• 산업경영시스템학회지
• /
• 제42권2호
• /
• pp.28-35
• /
• 2019

Since guided missiles with the characteristics of the one-shot system remain stored throughout their entire life cycle, it is important to maintain their storage reliability until the launch. As part of maintaining storage reliability, period of preventive test is set up to perform preventive periodic test, in this case failure detection rate has a great effect on setting up period of preventive test to maintain storage reliability. The proposed method utilizes failure rate predicted by the software on the basis of MIL-HDBK-217F and failure mode analyzed through FMEA (Failure Mode and Effect Analysis) using data generated from the actual field. The failure detection rate of using the proposed method is applied to set periodic test of the actual guided missile. The proposed method in this paper has advantages in accuracy and objectivity because it utilizes a large amount of data generated in the actual field.

• 한국융합학회논문지
• /
• 제13권4호
• /
• pp.1-6
• /
• 2022

웹 크롤링 데이터를 이용한 실시간 시스템은 원격지의 데이터와 동일한 데이터베이스의 데이터를 사용자에게 제공해야 하며, 이를 위해서 웹 크롤러는 원격지 데이터의 변경 여부를 확인하기 위해 원격 서버에 반복적인 HTTP(HyperText Transfer Protocol) 요청을 수행해야 한다. 이 과정은 크롤링 서버와 원격 서버의 네트워크 부하를 일으키며 과도한 트래픽 발생 등의 문제의 원인이 된다. 이러한 문제점을 해결하기 위해 본 논문에서는 사용자 이벤트를 기반으로 크롤링 서버의 데이터와 다중 원격지 데이터와의 동일성을 유지하는 신뢰성을 확보함과 동시에 네트워크의 과부하를 줄일 수 있는 실시간 웹 크롤링 기법을 제안한다. 제안된 방법은 단위 데이터와 목록 데이터를 요청하는 이벤트를 기반으로 크롤링 프로세스를 수행한다. 실험 결과, 제안된 방법은 기존 웹 크롤러에서의 네크워크 트래픽 과부하를 줄이면서 데이터의 신뢰성을 확보할 수 있음을 확인하였다. 향후에는 이벤트 기반 크롤링과 시간 기반 크롤링에 대한 융합에 대한 연구가 필요하다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제15권9호
• /
• pp.710-714
• /
• 2009

광학 저장 매체는 용량이 과거에 비하여 크게 증가하여 현재 블루레이 디스크(Blu-ray Disc)의 경우 25GB 정도의 대용량을 제공하고 있어 백업용으로 널리 쓰이는 테이프를 대체하는 것이 가능해졌다. 그러나 데이터 기록면이 외부에 노출되어 있는 광학 저장 매체의 특성상 스크래치와 같은 표면의 손상으로 쉽게 데이터를 손실할 수 있으므로 데이터를 장기간 동안 안정적으로 보관하기 위해서는 신뢰도를 향상시킬 수 있는 기법이 필요하다. 이를 위해 저장할 데이터에 LDPC 코드를 적용하여 중복 데이터를 생성하고 중복 데이터들을 광학 저장 매체 상에 요구 신뢰도를 충족시켜줄 수 있는 간격을 갖도록 고루 분산 시켜 배치하는 방법을 이용해 신뢰도를 향상시켰다.

• 한국정보처리학회논문지
• /
• 제7권5호
• /
• pp.1434-1445
• /
• 2000

An expert system executes the inference, based on the knowledge of specific domain. the reliability on the results of inference depends upon both the consistency and accuracy of knowledge. This is the reason why expert system requires the facilities which can practice an access to the various kinds of knowledge and maintain the consistency and accuracy of knowledge an maintain the consistency and accuracy of knowledge. This paper is to implement an expert system permitting an access of declarative and procedural knowledge in the knowledge base and in the data base. This paper is also to implement a knowledge acquisition system which adds the knowledge a only if its accuracy and consistency are maintained, after verifying the potential errors such as contradiction, redundancy, circulation, non-reachable rule and non-lined rule. In consequence, the expert system realizes a good access to the various sorts of knowledge and increases the reliability on the results of inference. The knowledge acquisition system contributes tro strengthening man-machine interface that enables users to add the knowledge easily to the knowledge base.

• 반도체디스플레이기술학회지
• /
• 제22권1호
• /
• pp.43-48
• /
• 2023

This paper discusses the design of 32Mbyte asynchronous nonvolatile memory modules, which includes self-diagnosis and RTC (Real Time Clock) functions to enhance their data stability and reliability. Nonvolatile memory modules can maintain data even in a power-off state, thereby improving the stability and reliability of a system or device. However, due to the possibility of data error due to electrical or physical reasons, additional data loss prevention methods are required. To minimize data error in asynchronous nonvolatile memory modules, this paper proposes the use of voltage monitoring circuits, self-diagnosis, BBT (Bad Block Table), ECC (Error Correction Code), CRC (Cyclic Redundancy Check)32, and data check sum, data recording method using RTC. Prototypes have been produced to confirm correct operation and suggest the possibility of commercialization.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.406-408
• /
• 2004

It is very necessary to adopt bad data processing in order to maintain the security and the reliability of data acquisition and management in the substation. This paper presents a bad data processing method of per module unit by using rule based system. The propriety of this method has been verified by the case study

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권2호
• /
• pp.93-96
• /
• 2014

RFID (Radio Frequency IDentification) system is recognition technology which can maintain various object's information. Reliability of RFID tags is the most important factor in RFID system. In this paper, we proposed ALT (Accelerated Life Test) method for UHF RFID tags. Temperature and humidity were adopted as stress factors and the accelerated life tests were conducted in three different conditions. We performed failure analysis for identifying failure mechanism and statistical analysis of test data. In the statistical analysis, we employed Inverse Power law for relationship between tag's life and stress. Through the statistical analysis, we proposed acceleration factor for several levels of temperature-humidity. The reliability qualification test plans were also designed for the tag's target reliability.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.132-132
• /
• 2000

The reliability of EIC systems in hot rolling mill is indispensable and very important in order to maintain stable production. Signals obtained from sensors and control system should be analyzed to monitor the condition of down coiler in hot rolling mill. We develope a monitoring system of down coiler which is composed of three parts (1) data acquisition and MMI (2) signal processing and analyzing, and (3) automatic data saving. Also it is designed to enable to inform users the abnormal conditions of down coiler. This developed system is expected to make it possible to reduce long downtime, secure high facility precision, and maintain high control levels.

• 한국병원경영학회지
• /
• 제11권3호
• /
• pp.42-55
• /
• 2006

The present study is designed to develop surveying tools to measure stressors of and social supports for Radiological Technologists which may play a role to alleviate their stresses caused from their job environments. For this purpose, an analysis of reliability by factors of personal stressors was conducted on 890 radiologists who are working at 44 general hospitals in 16 cities and provinces across the country. The results of the analysis may be summed up as follows: Six factors in 2 concerned fields turned out to be major tools for use as items of questionnaires to measure social supports for and organizational culture of Radiological Technologists. The factors determined to be applicable for survey with reliability coefficient of more than 0.7 measured by factors for internal coherence included social supports on the job(0.90), off-the-job social supports(0.81), job satisfaction(0.80), devotion for job by length of service(0.81) and emotional devotion for job(0.80), all deemed to be appropriate as survey items. In the verifying process of the results, it was found that normative devotion for job(0.61) showed lower reliability as its statistical coefficient was analyzed to be less than 0.7. It seemed, therefore, necessary to reconstruct items or re-select such ones only that can maintain internal coherence in order to analyze appropriateness of related measuring tools, or to develop new measuring tools. Although the outcomes of this study can be used to verify reliability and appropriateness of concerned concepts to assess stresses caused during the job performance of Radiological Technologists, it may be improper to adopt them to measure all types of social supports and stresses that occur generally under the job environment. It is desired, however, to compare and analyze the findings of the present study with others and to utilize them as basic data for further development of tools that can maintain internal coherence in terms of reliability and appropriateness in spite of changing social environments.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.300-307
• /
• 2016

Cloud computing that provide a elastic computing service is more complex compared to the existing computing systems. Accordingly, it has become increasingly important to maintain the stability and reliability of the computing system. And troubleshooting and real-time monitoring to address these challenges must be performed essentially. For these goals, the handling of the log data is needed, but this task in cloud computing environment may be more difficult compared to the traditional logging system. In addition, there are another challenges in order to have the admissibility of the collected log data in court. In this paper, we design secure logging service that provides the management and reliability of log data in a cloud computing environment and then analyze the proposed system.