• Title/Summary/Keyword: Malodorous substances

Search Result 11, Processing Time 0.03 seconds

A Study on Installation of Treatment Equipment of Malodorous Substances using the $O_3$ (오존($O_3$)을 이용한 악취물질 처리시설의 적용사례 연구)

  • 김석택
    • Journal of environmental and Sanitary engineering
    • /
    • v.15 no.3
    • /
    • pp.70-74
    • /
    • 2000
  • The technology of malodorous substances treatment was classified physical separation and chemical destruction. This study was carried out to investigate the characteristics of malodorous substances treatment with the change of operating conditions from the ozone generator. The major results of this study were as follows : Removal efficiency by additive ozone rate was measured $NH_3$:95%(ozone additive rate : 2), $H_2S$ : 97%(ozone additive rate:4), $CH_3SH$ : 96%(ozone additive rate : 3), $(CH_3)_2S_2$ : 97%(ozone additive rate:5), $(CH_3)_3N$ : 95%(ozone additive rate : 1), $CH_3CHO$ : 95%(ozone additive rate : 2), $C_6H_5CHCH_2$ : 95%(ozone additive rate : 2).

  • PDF

Removal Effect of malodorous Substances of Piggery Wastes by Air Injection Method (공기주입에 따른 양돈분뇨중 악취제거 특성 연구)

  • 고현준;김명중;신경섭;양진모;이명규
    • Journal of Animal Environmental Science
    • /
    • v.3 no.2
    • /
    • pp.115-123
    • /
    • 1997
  • This study was conducted to investigate the removal effect of malodorous substances of piggery wastes by air injection. With 7% of TS weight of artificial piggery wastes, this study focused on the changes of the concentration of VFAs, H2S during treatment period of 14 days. As a results of this study, air injection volume for removal of malodorants in this study was 150$m\ell$ / min$.$l$.$Under this condition, we found the concentrations of VFAs, H2S, NH3 have very high relationship with the pH, ORP, BOD, {{{{ { NH}`_{4 } ^{+ } }}-N. Especially, the concentration of Volatile Fatty Acids, one of most offensive odorants and one of BOD compounds were depended on ORP which can be controled by air injection in artificial piggery wastes.

Effect of Dietary Ceramic Powder on Laying Performance, Pathogenic Bacterial Count in Caecal Content and Excreta, Malodorous Substances in Excreta and Fatty Acid composition or Egg Yolk in Laying Hens (Ceramic 분말의 첨가가 산란계의 생산성, 맹장 및 배설물중 병원성 미생물의 수, 배설물충의 악취물질 및 난황중 지방산 조성에 미치는 영향)

  • Son J. H.
    • Korean Journal of Poultry Science
    • /
    • v.32 no.4
    • /
    • pp.261-268
    • /
    • 2005
  • The purpose of this study was to evaluate the effect of dietary ceramic powder on laying performance, Pathogenic bacterial (E. coli, salmonella) counts in caecal contents and excreta, malodorous substances $(NH_3,\;H_2S,\;VFA)$ in excreta and fatty acid composition of e99 yolk in laying hens. Three hundred sixty layers at 34 weeks of age were divided into three groups of 120 hens each and each group was fed diets containing 0 (control), 0.4, or 0.8 ceramic powder for six weeks. It is concluded that $0.4\%$ ceramic powder supplementation of diets decreased of E. coli, salmonella counts in the intestine and emission of $NH_3$ and VFA gas from excreta, and improved the laying Performance and ratio of egg yolk fatty acids contents.

Odor Removal Characteristics of Biofilters in Domestic Sewage Treatment Facilities Analyzing Composite Odor and Odor Quotient (복합악취와 악취농도지수 분석을 통한 국내 하수처리시설 바이오필터의 악취제거 특성)

  • Ko, Byung-Churl;Park, Young-Ho;Kim, Dong-Il;Lee, Min-Gyu;Kam, Sang-Kyu
    • Journal of Environmental Science International
    • /
    • v.22 no.1
    • /
    • pp.109-117
    • /
    • 2013
  • The removal characteristics of composite odor and malodorous substances using 33 biofilters in sewage treatment facilities were investigated. The geometry mean values of composite odor and odor quotient were reduced by 52.7% and 59.2% at the outlet of the biofilters, respectively. The removal efficiencies of the biofiltes for the composite odor and odor quotient show a significant difference statistically(p=0.000<0.05). The median value of odor quotient of sulfur compounds was reduced by 69.1% at the outlet of the biofilter and the odor quotient of the sulfur compound at the inlet and outlet of the biofilter shows a significant difference statistically(p=0.000<0.05); on the other hand, those of the $NH_3$ and trimethylamine, aldehydes, VOCs and alcohols, organic acids do not.

Prediction of Malodorous Landfill Substances Effect on Ambient Air Quality - A Case Study on Cheongju·Cheongwon Metropolitan Landfill - (매립지 악취가 주변 대기질에 미치는 영향 예측 - 청주청원 광역매립지 사례연구 -)

  • Lee, Sang-Woo
    • Journal of Environmental Impact Assessment
    • /
    • v.21 no.5
    • /
    • pp.695-705
    • /
    • 2012
  • The purpose of this study is to investigate concentration level and characteristics of malodour substances generated from landfill site in C city. Also, it is tried to predict distribution of concentration level using ISCST3 model around landfill site. From the results, it can be confirmed that twelfth-class malodour substances such as ammonia, methyl mercaptan, hydrogen sulfide, dimethyl sulfate, dimethyl disulfate, toluene, acetaldehyde, styrene, propionaldehyde, butylaldehyde, n-Valeraldehyde, xylene were generated from landfill site. The levels of the malodour substances were lower than that of permeable concentration regulated by odor control law in Korea. However, the concentration of malodour substances including methyl mercaptan, hydrogen sulfide, acetaldehyde, and propionaldehyde exceeded threshold limit value(TLV). It was seemed that these substances caused the problem of offensive odor around circumstance of landfill. The concentration of malodour substances was higher in slant than in upper part of landfill. The concentrations of malodour substances measured at night time were shown higher level than those at night time because atmospheric condition was stable at night time. It showed that the concentration of malodour substances were higher in spring. The results of atmospheric diffusion model predicted that tolerance limit level of hydrogen sulfide and methyl mercaptan was detected within nearly 5km from the boundary of landfill.

Application of Analytical Instrument Method for Determining Level of Malodorous Sulfur Compounds. (악취성분중 황화합물에 대한 기기분석법의 적용)

  • 유병태;최종욱;조기찬;이충언;김건흥
    • Journal of environmental and Sanitary engineering
    • /
    • v.14 no.4
    • /
    • pp.117-123
    • /
    • 1999
  • The analytical instrument method was applied to analyze malodorous sulfur compounds emitted from industrial fields. Six factories and two sites which release malodorous substances into ambient air were selected to determine the level of hydrogen sulfide($H_2S$), methylmercaptan(MeSH), dimethyl sulfide($Me_2S$), and dimethyl disulfide($Me_2S_2$) using automated thermal desorption system (STD400) and GC-FPD in summer and fall seasons of 1999. The Air sampler for ATD400 uses a small pump to draw sample and a mass flow controller to adjust sample amount without using a dilution apparatus. The trap temperature of ATD400 reached to $-80^{\circ}$ by supplying liquid nitrogen and $H_2S$ can be analyzed under this condition. The recovery rates of $H_2S$, MeSH, $Me_2S$, and $Me_2S_2$ of odorous sulfur compounds standard were shown 98.2%, 93.6%, 98.2%, 99.4% respectively. The concentrations of $Me_2S$ at outside boundary of G market, L factory, and J factory were 0.018ppm, 0.021ppm, 0.032ppm in summer, respectively. The concentration of $H_2S$ at Nanjido landfill was 1.167ppm in summer, but that of $H_2S$ was not detected in fall because of soil covering. The concentration of H2S and $Me_2S_2$ at inside of Chonggye stream were 0.564ppm and 1.045ppm in summer, while those of H2S and Me2S2 were 0.285ppm and 0.465ppm in fall, respectively.

  • PDF

Clinical evaluation of cetylpyridinium chloride-containing mouthwash in halitosis

  • Kang, Minkyung;Kim, Boyeon;Park, Hyounggeun;Lee, Eunseok
    • International Journal of Oral Biology
    • /
    • v.44 no.1
    • /
    • pp.27-29
    • /
    • 2019
  • Halitosis is a very common disease that affects the majority of the population and is characterized by unpleasant odor during expiration. Anaerobic bacteria produce a range of malodorous substances including volatile sulfur compounds. To reduce oral malodor, the amount of oral microorganisms should be managed through brushing, scraping, and use of antibacterial agents. In this study, a mouthwash containing 0.05% cetylpyridinium chloride was tested on 22 candidates with oral malodor for two weeks to confirm oral malodor reduction through the use of antibacterial mouthwashes. Volatile sulfur compound measurements were significantly lower after using the mouthwash than before using it; thus, the mouthwash effectively reduced oral malodor.

Investigation on the Management of Livestock Wastes and VOCs Concentration of Farms in Daejeon Area (대전광역시 양축농가의 축분뇨 관리 실태 및 VOCs 농도 조사)

  • Lee, Bong-Duk;Lee, Soo-Kee;Oh, Hong-Rok;Heo, Jung-Min;Jung, Kie-Chul;Kim, Sung-Bok
    • Korean Journal of Agricultural Science
    • /
    • v.32 no.1
    • /
    • pp.43-51
    • /
    • 2005
  • This study was carried out to investigate the style of livestock house, concentration of malodorous substances of livestock feces and livestock houses in Daejeon area. Among the livestock houses investigated, as most of cow pens(94.5%) have sawdust or chaff on the bottom, there was no leakage of feces out of pen. Most pig pens adopted slury style, but some of them currently use buffering material on the bottom. It is thought that there will be no possible contamination leakage. When it comes to hen house, all the broiler house use litters on the bottom and all the layer house use scrapper. It is also thought that there will be no possible contamination leakage. 3 out of 12 deer pens used buffering material on the bottom, 10 places were maintained in a traditional method, and 7 places left possibility of contamination leakage considering whether the roof was installed or not. The contents of ammonia, amine and volatile fatty acid in fresh feces were lower compared to rotten feces, but the concentration of sulfur-containing matter - hydrogen sulfide, methylmercapthan and ethylmercapthan were higher compared to rotten feces. In the case of malodorous ingredient in livestock houses, only small amount of ammonia and hydrogen sulfide were detected in pig pen and hen house, and other ingredients were not detectable. And those who are engaged in animal husbandry reacted negatively to the use of feed additives for decreasing malodor. In conclusion, it is not worrisome that contamination can be leaked out of animal raising facilities. But if we take into consideration that the point of investigation time is wintry season, there should be more considerate attitude. And feed additives for decreasing malodor need establishing criteria in the manufacturing process.

  • PDF

Performance Evaluation of Manhole Filter to Remove Odor Inside Sewage Pipe -Focused on Removal of Hydrogen sulfide- (하수관거 악취 제거를 위한 맨홀필터 악취제거장치 성능 평가 - 황화수소 제거를 중심으로 -)

  • Kim, Choong-Gon;Lee, Jang-Hown
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.26 no.4
    • /
    • pp.45-51
    • /
    • 2018
  • The objective of this study is to evaluate the applicability of a manhole-filter odor eliminator that is installed on a manhole to remove hydrogen sulfide ($H_2S$) contained in the sewage of urban streets; $H_2S$ is the very cause of offensive odor from such sewage. An analysis of the capability of impregnated activated carbon, which is contained in the manhole filter, to adsorb hydrogen sulfide shows that some 99.8% of hydrogen sulfide can be removed. A performance evaluation of the manhole-filter odor eliminator, which was made on Manhole Section 4 known as the representative malodorous manhole section of Seoul, Korea, indicates that more than 97% of hydrogen sulfide ($H_2S$), one of typical malodor-generating substances, can be eliminated. The results and findings of the study as described above suggest that the applicability of the manhole-filter odor eliminator to eliminate offensive odor generated from sewer manholes is satisfactory.

Olfactory Sensitivity Characteristics of Odors from Injection Molding Processing (사출성형 공정에서 유발되는 냄새의 후각 감성 특성)

  • Ryu, Young-Jae;Kim, Bo-Seong;Lee, Ye-Hyun;Kwak, Seung-Hyun;Seo, Sang-Hyeok;Ryu, Tae-Beum;Min, Byung-Chan
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.39 no.4
    • /
    • pp.67-71
    • /
    • 2016
  • The purpose of this study was to explore olfactory sensitivity of odors from injection molding processing. To do this, the experiment was carried out in an injection molding factory, and participants were exposed to the environment where odor-substances (Formaldehyde, Benzene, Toluene, Ethylbenzene, Xylene, Styrene) exist. In addition, we used the subjective scale using semantic adjectives as an olfactory sensitivity. As a result, the assessment structure of olfactory sensitivity was composed of eight factors (irritant, thermal, tense, unique, like-dislike, active, stable, masculine), and the main factor which was irritant characteristics explained 20% of the total olfactory sensibility. These results suggested that odors from injection molding processing would cause more negative emotional responses than the flavor which is mainly used in olfactory sensitivity. This study, as a basic study of the improvement in a factory environment for the efficiency of work, has limits in that it was conducted to the extent of identifying the olfactory sensitivity structure of those who were at a laboratory and who were exposed to the environment of odor substance induced in the injection molding processing. Therefore, for the method of removing malodorous substance, the effect of materials which can neutralize it, and the comparison of a direct performance in the environment where negative sensitivity structure exists, a series of studies which aim to improve the environment of injection molding factories, such as performance assessment in the environment of a factory and an office need to be conducted. It is expected that when these studies are put together, the improvement guidelines will be provided as a type that can maximize the effectiveness of work in the factory environment where injection molding processing is done.