• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.6
• /
• pp.466-472
• /
• 2012

The loss of mandibular continuity due to trauma, neoplasm, or infection results in major esthetic and biologic compromise. The reconstruction of the mandibular bone defect still poses a challenge to oral and maxillofacial surgeons. There have been a number of variety graft materials. Among them, free block bone graft with rigid fixation has been widely used. However, cases using free block bone grafts may lead to a marked invasion of the donor site, mal-union, and absorption of the block bone. In this respect, particulate cortical bone using a titanium mesh tray can be an effective alternative option in order to achieve a proper bone contour and good oral rehabilitation. We have developed an intraoral approach for the mandibular reconstruction method using a titanium mesh tray with autogenous particulate cortical bone graft.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.39
• /
• pp.21.1-21.6
• /
• 2017

Background: The purposes of the present study were to compare implant stabilities of mandibular block bone graft and bovine bone graft and to evaluate influencing factors for implant stability in mandibular block bone (MBB) graft. Methods: This retrospective study investigated 1224 cases and 389 patients treated by one surgeon in the Department of Oral and Maxillofacial Surgery of Pusan National University Dental Hospital (Yangsan, Korea) between January 2010 and December 2014. Proportions that MBB graft cases constitute in all implant restoration cases and in all bone graft cases were measured. Implant stability quotient (ISQ) values were achieved by the same surgeon before loading. The average ISQ values of the experimental groups were compared. In addition, ISQ values of influencing factors, such as age, sex, implant size, and implant placement site, were compared within the MBB group using $Osstell^{TM}$ Mentor ($Osstell^{(R)}$, $G{\ddot{o}}teborg$, Sweden). Paired t test and ANOVA were conducted for statistical analysis with a significance level of 0.05. Results: Fifty-five percent of all implant restoration cases performed bone graft while MBB cases constituted 34% of all implant restoration cases and 61% of all bone graft cases. Comparing ISQ values according to bone graft materials, the MBB group manifested sufficient implant stability by presenting comparable ISQ value to that of the experimental group without bone graft. Among the reviewed factors, females, mandibular molar regions, and implants in larger diameter displayed greater implant stabilities. Conclusions: Satisfactory implant stability was accomplished upon administration of MBB graft. Within the limitation of this study, gender, implant site, and implant diameter were speculated to influence on implant stability in MBB graft.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.3
• /
• pp.276-281
• /
• 2010

The maxillary posterior area is the most challenging site for the dental implant. After missing of teeth on maxillary posterior area due to periodontal problems, the remaining alveolar ridge is usually very thin because of not only pneumatization of maxillary sinus but also destruction of alveolar bone. The maxillary sinus bone graft procedure is one of the most predictable and successful treatments for the rehabilitation of atrophic and pneumatized endentulous posterior maxilla. But, in case of severe destruction of alveolar bone due to periodontal problems, very long crown length is still remaining problem after successful sinus graft procedures. We performed vertical augmentation of maxillary posterior alveolar ridge using mandibular ramal block bone graft with simultaneous sinus graft. After this procedures, we could get more favorable crown-implant ratio of final prosthodontic appliance and more satisfactory results on biomechanics. This is a preliminary report of the vertical augmentation of maxillary posterior alveolar ridge using mandibular ramal block bone graft with simultaneous sinus graft, so requires more long-term follow up and further studies.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.1
• /
• pp.55-59
• /
• 2013

In the oral and maxillofacial area, bone defects are created by various reasons and demand for bone grafts, while dental implant implantation has been increased consistently. To solve these problems, there has been development of autogenous tooth-bone graft material (AutoBT$^{(R)}$, Korea Tooth Bank Co., Korea), and we have collected ground reasons to substitute free autobone graft with this material in clinical use. This autogenous tooth-bone graft material is produced in powder type and block type. Block type is useful in esthetic reconstruction of the defect site and vertical and horizontal augmentation of alveolar bone because this type has high strength value, well maintained shape and is less absorbed. Therefore, the author of this study gained favorable result by grafting the block type autogenous tooth-bone graft material after dental implant implantation on the bone defects of the mandibular molar extraction site. Moreover, the author represents this case with literature review after confirming bone remodeling on the computed tomography image and by histological analysis.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.41 no.5
• /
• pp.232-239
• /
• 2015

Objectives: The purpose of this study was to estimate the volumetric change of augmented autobone harvested from mandibular body cortical bone, using cone-beam computed tomography (CBCT) and three-dimensional reconstruction. In addition, the clinical success of dental implants placed 4 to 6 months after bone grafting was also evaluated. Materials and Methods: Ninety-five patients (48 men and 47 women) aged 19 to 72 years were included in this study. A total of 128 graft sites were evaluated. The graft sites were divided into three parts: anterior and both posterior regions of one jaw. All patients included in the study were scheduled for an onlay graft and implantation using a two-stage procedure. The dental implants were inserted 4 to 6 months after the bone graft. Volumetric stability was evaluated by serial CBCT images. Results: No major complications were observed for the donor sites. A total of 128 block bones were used to augment severely resorbed alveolar bone. Only 1 of the 128 bone grafts was resorbed by more than half, and that was due to infection. In total, the average amount of residual grafted bone after resorption at the recipient sites was $74.6%{\pm}8.4%$. Conclusion: Volumetric stability of mandibular body autogenous block grafts is predictable. The procedure is satisfactory for patients who want dental implants regardless of atrophic alveolar bone.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.28 no.2
• /
• pp.64-73
• /
• 2019

Various techniques have been developed, and the development of piezo electric devices have made it possible to widen the alveolar ridge even if the residual bone is dense or if there is a lack of cancellous bone between the cortical bones. In the operation of the mandibular posterior area, the flap is easily accessible to the ramus bone, from which high quality autogenous bone can be obtained, compared to other parts. A small autologous bone block can be used with particulated bone graft material using one screw for bone regeneration instead of a large autologous bone with two screws. The tapered implant design can minimize buccal bone fracture, even in severely atrophic mandibular areas. We report a case of 4 years following implant placement with ridge splitting and small autogenous bone graft in severly atrophic mandible. This report demonstrates a case of functional and aesthetic restoration in a patient through a collaboration.

• 대한치주과학회:학술대회논문집
• /
• 2002.05a
• /
• pp.13-13
• /
• 2002

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.6
• /
• pp.666-671
• /
• 2000

Objectives: This study evaluated the availability of mandibular symphysis corticocancellous block grafts in patients treated for reconstruction of intraoral jaw defects. Materials & Methods: 8 patients with mandibular and maxillary bony defects were treated with corticocancellous block of symphysis. The types of defects included 4 pathologic jaw defects and 4 vertical and/or horizontal alveolar deficiencies. The age ranged from 13 to 45 years. Additional treatments such as plate fixation, alloplastic bony substitutes, and/or barrier membrane application were perfomred. They were evaluated for complications and healing of defects. Follow-up period ranged from 6 to 15 months. Results: 2 patients experienced complications such as wound dehiscence and mild resorption of exposed bone. None of the patients needed secondary operation. Paresthesia of lip, chin, and teeth were recovered completely by 6 months postoperatively. Reconstructed wound showed favorable healing and bony consolidation. Conclusion: Corticocancellous block of mandibular symphysis can be used for the reconstruction of a variety of intraoral local jaw defects selectively. Advantages were easy fixation of graft, possibility of restoration of original alveolar contour, and decreased donor site morbidity.

• Journal of Periodontal and Implant Science
• /
• v.53 no.6
• /
• pp.406-416
• /
• 2023

Purpose: No evidence exists regarding the advantages of periodontal regeneration treatment for furcation defects using soft block bone substitutes. Therefore, this randomized controlled trial aimed to assess the clinical and radiographic outcomes of regenerative therapy using porcine-derived soft block bone substitutes (DPBM-C, test group) compared with porcine-derived particulate bone substitutes (DPBM, control group) for the treatment of severe class II furcation defects in the mandibular molar regions. Methods: Thirty-five enrolled patients (test group, n=17; control group, n=18) were available for a 12-month follow-up assessment. Clinical (probing pocket depth [PPD] and clinical attachment level [CAL]) and radiographic (vertical furcation defect; VFD) parameters were evaluated at baseline and 6 and 12 months after regenerative treatment. Early postoperative discomfort (severity and duration of pain and swelling) and wound healing outcomes (dehiscence, suppuration, abscess formation, and swelling) were also assessed 2 weeks after surgery. Results: For both treatment modalities, significant improvements in PPD, CAL, and VFD were found in the test group (PPD reduction of 4.1±3.0 mm, CAL gain of 4.4±2.9 mm, and VFD reduction of 4.1±2.5 mm) and control group (PPD reduction of 2.7±2.0 mm, CAL gain of 2.0±2.8 mm, and VFD reduction of 2.4±2.5 mm) 12 months after the regenerative treatment of furcation defects (P<0.05). However, no statistically significant differences were found in any of the measured clinical and radiographic parameters, and no significant differences were observed in any early postoperative discomfort and wound healing outcomes between the 2 groups. Conclusions: Similar to DPBM, DPBM-C showed favorable clinical and radiographic outcomes for periodontal regeneration of severe class II furcation defects in a 12-month follow-up period.

• Journal of Periodontal and Implant Science
• /
• v.42 no.2
• /
• pp.50-58
• /
• 2012

Purpose: This study evaluated histologically the tissue responses to and the effects of a customized nano-hydroxyapatite (n-HA) block bone graft on periodontal regeneration in a one-wall periodontal-defect model. Methods: A customized block bone for filling in the standardized periodontal defect was fabricated from prefabricated n-HA powders and a polymeric sponge. Bilateral $4{\times}{\times}4{\times}5$ mm (buccolingual width${\times}$mesiodistal width${\times}$depth), one-wall, critical-size intrabony periodontal defects were surgically created at the mandibular second and fourth premolars of five Beagle dogs. In each dog, one defect was filled with block-type HA and the other served as a sham-surgery control. The animals were sacrificed following an 8-week healing interval for clinical and histological evaluations. Results: Although the sites that received an n-HA block showed minimal bone formation, the n-HA block was maintained within the defect with its original hexahedral shape. In addition, only a limited inflammatory reaction was observed at sites that received an n-HA block, which might have been due to the high stability of the customized block bone. Conclusions: In the limitation of this study, customized n-HA block could provide a space for periodontal tissue engineering, with minimal inflammation.