• Title/Summary/Keyword: Mandibular movements

Search Result 148, Processing Time 0.028 seconds

A Pantographic Study on the Mandibular Movements in Patients with Temporomandibular Joint Sounds (Pantograph를 이용한 악관절잡음자의 하악운동에 관한 연구)

  • Lee, Pung Ho;Han, Kyung Soo
    • Journal of Oral Medicine and Pain
    • /
    • v.12 no.1
    • /
    • pp.85-93
    • /
    • 1987
  • The author studied on the effect of TMJ sounds to the patterns and ranges of mandibular border movements in horizontal plane with Pantograph (Denar Corp.). For study, 19 patients with TMJ sounds only and 16 students with no TM disorder were selected and classified as experimental group and control group, respectively. The subject performed right lateral movement, left lateral movement, and forward movement. Each movement were performed 3 times and the movement trajectory obtained with mechanical pantograph were observed for accordance of centric relation position, reproducibility and/or restriction of lateral movement paths, deviation of protrusive path in anterior table, restriction of protrusive condylar movement path in posterior horizontal table, presence of Fisher angle in posterior vertical table. And pantographic reproducibility Index (PRI) were obtained with pantronic by the same movement method as in the mechanical pantograph record. The obtained results were as follows : 1. In experimental group, PRI scores in those who show accordance of centric relation position were 14.4, and were 26.53 in those who did not show accordance of centric relation position. However, the PRI scores of the two subgroups show no statistically significant difference in control group. Therefore, in experimental group, the capability of accordance of centric relation position affected largely the PRI scores than in control group. 2. Deviation of protrusive path was opposite to the affected side in experimental group, and was left side in control group. 3. Restriction side of condylar movement in protrusion was ipsilateral to the deviation side in experimental group, but in control group, restriction side was not related to the deviation side. 4. PRI scores in experimental group were 23.2 (moderate dysfunction category), and in control group, were 17.8 (slight dysfunction category). The PRI scores in control group, however, implies that the evaluation of temporomandibular disorders by the PRI scores only may be unreasonable.

  • PDF

Factor Affecting Mandibular Rotational Troque Movements (하악의 비틀림회전운동에 영향을 미치는 요인)

  • 이유미;한경수;허문일
    • Journal of Oral Medicine and Pain
    • /
    • v.23 no.2
    • /
    • pp.143-155
    • /
    • 1998
  • This study was performed to investigate the factor that might affect mandibualr body rotation. For the study, 115 patients with temporomandibular disorders and 35 dental students without angy signs and symptoms of temporomandibular disorders were randomly selected as the patient group and the contreol group, respectively. Preferred chewing side, Angle' classification, lateral guidance pattern, and affected side were clinically recorded, and the amount of Mandibular body rotational torque movement was measured in wide opening and closure, in right and left excursion with vertical and lateral distance in frontal plane, right and left rotational angel in horizontal and in frontal plane. Masticatory muscle activity of anteriorocclusal contact pattern on maximal hard biting were also observed synchronously with BioEMG and T-Scan , respectively. The observed items were muscle activity of anterior temporalis and superficial masseter, and tooth contact status related to contact number, force, duration, and occlusal unbalance between right and left arch. The data collected were analyzed by SAS statistical program. The results of this study were as follows : 1. Mean value of vertical distance in frontal plane in wide opening and closure was more in control subjects than in patients, but there was no difference for rotational angle. In right excursion, rotational angles were greater in patient group than in control group. 2. Comparison among the subjects by preferred chewing side did not reveal any significant difference, but comparison among patients by affected side showed more rotational amount in bilaterally affected patients than in unilaterally affected patients. 3. Comparison among the subjects by Angle's classification or lateral guidance pattern revealed no difference. There was also no difference between preferred chewing side and contralateral side, and between affected side and contralateral side. 4. Positive correlation in madibular rotational torque movements were observed among vertical distance, total horizontal rotation angle, electromyographic activity of anterior temporalis, tooth contact number, and tooth contact force but total frontal rotation angle almost did not show any correlation with other variables except vertical distance.

  • PDF

A COMPARATIVE STUDY OF THE EFFECT OF THE CR-CO DISCREPANCY ON THE MANDIBULAR MOVEMENTS (중심교합위와 중심위간의 변위가 하악운동에 미치는 영향에 관한 비교연구)

  • Lee, Ji-Hoon;Kim, Kwang-Nam;Chang, Ik-Tea
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.29 no.2
    • /
    • pp.295-317
    • /
    • 1991
  • The discrepancy between centric relation and centric occlusion have a great role on the successful prosthodontic and occlusal treatment. This study was performed to investigate the effect of the discrepancy between centric relation and centric occlusion on condylar guidance inclination and Bennett shift (immediate and progressive side shift). Sixteen adults who have physiologically normal occlusion and are free of TMJ dysfunction were selected. The amount of the sagittal CR-CO discrepancy in lower anterior incisor was obtained by Saphon Visi-Trainer. The amount of the CR-CO discrepancy in condylar level was measured on the individualized corrected tomography. Pantronic survey was performed by using a arbitrary hinge axis according to manufacturer's direction. All subjects were divided into two groups, group I (small) and group II (large), according to the amount of CR-CO discrepancy. At first the amount of the CR-CO discrepancy in condylar level between two groups was compared and then the condylar guidance inclination and Bennett shift between two groups were compared and analyzed. The results were as follows; 1. The average CR-CO discrepancy in lower anterior incisors was 0.7mm superoinferiorly, 0.49mm anteroposteriorly, and 0.88 mm in total. The average CR-CO discrepancy in condylar level was 0.43mm. 2. The CR-CO discrepancy measured on teeth level and condylar level were highly correlated (p<0.01). 3. The correlation of the condylar position in the glenoid fossa between two groups was not statistically significant. 4. The large CR-CO discrepancy group showed greater amount of Bennett shift and condylar guidance inclination, but there is no statistical significancy. 5. It seems that the CR-CO discrepancy have greater effect on progressive side shift than other elements of mandibular movements.

  • PDF

A simple technique for impression taking of teeth and functionally generated paths

  • Yamamoto, Takatsugu;Sato, Yohei;Watanabe, Hidehiko;Punj, Amit;Abe, Minoru;Momoi, Yasuko;Ohkubo, Chikahiro
    • Restorative Dentistry and Endodontics
    • /
    • v.43 no.1
    • /
    • pp.9.1-9.6
    • /
    • 2018
  • The objective of this case report is to introduce a simple technique for simultaneously taking a closed-mouth impression and functionally generated path (FGP) for a full coverage crown restoration. A monolithic zirconia crown was the restoration of choice. An alginate impression of the abutment tooth was taken to fabricate a custom-made closed-mouth impression tray covering the abutment tooth and the adjacent teeth. The tray had an FGP table and an abutment tray in cameo and intaglio surfaces, respectively. The impression was taken with silicone impression material after adjusting the abutment tray and inscribing the FGP using self-curing acrylic resins. Plaster casts were made from the impression, and a zirconia crown was fabricated. The crown was cemented to the abutment tooth with minimal adjustments. This simple technique resulted in a well-fitting crown that accounted for mandibular movements. Using the custom closed-mouth impression tray incorporating an FGP table simultaneously aids in fabricating an accurately fitting restoration that incorporates harmonious mandibular movements using a single impression capture.

Long-term Evaluation of Conervative Treatment for the Patients with TMJ Closed Lock (악관절 폐구성 과두걸림의 보존적 치료에 대한 장기적 평가)

  • Mi-Suk Seo;Jae-Kap Choi
    • Journal of Oral Medicine and Pain
    • /
    • v.19 no.1
    • /
    • pp.93-103
    • /
    • 1994
  • In order to evaluate thelong-term results of conservative treatment on TMJ closed lock, a follow-up study of thirst-two patients was performed 2 to 7 year after treatment. Evaluating method included the questionnaire, clinical examination, transcranial radiograph and mandibular kinesiography. The results were as follows : Seventy-eight percents of patients reported that symptoms were reduced completely or considerably. Recurrent headache was improved after treatment (72 percents of success rate). There was a significant decrease in VAS after treatment and at follow-up comparing with that of before treatment(p<0.01). Most common variable of Helkimo's clinical dysfunction index at follow-up was impared TMJ function. There was a significant decrease in Fricton's craniomandibular index and dysfunction index(p<0.01) Mean interincisal distance was increased by 14.07mm after treatment and was also increased at follow-up by 2.80mm comparing with that of after treatment(p<0.01). Before treatment, condylar translation measurements of affected and non-affected sides on the transcranial radiograph were 4.89±3.20mm and 9.09±3.73mm respectively and at follow- up examination, those were 14.98±4.77 and 17.05±4.35mm respectively. At follow-up, condylar translation were increased significantly comparing with those of before treatment(p<0.01). In 93.1% of patients, the condylar position of affected side at maximum mouth opening was behind the articular eminence before treatment but the percentage was decreased to 13.8% at follow-up(p<0.01). The pattern and range of mandibular movements at follow-up examination were similar to the typical normal movements. And in 16 cases showing lateral deviation of opening path, the deviation was directed to the affected and non-affected sides with the same frequency.

  • PDF

Retrospective study of changes in pharyngeal airway space and position of hyoid bone after mandibular setback surgery by cephalometric analysis

  • Cho, Hyun-Woo;Kim, Il-Kyu;Cho, Hyun-Young;Seo, Ji-Hoon;Lee, Dong-Hwan;Park, Seung-Hoon
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.37
    • /
    • pp.38.1-38.6
    • /
    • 2015
  • Background: The posterior movement of mandible was known as the main cause of the changes in the pharyngeal airway space (PAS) and the postoperative obstructive sleep apnea (OSA). The purpose of this study was to know the changes of PAS and position of hyoid bone. Methods: Lateral cephalographies of 13 patients who had undergone sagittal split ramus osteotomy (SSRO) setback surgery were taken preoperatively (T1), postoperatively within 2 months (T2), and follow-up after 6 months or more (T3). On the basis of F-H plane, diameters of nasopharynx, oropharynx, and hypopharynx were measured. The movements of the soft palate, tongue, and hyoid bone were also measured. Results: The amount of mandible setback was $7.5{\pm}3.8mm$. In the measurements of PAS, there was a statistically significant decrease of $2.8{\pm}2.5mm$ in nasopharynx (P < 0.01), and $1.7{\pm}2.4mm$ in oropharynx (P < 0.01) were observed after surgery. The hypopharynx decreased $1.0{\pm}2.1mm$ after surgery and continuously decreased $1.0{\pm}2.8mm$ at follow-up. The changes in hyoid bone position showed the posterior movement only after surgery and posteroinferior movement at follow-up. Conclusions: The PAS such as nasopharynx, oropharynx, and hypopharynx showed relatively high correlation with the amount of mandibular setback. The change of resistance in upper airway may be important for the prevention of OSA after mandibular setback surgery.

Clinicoradiologic evaluation of styloid process calcification

  • Bagga, Mun Bhawni;Kumar, C. Anand;Yeluri, Garima
    • Imaging Science in Dentistry
    • /
    • v.42 no.3
    • /
    • pp.155-161
    • /
    • 2012
  • Purpose: This study was performed to investigate the prevalence, morphology, and calcification pattern of the elongated styloid process in the Mathura population and its relation to gender, age, and mandibular movements. Materials and Methods: The study analyzed digital panoramic radiographs of 2,706 adults. The elongated styloid process was classified with the radiographic appearance based on the morphology and calcification pattern. The limits of mandibular protrusion were evaluated for each subject. The data were analyzed by using a Student's t-test and chi-squared test with significance set at p=0.05. Results: Bilateral elongation having an "elongated" type styloid process with a "partially mineralized" pattern was the most frequent type of styloid process. No correlation was found between styloid process type and calcification pattern on the one hand and gender on the other, although elongated styloid was more prevalent in older and male populations (p<0.05). Further styloid process elongation showed no effect on mandibular protrusive movement (p>0.05). Conclusion: Dentists should recognize the existence of morphological variation in elongated styloid process or Eagle syndrome apparent on panoramic radiographs. We found higher prevalence of elongated styloid process in the population of the Mathura region when compared with other Indian populations. The calcification of the styloid process was more common in the older age group with no correlation to gender, mandibular movement and site. "Type I" with a "partially calcified" styloid process was observed more frequently in the population studied.

Full mouth rehabilitation in edentulous patient with unstable mandibular position using flat table treatment dentures and CAD-CAM technology (치료의치와 CAD-CAM 기술을 이용한 불안정한 하악위를 가진 완전 무치악 환자의 치료 증례)

  • Kim, Yuyeon;Lee, Younghoo;Hong, Seoung-Jin;Paek, Janghyun;Noh, Kwantae;Kim, Hyeong-Seob;Kwon, Kung-Rock;Pae, Ahran
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.60 no.4
    • /
    • pp.330-338
    • /
    • 2022
  • For edentulous patients with unstable mandibular movements and abnormal facial features due to condylar fractures and morphological abnormalities, it is important to find a stable mandibular position. In this case, the patient's facial improvement, mandibular movement stability, and denture stability were improved by using flat table treatment dentures. In addition, computer-aided design/manufacturing (CAD-CAM) technology was used in denture fabrication to maintain the vertical dimension and lip support of flat table treatment dentures, we report good results in improving the patient's discomfort.

Radiographic and computed tomography monitoring of a fractured needle fragment in the mandibular branch

  • Villalobos, Maria Isabel de Oliveira e Britto;Leite, Thaisa Cristina Gomes Ferreira;Barra, Samila Goncalves;Werneche, Daniela Teresa Pinto da Cunha;Manzi, Flavio Ricardo;Cardoso, Claudia Assuncao e Alves
    • Imaging Science in Dentistry
    • /
    • v.47 no.1
    • /
    • pp.63-68
    • /
    • 2017
  • Some complications can arise with the usage of local anesthesia for dental procedures, including the fracture of needles in the patient. This is a rare incident, usually caused by the patient's sudden movements during anesthetic block. Its complications are not common, but can include pain, trismus, inflammation in the region, difficulty in swallowing, and migration of the object, which is the least common but has the ability to cause more serious damage to the patient. This report describes a case in which, after the fracture of the anesthetic needle used during alveolar nerve block for exodontia of the left mandibular third molar, the fragment moved significantly in the first 2 months, before stabilizing after the third month of radiographic monitoring.

Clinical application of neutral zone and stereographic record in complete denture (Neutral Zone 개념과 Stereographic Record를 이용한 총의치 제작)

  • Lee, Joung-Min;Yi, Yang-Jin;Cho, Lee-Ra
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.17 no.2
    • /
    • pp.113-123
    • /
    • 2001
  • The success of complete denture prosthesis is to satisfy three basic requirements for the edentulous patient : maximum comfort, efficiency, and esthetic appearance. This can be achieved only if the dentures are both stable and retentive. When the residual alveolar ridge has resorbed significantly, stability and retention are more dependent on the correct position of the teeth and external surfaces of the denture. The stability and retention of the denture can be improved by locating the denture in the neutral zone and reproducing exact mandibular border movement for balanced occlusion. The neutral zone philosophy is based upon the concept that there exists a specific area where the musculature function will not unseat the denture in the mouth. In here, forces generated by the tongue are neutralized by the forces generated by the lips and cheeks. One of the simplest methods for recording border movements in three dimensions is to make stereographic record of condylar movement. Stereographs are made in the mouth during mandibular movement with intraoral clutches and central bearing point, and used in dictating the condylar movement on the articulator later by generating the condylar paths in doughy acrylic resin. Its procedure is simpler and more convenient than that of Pantograph. In this clinical report, we introduce the concept of neutral zone and stereograph in complete denture fabrication.

  • PDF