• Journal of the Korean Society for information Management
• /
• v.12 no.2
• /
• pp.37-61
• /
• 1995

The purpose of this paper is to make a careful study on the characterization of information science and to describe the scientific basis for the revitalization. At first, various theoretic models in initial stage and later tendency of infor mation science are analyzed and evaluated. After that the dilemma and nature of information science as a postmodem science are investigated. Upon the results of these analysis and investigation, the new reference points of information science are presented from the strategic, theory-immanant, and methodological aspects.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2000.05a
• /
• pp.327-327
• /
• 2000

In the 1990's several economically important marine fisheries collapsed or showed signs of extreme hardship owing to overcapitalization and excessive fishing pressure on the resources. Public concern was raised and demands voiced for more prudent fishery management practices. The United Nations responded and developed international guidelines, such as the FAO Code of Conduct for Responsible Fishing and the UN Straddling Fish Socks and Highly Migratory Fish Stocks Agreement These guidelines task fishery managers to take prudent steps to ensure the long-term viability of fisheries and fishery resources. Included in the guidelines are two particular demands that will challenge stock assessment scientists in the new millennium. They are application of the precautionary approach and the inclusion of ecological considerations in assessments and management advice. High-lighted in the presentation are examples from the central-western Pacifi skipjack tuna fishery and the eastern Pacific thresher shark fishery where insufficien information is affecting stock assessments. The shortcomings are further linked t the new challenges of applying the precautionary approach, such as reference points, and ecological considerations, such as predator-prey and oceanographic-regime shift.(omitted)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.1 no.1
• /
• pp.83-90
• /
• 2000

DEA is a newly developed analyzing tool to measure efficiency evaluation of decision making units (DMU). It compares DMU by radial Projection on the efficient frontier. The purpose of this study is to show reference point approach used for searching solution in multiple objective linear Programming can be usefully used to determine flexible efficient frontier of each DMU In reference point approach, the minimization of ASF Produces an efficient points in frontier and enhances the usefulness of DEA by Providing flexibility in DEA and optimally allocating resources to DMU. Various DEA models can be supported by reference point method by changing the projection direction in order to choose the targets units, standards costs and management benching-marking.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.spc4_2
• /
• pp.375-386
• /
• 2014

This research inquired problems that appeared in the previous boundary point coordinates record book, boundary point cover record book, and ground boundary point record book. Also, we suggested the framing plan and based on the boundary point record book for the registration and management of boundary point of cadastral resurvey upon completion on record book. In fact, the outlines of result could be organized into three following points; Firstly, a quick survey can be possible, as reference points for the present situation were available to be checked right away due to unify and manage the boundary point at the record book, even if at the field without the location explanation drawings of boundary points. Secondly, continuous managing of boundary points is possible, since recording the boundary points book with a parcel boundary point, as a unit, make it easily monitoring the formation, critical situation, and extinction of boundary point. Thirdly, the boundary point could be maintained at the boundary points at location, coinciding with geographic features by requesting boundary changes at the time of completion, although it has been made at when the location explanation drawing is made.

• Fashion & Textile Research Journal
• /
• v.25 no.2
• /
• pp.248-254
• /
• 2023

This study aims to measure the skin rigidity of different facial areas among Koreans and propose guidelines for each area's skin rigidity that can be applied with a facial robot for testing respiratory protective devices. The facial skin rigidity of 40 participants, which included 20 men and 20 women, aged 20 to 50, was analyzed. The rigidity measurement was conducted in 13 facial areas, including six areas in contact with the mask and seven non-contact areas, by referring to the facial measurement guidelines of Size Korea. The facial rigidity was measured using the Durometer RX-1600-OO while in a supine position. The measurement procedure involved contacting the durometer vertically with the reference point, repeating the measurement of the same area five times, and using the average of three values whose variability was between 0.4 and 4.2 Shore OO. The rigidity data analysis used precision analysis, descriptive statistics analysis, and mixed-effect ANOVA. The analysis confirmed the rigidity of the 13 measurement areas, with the highest rigidity of the face being at the nose and forehead points, with values of 51.2 and 50.8, respectively, and the lowest rigidity being at the chin and center of the cheek points, with values of 19.2 and 20.7, respectively. Significant differences between gender groups were observed in four areas: the tip of the nose, the point below the chin, the area below the lower jaw, and the inner concha.

• Geomechanics and Engineering
• /
• v.22 no.4
• /
• pp.291-303
• /
• 2020

The deformation of the rock surrounding a tunnel manifests due to the stress redistribution within the surrounding rock. By observing the deformation of the surrounding rock, we can not only determine the stability of the surrounding rock and supporting structure but also predict the future state of the surrounding rock. In this paper, we used grey system theory to analyse the factors that affect the deformation of the rock surrounding a tunnel. The results show that the 5 main influencing factors are longitudinal wave velocity, tunnel burial depth, groundwater development, surrounding rock support type and construction management level. Furthermore, we used seismic prospecting data, preliminary survey data and excavated section monitoring data to establish a neural network learning model to predict the total amount of deformation of the surrounding rock during tunnel collapse. Subsequently, the probability of a change in deformation in each predicted section was obtained by using a Bayesian method for detecting change points. Finally, through an analysis of the distribution of the change probability and a comparison with the actual situation, we deduced the survey mark at which collapse would most likely occur. Surface collapse suddenly occurred when the tunnel was excavated to this predicted distance. This work further proved that the Bayesian method can accurately detect change points for risk evaluation, enhancing the accuracy of tunnel collapse forecasting. This research provides a reference and a guide for future research on the probability analysis of tunnel collapse.

• The Journal of Engineering Geology
• /
• v.26 no.2
• /
• pp.197-205
• /
• 2016

Rainfall-induced landslide disaster case histories are typically required to establish critical lines based on the decrease coefficient for judging the likelihood of slope collapse or failure; however, reliably setting critical lines is difficult because the number of nationwide disaster case histories is insufficient and not well distributed across the region. In this study, we propose a method for setting the critical area to judge the risk of slope collapse without disaster case history information. Past 10 years rainfall data based on decrease coefficient are plotted as points, and a reference line is established by connecting the outermost points. When realtime working rainfall cross the reference line, warning system is operating and this system can be utilized nationwide through setting of reference line for each AWS (Automatic Weather Station). Warnings were effectively predicted at 10 of the sites, and warnings could have been issued 30 min prior to the landslide movement at eight of the sites. These results indicate a reliability of about 67%. To more fully utilize this model, it is necessary to establish nationwide rainfall databases and conduct further studies to develop regional critical areas for landslide disaster prevention.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.193-194
• /
• 1998

This paper describes a multi-functional EEG (electroencephalogram) software. The software manages the patient's EEG data systematically and analyzes the signal and display the parameters on a PC monitor in real-time. Since the software provides various parameters simultaneously, user can observe patients multilaterally. Reference patterns of CSA and DSA can be captured and displayed on top of the monitor. And user can mark events of surgical operation or patient's conditions, so it is possible to jump to the points of events directly, when reviewing the recorded file afterwards. Many convenient functions are equipped and these are operated by mouse clicks.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.1
• /
• pp.22-32
• /
• 2023

PURPOSE. Digital technology has enabled improvements in the fitting accuracy of denture bases via milling techniques. The aim of this study was to evaluate the trueness and precision of digital and analog techniques for manufacturing complete dentures (CDs). MATERIALS AND METHODS. Sixty identical CDs were manufactured using different production protocols. Digital and analog technologies were compared using the reference geometric approach, and the Δ-error values of eight areas of interest (AOI) were calculated. For each AOI, a precise number of measurement points was selected according to sensitivity analyses to compare the Δ-error of trueness and precision between the original model and manufactured prosthesis. Three types of statistical analysis were performed: to calculate the intergroup cumulative difference among the three protocols, the intergroup among the AOIs, and the intragroup difference among AOIs. RESULTS. There was a statistically significant difference between the dentures made using the oversize process and injection molding process (P < .001), but no significant difference between the other two manufacturing methods (P = .1227). There was also a statistically significant difference between the dentures made using the monolithic process and the other two processes for all AOIs (P = .0061), but there was no significant difference between the other two processes (P = 1). Within each group, significant differences among the AOIs were observed. CONCLUSION. The monolithic process yielded better results, in terms of accuracy (trueness and precision), than the other groups, although all three processes led to dentures with Δ-error values well within the clinical tolerance limit.

• Journal of the Korean Society for information Management
• /
• v.12 no.2
• /
• pp.9-35
• /
• 1995

Locating function of a particular item is more of added entry than a main entry heading. This function was expanded especially in the machine readable cataloging by introducing the control number and standard bibliographic number. Assembling function of the main entry heading is on a level with that of cross reference and notes, added entries, uniform headings. Links among all variant forms of a heading in hypercatalog will be made for collocating of all publications of a given author. The link of bibliographic records in this catalog can be freed from the dependence on standardized heading form. The function of the catalog is not affected even though by abandoning the concept of main entry heading. Further efforts should be made to raise users' finding opportunities through expansion of acces points and linking devices among related records.