• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.175-179
• /
• 2001

Regional odontodysplasia is a relatively rare condition in which both enamel and dentin are hypoplastic and hypocalcified. The result is localized arrest in tooth development. The etiology of regional odontodysplasia is uncertain, but, disturbance in vascular supply, somatic mutation, latent virus infection, trauma, hyperpyrexia, irradiation, nutrition, metabolic disorders and hereditary transmission are supported to be etiologic factors. Females are more often affected than males. (1.4 : 1). The maxillary arch is more often affected than the mandibular arch with the maxillary left quadrant being the most commonly involved. Affected teeth are hypoplastic, typically discolored yellow or yellowish brown, smaller in size and display a variety of surface marking including pitting and grooving. Radiographically, the teeth affected have been described to have a "ghost like" appearance or "fuzzy" appearance. Pulp calcification and denticles may be present within the pulp chambers of the affected teeth. In it's case, a 2 years old male visited for a treatment of uneruption of lower right teeth. Partial eruption of lower right deciduous central incisor and unerupted deciduous lateral incisor, deciduous canine and deciduous first molar showed severly delayed eruption state. On radiographic appearance, "Ghost like appearance", shortened root and opened apexes on lower right region were observed. It was suspected regional odontodysplasia with clinical and radiographic condition.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.355-362
• /
• 2001

Data derived from odontometric studies are useful in many areas. Especially crown diameter of primary teeth is important in not only anthropology but also clinical dentistry. The purposes of this study were to compare diameters of primary molars of Korean children with those of preformed stainless steel crown, and examine racial characteristics of primary molars of Korean children. The mesiodistal and buccolingual diameters of primary molars were measured on dental casts taken from 235 children(male 105, female 131), with digital calipers. And the data were compared with those of preformed stainless steel crowns. The results were as follows; 1. No significant difference was observed between the right and left members of antimeric teeth and all primary molars of male were larger than those of female. 2. The diameters of primary molars of Korean are smaller than those of Austrailian aborigines and there was significant difference between diameters of primary molars of Korean and those of other populations. 3. There were size differences between diameters of maxillary, mandibular first molar and preformed stainless steel crown than other primary molars, relatively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.4
• /
• pp.544-561
• /
• 2005

Purpose : This study was to assess the loading distributing characteristics of implant systems with internal connection or external connection under vertical and inclined loading using finite element analysis. Materials and methods : Two finite element models were designed according to type of internal connection or external connection The crown for mandibular first molar was made using cemented abutment. Each three-dimensional finite element model was created with the physical properties of the implant and surrounding bone This study simulated loads of 200N at the central fossa in a vertical direction (loading condition A), 200N at the centric cusp tip in a 15$^{\circ}$ inward inclined direction (loading condition B), or 200N at the centric cusp tip in a 30$^{\circ}$ outward inclined direction (loading condition C) respectively. Von Mises stresses were recorded and compared in the supporting bone, fixture, abutment and abutment screw. Results : 1. In comparison with the whole stress or the model 1 and model 2, the stress pattern was shown through th contact of the abutment and the implant fixture in the model 1, while the stress pattern was shown through the abutment screw mainly in the model 2. 2. Without regard to the loading condition, greater stress was taken at the cortical bone, and lower stress was taken at the cancellous bone. The stress taken at the cortical bone was greater at the model 1 than at the model 2, but the stress taken at the cortical bone was much less than the stress taken at the abutment, the implant fixture, and the abutment screw in case of both model 1 and model 2. 3. Without regard to the loading condition, the stress pattern of the abutment was greater at the model 1 than at the model 2. 4. In comparison with the stress distribution of model 1 and model 2, the maximum stress was taken at the abutment in the model 1. while the maximum stress was taken at the abutment screw in the model 2. 5. The magnitude of the maximum stress taken at the supporting bone, the implant fixture, the abutment, and the abutment screw was greater in the order of loading condition A, B and C. Conclusion : The stress distribution pattern of the internal connection system was mostly distributed widely to the lower part along the inner surface of the implant fixture contacting the abutment core through its contact portion because of the intimate contact of the abutment and the implant fixture and so the less stress was taken at the abutment screw, while the abutment screw can be the weakest portion clinically because the greater stress was taken at the abutment screw in case of the external connection system, and therefore the further clinical study about this problem is needed.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.4
• /
• pp.240-249
• /
• 2020

Objectives: Although the side effects of radiation therapy vary from mucositis to osteomyelitis depending on the dose of radiation therapy, to date, an experimental animal model has not yet been proposed. The aim of this study was to develop an animal model for assessing complications of irradiated bone, especially to quantify the dose of radiation needed to develop a rat model. Materials and Methods: Sixteen Sprague-Dawley rats aged seven weeks with a mean weight of 267.59 g were used. Atraumatic extraction of a right mandibular first molar was performed. At one week after the extraction, the rats were randomized into four groups and received a single dose of external radiation administered to the right lower jaw at a level of 14, 16, 18, or 20 Gy, respectively. Clinical alopecia with body weight changes were compared and bony volumetric analysis with micro-computed tomography (CT), histologic analysis with H&E were performed. Results: The progression of the skin alopecia was different depending on the irradiation dose. Micro-CT parameters including bone volume, bone volume/tissue volume, bone mineral density, and trabecular spaces, showed no significant differences. The progression of osteoradionecrosis (ORN) along with that of inflammation, fibrosis, and bone resorption, was found with increased osteoclast or fibrosis in the radiated group. As the radiation dose increases, osteoclast numbers begin to decrease and osteoclast tends to increase. Osteoclasts respond more sensitively to the radiation dose, and osteoblasts are degraded at doses above 18 Gy. Conclusion: A standardized animal model clinically comparable to ORN of the jaw is a valuable tool that can be used to examine the pathophysiology of the disease and trial any potential treatment modalities. We present a methodology for the use of an experimental rat model that incorporates a guideline regarding radiation dose.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.1
• /
• pp.105-119
• /
• 2005

Statement of problem. As the effects of the various diameters of fixture and abutment screw on stress distribution was not yet examined, this study focused on the different design of single implant restoration using three dimensional finite element analysis. Purpose. This study was to compare five different fixture-abutment combinations for single implant supported restorations with different fixture and abutment screw diameters. Material of methods. The five kinds of finite element models were designed by 3 diameter fixtures ($\oslash$3.3, 3.75, 5.0 mm) with 3 different abutment screws $\oslash$1.5, 1.7, 2.0 mm). The crown for mandibular first molar was made using UCLA abutment according to Wheeler's anatomy. 244 N was applied at the central fossa with two different loading directions, vertically and obliquely (30$^{\circ}$) and at the buccal cusp vertically. Maximum von Mises stresses were recorded and compared in the supporting bone, crowns, fixtures, and abutment screws. Results. 1. The stresses in supporting bone and implant-abutment structure under oblique loading were greater than those under vertical or offset loading. The stresses under vertical loading were the least among 3 loading conditions regardless of the implant and abutment screw diameters. 2. The stresses in the narrow implants were greater than the wider implants. The narrow implant with narrow abutment screw showed highest stresses in the lingual crest, but the narrow implant with standard abutment screw showed highest stress in abutment screw. 3. The stresses of abutment screws were influenced by the diameter of fixtures and loading conditions. The wide implants showed least difference between two different abutment screw diameters. Conclusions. The wide implants showed lesser stresses than the narrow implants and affected least by the different abutment screw diameters. The narrow implants with standard abutment screw showed highest stresses in the lingual bony crest under oblique loading.

• Journal of Periodontal and Implant Science
• /
• v.38 no.sup2
• /
• pp.373-384
• /
• 2008

Purpose: The aim of this study is to compare the healing response of various Hydroxyapatite(HA) coated dental implants by Ion-Beam Assisted Deposition(IBAD) placed in the surgically created circumferential gap in dogs. Materials and methods: In four mongrel dogs, all mandibular premolars and the first molar were extracted. After an 8 weeks healing period, six submerged type implants were placed and the circumferential cylindrical 2mm coronal defects around the implants were made surgically with customized step drills. Groups were divided into six groups : anodized surface, anodized surface with 150nm HA and heat treatment, anodized surface with 300nm HA and heat treatment, anodized surface with 150nm HA and no heat treatment, and anodized surface with 150nm HA, heat treatment and bone graft, anodized surface with bone graft. The dogs were sacrificed following 12 weeks healing period. Specimens were analyzed histologically and histomorphometrically. Results: During the healing period, healing was uneventful and implants were well maintained. Anodized surface with HA coating and $430^{\circ}C$ heat treatment showed an improved regenerative characteristics. Most of the gaps were filled with newly regenerated bone. The implant surface was covered with bone layer as base for intensive bone formation and remodeling. In case that graft the alloplastic material to the gaps, most of the coronal gaps were filled with newly formed bone and remaining graft particles. The bone-implant contact and bone density parameters showed similar results with the histological findings. The bone graft group presented the best bone-implant contact value which had statistical significance. Conclusion: Within the scope of this study, nano-scale HA coated dental implants appeared to have significant effect on the development of new bone formation. And additional bone graft is an effective method in overcoming the gaps around the implants.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.3
• /
• pp.224-235
• /
• 2013

A passively fitting prosthesis is an essential prerequisite to attain long-lasting success and maintenance of osseointegration. However, true "passive fit" can not be achieved with the present implant-supported prosthesis fabrication protocol. Many clinical situations are suitably treated with cantilevered implant-supported fixed restorations. The purpose of this study was to compare the stress distribution pattern and magnitude in supporting tissues around ITI implants with cantilevered, implant-supported, screw-retained fixed prosthesis according to the fitness of superstructures. Photoelastic model was made with PL-2 resin (Measurements, Raleigh, USA) and three ITI implants (${\phi}4.1{\times}10mm$) were placed in the mandibular posterior edentulous area distal to the canine. Anterior and posterior extended 4-unit cantilevered FPDs were made with different misfit in the superstructures. 4 types of prosthesis were made by placing a $100{\mu}m$ gap between the abutment and the crown on the second premolar and/or the first molar. Photoelastic stress analysis were carried out to measure the fringe order around the implant supporting structure under simulated loading conditions (30 lb).

• The korean journal of orthodontics
• /
• v.32 no.1 s.90
• /
• pp.1-7
• /
• 2002

The purposes of this study were to observe the compensation pattern of human female adults with openbite tendency and to provide the decision criteria of the diagnosis and treatment planning for those patients. Fifty patients with anterior openbite and fifty-five Patients without anterior openbite patients were selected as a control and a test group. ODI of the all patients was below 66. Mean ages of the control and the test group were 23.88 ${\pm}$ 4.53 and 24.7 ${\pm}$ 6.20 years, respectively. Lateral cephalograms were taken and forty-one variables were measured. To identify the morphological differences between the groups, statistical analyses were performed. Statistically significant differences were found in the measured variables of lower face height, N-Me, ANS-Me, ANS-Me/N-Me ratio, Mx1-SN, Mx1-FH, Mx1-NA(mm), Mx1-APo, PP to Mx6, Mn1-NB(degree), Mn1-NB(mm). The test group showed decreased lower face height, N-Me, ANS-Me, ANS-Me/N-Me ratio, more uprighted and retruded maxillo-mandibular incisors. Overeruption of the maxillary first molar was found in the control group.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.12 no.2
• /
• pp.87-91
• /
• 2016

Pierre Robin syndrome (PRS) is characterized by the triad of congenital mandibular hypoplasia, glossoptosis and cleft palate. Infant PRS patients are frequently suffering from upper airway obstruction, gastroesophageal reflux and growth retardation caused by above mentioned problems. We report a dental caries treatment of 3-year old girl with Pierre Robin syndrome with multiple caries. The cause of multiple caries was mainly presumed as patient's eating habit caused by her general condition. She had some feeding problems and had history of gastric tube. She was still using milk bottle and took more than an hour to finish a meal. The treatment was performed under general anesthesia considering patient's condition; mild autism, poor cooperation and respiratory problem due to micrognathia. Severely affected upper incisors were treated with pulp treatment and restored with zirconia crown for esthetic purpose. Lower incisors were treated with pulp treatment and restored with composite resin. Upper right first primary molar was restored with stainless steel crown and other primary molars were treated with composite resin. There were no postoperative complications. According to her parents, the patient's compliance to oral hygiene management was greatly improved after the treatment since she was very pleased with the esthetic result and highly motivated by her looks. The treatment without sedation or general anesthesia would be possible once the airway is improved as the mandible grows.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.317-324
• /
• 2008

The objective of this study was to test effects of (1) where the occlusal contact points locate on a full veneer crown, and (2) which direction the contact forces are directed to, on the stresses within the luting cement layer that might suffer microfracture. A total of 27 finite element models were created for a mandibular first molar, combining 9 different locations of the occlusal contact points and 3 different loading directions. Type 3 gold alloy was used for crown material with a chamfer margin, and the luting cement material was glass ionomer cements in uniform thickness of $75{\mu}m$. Modeled crowns were loaded at 100 N. Different patterns in the cement stress were observed in the vicinity of the buccal and lingual margins. Whereas, the peak stress in buccal margin occurred approximately 0.5 mm away from the external surface, the highest stress in lingual margin was observed at approximately 1 mm. Significantly different distribution of stresses was recorded as a function either of the location of the occlusal contact points or of the loading direction. Higher stresses were produced by more obliquely acting load, and when the loaded point was in the vicinity of the cusp tip.