• 대한원격탐사학회지
• /
• 제23권5호
• /
• pp.473-481
• /
• 2007

Joint Forest Management(JFM) is a concept of developing partnerships between fringe forest user groups and the Forest Department(FD) on the basis of mutual trust and jointly defined roles and responsibilities with regard to forest protection and development. In India, JFM was started during 1992 and it was implemented in many states. However success rate of JFM activity was not promising. Though there are many factors attributed to the failures, one of the main factors is the JFM site. This paper deals with the significant ground works to be done before planning for JFM using recent technologies such as remote sensing(RS) and Geographic Information System(GIS). Also it deals with the advantages of weighted overlay analysis in selecting suitable sites for JFM taking into consideration the various criteria. As a result of weighted overlay analysis, there were four types of suitability classes viz., less, moderate, highly and un-suitable. The moderately suitable class occupied maximum area(13209.64 ha) than less and highly suitable classes. If JFM is implemented on the suitability area, then the failure could be avoided in the future.

• 교육녹색환경연구
• /
• 제9권3호
• /
• pp.1-11
• /
• 2010

In the construction industry, IT based information system has been diversely applied to increase productivity. Although IT device such as PDA, RFID, Barcode, wireless network and web camera has been introduced to gather information in construction site, the effect of the IT device is limited, because of bringing about additional works of engineer. In this paper, we proposed a defect management system which is based on handwritten document digitalization framework for introducing applicability of new IT device, digital pen. By the proposed system, we can effectively gather and input defect information to defect management system by using digital pen and paper like conventional way. Applying the data gathering device, digital pen to defect management, it is able to increase productivity by improving work process, building up and utilizing defect information database of good quality.

• 한국건축시공학회지
• /
• 제9권2호
• /
• pp.31-38
• /
• 2009

In today's construction industry, buildings have been more complicated and higher, the demands of steel works have been increasingly concerned, which makes the schedule planning and management more significant. However, in actual construction sites, management is more based on a manager's construction experience than productivity data accumulated in previous projects. Moreover, most of the existing studies also featured a theoretical approach rather than an analysis of data straightforwardly collected in sites. In this study, a steel-erection site was visited to collect productivity data. The study found that there were significant disparities between aboveground work productivity and underground work; one tower crane operated work and two tower crane operated; and work productivity conducted in clear weather condition, cloud and rainy. However, the productivities of 'first node on ground' and 'second node on ground' were estimated similar. The productivity data collected and factors affecting the productivity will help managers to plan and control their similar steel-erection works. This study will also be beneficial for those performing related studies.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.146-152
• /
• 2017

Recently, countries in the South-east Asia are making efforts to enhance the construction industry system and introduce the construction management system. However, it is challenging to apply construction management in site due to lack of technology and professionals for CM. This can result in frequent safety accidents, cost overrun, schedule delay, etc. Therefore, it is necessary to carry out a clear evaluation of the overall situation regarding the level of technology and required competency. The objective of this research is to investigate on which management skills and items for CM are required to improve the construction management skills in South-east Asian construction industry. As a result of the questionnaire, most of the officials selected that the design phase and the construction phase are important works, and the engineers evaluated activities during the bidding phase, the design phase and the construction phase as important works for construction management. However, in most of the results, it was observed that the current competency of Vietnam construction is insufficient compared to the evaluated importance of the skills. This can be explained by the fact that they are not capable of managing construction projects effectively as compared to the importance. The results can help to realize the inadequate aspects of local construction industry, which will be the basis of improvements. Also, it is expected to be supportive to improve construction management in the countries and also provide indicators related to work stage or technology that should be acknowledged when establishing the advancing strategy for Southeast Asian countries in the future.

• Journal of Information Technology Applications and Management
• /
• 제20권3_spc호
• /
• pp.315-331
• /
• 2013

As the business has been highly informatized, many companies has bought the software for their works. There are two types of software license. One is a site license and the other is a user license. This paper is focused on the user license. User license has the number of the right to use software. So, software managers always need to know the number of licenses in use and should limit the number of software license in use. If someone in the company use a software without license, he will be treated as a piracy. In that case, the company should pay for the settlement cost for the exceeding license use. In this paper, we suggest the model how we can limit the installation of the software within the number of licenses by license management system.

• 대한안전경영과학회지
• /
• 제18권4호
• /
• pp.131-137
• /
• 2016

In unlimited competition era changed rapidly, productivity improvement and raw cost reduction by working improvement are very important for the survival of middle and small-sized companies. At this moment, middle and small-sized companies are cleary important in domestic industry. Therefore, this researcher applied TPS(Toyota production system) 7 wastes by experiment planning method for wastes of lots of working processes at the manufacturing site of automobile assembly manufacturing company, D company, analyzed current system of D company applied so as to verify if value creation works and factors were minimized during the production and drew results by analyzing experimental planning for analyzing waste elimination.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.138-141
• /
• 2015

The South Korean construction industry has shown a high proportion of industrial accidents (approximately 28% of whole injuries) and the continuously increasing accident rate. Although many safety research emphasized that the 3E (Enforcement, Education, and Engineering) approach is a potential solution to enhance workplace safety, there should be benefits to consider psychological (i.e., Emotional) effects on the safety performance since most construction works are human-oriented. Thus, understanding construction workers' psychological conditions can be a priority. This research studied the relationships between psychological conditions-which cover stress, personal temperament, emotional disturbance, and drinking habit-and specific safety-related factors including safety motivation and knowledge, and safety performance of individual workers at a construction site. This study conducted a survey of 430 respondents and analyzed the data with the multiple linear regressions. The results imply persistence, trait anxiety, and problem-focused coping style are the critical factors that should be controlled for enhancing jobsite safety. Finally, the research outcomes could be applied to build a strategic safety management plan for a construction manager.

• 토지주택연구
• /
• 제10권3호
• /
• pp.67-75
• /
• 2019

The modular construction means that more than 70% of the parts such as walls, windows, electrical wiring, facility piping, bathrooms, and kitchen appliances are pre-assembled at the factory and transported to the site. It is possible to shorten the construction period than general construction work and to secure high quality through modular mass production since the modular construction works in the field at the same time as the modular production. However, there are only four domestic modular manufacturers, and each company's modular components and construction methods are different, so it is necessary to standardize them. Therefore, this study investigated the construction process centering on the stacking method of modular housing construction work applied to D site in Cheonan-si, and proposed the key points of quality management by construction stage. As the project was conducted as a pilot project for government R&D projects, some differences may occur from general modular housing construction. However, the construction process and quality control focus of each unit box type modular house analyzed in this study can be used as basic data in the future of modular housing construction. In addition, the results of this study can be used to establish construction standards, such as the development of checklists and establishment of standard processes.

• 대한안전경영과학회지
• /
• 제18권2호
• /
• pp.37-46
• /
• 2016

Due to increased demand for remodeling and repair in construction market in recent year, the usage of horse scaffold is increasing in the indoor finish works. Injuries related horse scaffold are mainly caused by poor installation or of careless handling of scaffold. Approximately 300 workers are injuried at construction site every year, it is accounting for about 1.5% of the total construction sector and has increased on a year-to-year trends. But the main contents between national standards and speccifications related to the manufacture and usage of horse scaffolds are mutually inconsistent, In particular, the rules on occupational safety and health standards are the basis for the prevention of industrial injuries, there is no explicit application being made to the horse scaffold commonly used on construction sites. The purpose of this study was to analye the manufacture and usage situations in order to reduce construction injuries that occur at the horse scaffolds. It will be utilized the results of the analysis as the basis data for unifying the major domestic standards and specifications associated with the manufacture and usage of horse scaffold.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.229-230
• /
• 2022

According to the national building status, there are a total of 2.89 million buildings that are over 30 years old after completion, and the number is increasing by more than 70,000 to 80,000 buildings every year. As a result, the demand for demolition works is also increasing, and more than 3 to 4 collapse accidents occur steadily every year during demolition work. Major causes of accidents include non-compliance with plans, negligence of on-site supervisors, and failure to secure structural safety. Due to the strengthening of the Severe Disaster Punishment Act, there is growing interest in the demand for secure management of collapse detection during demolition works. Therefore, this study aims to investigate the applicability of real-time safety monitoring systems using a total station capable of 3D automatic displacement measurement in building demolition work for securing structural safety by the load changes during the demolition process.