• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.819-822
• /
• 1998

The high complexity of digital circuits has changed the digital circuits design mehtods from schemeatic-based to hardware description languages like VHDL, verilog that make hardware faults become more hard to detect. Thus test generation to detect hardware defects is very important part of the design. But most of the test generation methods are gate-level based. In this paper new high-level test generation method to detect stuck-at-faults on gate level is described. This test generation method is independent of synthesis results and reduce the time and efforts for test generation.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2001.11a
• /
• pp.58-63
• /
• 2001

Recently, it has been often reported that recycling of wasted glasses should be a great topic in related business circles. For the environmental reasons, a public institution are looking fur the ways of recycling these waste glasses. Consequently, the purpose of this research is to recycle crushed and powdered waste glasses by substituting for the cement in mortar and concrete. First of all, the optimum replacement ratio of Powdered Waste Glasses(PWG) can be obtained from the pilot test results. Secondary, we make advances in recycling of waste glasses as recycled to make secondary concrete products. So, we manufactured concrete brick and block contained powdered waste glasses by through mortar pilot test.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.3
• /
• pp.109-113
• /
• 2011

This study is suggest the test system for BIM(Building Information Modeling) qualification. And this study is the field-based BIM educational program with the acquisition of the qualifying certificates. Since field-based BIM and Curriculum(of University and Junior College) are highly linked to the actual practical affairs, the learning connected to the practical affairs out of the teaching focused on BIM modeling would satisfy students, and it would make the acquisition of the certificates which determinate the capability of the practical affairs. Thus teachers should guide students to get the certificates thoroughly, make them understand the importance of the acquisition of the certificates.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.8
• /
• pp.625-631
• /
• 2009

In this thesis, lateral thermosonic bonding with ACFs was investigated as a process to make high reliability joints for FPD fabrication. Conditions for thermosonic and thermocompression bonding with ACFs were determined and used to make specimens in a driving test jig for testing of bond reliability by thermal shock. The results showed that thermosonic bonding temperature of $199\;^{\circ}C$ and bonding time of 1s produced bonds with good reliability. Additionally, thermosonic bonding temperature and time were reduced and thermal shock test results compared to this proposed curing condition. It is concluded that theromosonic bonding with ACFs can be effectively applied to reduce bonding temperature and time compared with that of thermocompression bonding.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.748-756
• /
• 2005

The Purpose of this writing is a presentation of small turbine efficiency measuring method, applicable new technology, and several analysis result for real turbine. Measurement methods of hydraulic efficiency written in here are extracted from small turbine applicable international code(IEC, ASME). It includes brief synopsis of 'Current meter method' and 4 other methods and ASFM as a new small turbine applicable technology. And several analysis of test result are for recently performed domestic small turbine result in korea. Through this presentation of extracted code, I hope that it make other small turbine concerner be familiar to perform an efficiency test. for small turbine. And, some analysis of that, make other to feel the importance of efficiency test.

• Journal of Korean Dental Science
• /
• v.3 no.2
• /
• pp.34-39
• /
• 2010

In our daily practice, we think about the diagnosis of our patient and get into a situation wherein we have to make a clinical decision. Diagnosis and treatment come from the knowledge and experiences that each dentist should have, but sometimes, we can have doubts on our decisions. "On what evidence did I make such decision? Was that really right?" Drawing our attention these days as a possible answer to this question, evidence-based dentistry seeks to apply the best available evidence gained from the scientific method to medical decision making. To make a good decision, the strength of evidence is assessed. Specifically, randomized controlled trial, systematic review, and meta-analysis are considered the highest level of evidence; cohort study, case control study, case series, animal study, bench test, and biological plausibility follow. With the approach of evidence-based dentistry, we can make objective, scientifically sound clinical decisions. It is also patient-oriented, incorporating clinical experiences and stressing good judgments; thorough and comprehensive, it uses transparent methodology. That is the reason evidence-based dentistry can be better than other assessment methods when we make a clinical decision in modern dentistry.

• The Research Journal of the Costume Culture
• /
• v.13 no.5 s.58
• /
• pp.712-728
• /
• 2005

This study consists of the stimuli of a female model in her twenties with twenty-three different facial make-up and survey on the differences of them for the development of make-up color system, based on the color-sense on the Korean's skin-tone and make-up color, to enforce the efficiency of beauty education. The result of this study and the suggestion is as followed. Firstly, Familiarity, Intelligence, Fitness, Charm, Tradition and Youth were came out as the result of factor analysis of make-up color image perception. Secondly, the stimulus of bare face was evaluated as more familiar and intelligent than the one with image make-up but perceived as unhealthy and not untraditional. Thirdly, skin tone had a big impact on both in lip color that's been applied in monotonous make-up and in image make-up that had been applied in contrastive make-up. Through these results, it is confirmed that the skin tone and make-up colors were influential variables in the research on facial image perception and preference against a female model in her 20s, and also the image test and preference can be changed according to the color contrasts. This research will be used as a basic tool for the development of make-up color applying system with image perception of statics of population variables and preference research. Also it aims to suggest the alternatives to perform the present collage make-up education for more systematic and organized education.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.6
• /
• pp.922-930
• /
• 2004

An experimental investigation was performed to study on the generation of air bubble and air core with swirling flow in a horizontal cicular tube. To determine some characteristics of the flow, 2D PIV technique is employed for velocity measurement in water. The experimental rig is manufactured from an acryl tube. The test tube diameter of 80mm, and a length of 3000mm. The used algorithm is the gray leve cross-correlation method(Kimura et al. 1986). An Ar-ion laser is used and the light from the laser(500mW) passes through a probe to make two-dimensional light sheet. In order to make coded images of the tracer particles on one frame, an AOM(Acoustic-Optical Modulator) is used. The maximum axial velocities showed near the test tube wall at y/D =0.1 and y/D =0.9 along the test tube. The higher Reynolds number increase, the lower axial velocities are showed in the center of the test tube. The air bubbles are generated from Re =10,000 and developed into air core from the recirculating water pump rpm equal 30Hz. The pressure and temperature are measured across the test tube at X/D=3.33.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.93-96
• /
• 2007

Recently, much attentions have been paid on the commercialization of PEMFC, especially for the applications of residential and portable. In order to achieve the early commercialization of PEMFC, thee are two hurdles to overcome. One is cost down and the other is improvement of durability of the system components. Numerous companies have tried to reduce the production cost and the main research topics have been changed from performance to durability improvement. In this work, acceleration test were performed to find and evaluate the main reason of degradation of the MEA(membrane-electrode assembly) which is one of the core component of the PEMFC system. Based upon the test results, a way to make durable MEA was suggested. Acceleration tests were made by applying high voltage of 1.2V to the several kinds of single cells to increase the growth of catalyst particles. Cell performance, ac-impedance and electrochemically active area measurements were made atfter every 8 hours of acceleration test. Degradations of catalyst and membrane were examined by SEM, TEM and XRD. Obtained results were discussed in terms of structural stability and loss of catalyt and ionomers in the electrode layer. In addition, the way to make highly durable MEA was suggested.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.13 no.3
• /
• pp.1-6
• /
• 1976

In this paper, a method of test pattern generation for the functional failure in both combinational and sequentlal logic networks by using exterded Boole an difference is proposed. The proposed technique provides a systematic approach for the test pattern generation procedure by computing Boolean difference of the Boolean function that represents the Logic network for which the test patterns are to be generated. The computer experimental results show that the proposed method is suitable for both combinational and asynchronous sequential logic networks. Suitable models of clocked flip flops may make it possible for one to extend this method to synchronous sequential logic networks.