction with compression. But, no differences were seen between two groups on 3, 4, 7 weeks after distraction with compression. From this study, we could identify that the new distraction osteogenesis technique with compression stimulation might improve the quality of bone regeneration. The no remarkable differences on TMJ response between control and experimental groups were seen and TMJ tissues were recovered similarly to normal TMJ condition after 3 weeks.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권2호
• /
• pp.123-131
• /
• 2007

Introduction: Distraction osteogenesis is widely used as for bone lengthening in patients with maxillofacial deformity and alveolar bone atrophy. One of the major problems in distraction osteogenesis is long consolidation period for 2-3 months, in which the devices have to be fixed on the bone to prevent relapse. It results in scar formation on the face, disturbance of mastication and speech. This study was performed to evaluate the stimulating effect of pulsed electromagnetic field on the early bone consolidation in distraction osteogenesis. Materials and methods: Total 10 rabbit were used (5 for control group, 5 for experimental group). A vertical osteotomy in the mandibular body was performed and the distraction device was fixed. After 5 days distraction was done 1mm per a day for 7 days. A pulsed electromagnetic field (38 Gauss, 60 Hz) was applied for 8 hours per day and it continued for 5 days immediately after distraction in the experimental group. Both groups were sacrificed after 2 weeks. Histological specimens with H&E and Masson Trichrome staining were made and histomorphometrically analysed with image analyser. Results: The device for distraction osteogenesis was displaced in one animal for each group, therefore, only four animals in both groups were evaluated. In both groups, a new bone formation was observed in the distracted area after 2 weeks. The bone formation was enhanced in the experimental groups ($31.76{\pm}8.68%$) compared with control group ($9.94{\pm}3.23%$), its difference was statistically significant (p<0.001). Conclusion: This study suggests that electrical stimulation with electromagnectic field may be effective in the early bone formation after distraction osteogenesis. Further studies with large number of animals are needed before clinical application.