• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.12
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• Korean Journal of Environment and Ecology
• /
• v.10 no.1
• /
• pp.1-13
• /
• 1996

This study was conducted to investigate the avifauna and to suggest the management discipline for the protection of bird community in Odaesan National Park. Field survey was carried over 2 main trails by line transect method from mid June to early December in 1996. The 1st section included the area from Woljongas to Sangwonsa 7km distance. The 2nd section survey started from Sangwonsa via Bukdaesa and the summit of Odaesan to Sangwonsa 9.8 km distance. The study results were as follows ; The observed birds belonged to 9 orders 22families 52species, they also had Black Woodpecker(Dryocopus martius)designated as natural monument No. 242, Chinese Sparrow Hawk(Accipiter soloensis) and Kestrel(Falco tinnunculus) as natural munumet No. 323, Scops Owl(Out scops)and Korean Wood Owl(Strix aluco) as No. 324. These birds also were classified into 25 species for residents, 16 species for summer visitors, 8 species for passage migrants, 3 species for winter visitors, respectionely. The 2nd section showed a high species richness and individuals in every season, however, had a difference in species composition with 1st section. Nesting guild of breeding bird community used highly in order of bush, hole, and canopy as a nest resources. It is suggested that high bush-nesting guild had a deep relationship with bush layer located in the ecotone of 1st section and that located in the high elevated zone in 2nd section. Hole-nesting guild such as Black Woodpecker(Dryocopus martius), Gray-headed Woodpecker(Picus canus) and Great Spotted Woodpecker(Dendrocopos major) were surveyed only in 2nd section, so it could be attribute to the small fragmentation and the growing of high diameter at breast height(D.B.H) tree in 2nd section. It is urgent that the management of camping ground and people for the conservation of brook in 1nd section, trail protection for the prevention from trail enlargement in 2nd section for the bird protection. Artificial food in snowy winter will provide the good breeding condition with the residents and migrants. And, the endeavor to lessen the habitat fragmentation will be beneficial to the birds who have a large home range such as Black Woodpecker(Dryocopus martius) and Korean Wood Owl(Strix aluco). For the control of Domestic Dove(Columba livia) populations, it could be recommended that the elimination of their nesting resources by net.

• Korean Journal of Environment and Ecology
• /
• v.26 no.4
• /
• pp.498-511
• /
• 2012

Mountainous wetland have many species such as II grade endangered species of wild flora and fauna(Drosera rotundifolia) and environmental indicator species(Utricularia racemosa, Habenaria linearifolia, Parnassia palustris, Molinia japonica, etc.). Accordingly, the mountainous wetlands is very important. However, most mountainous wetlands will disappear by natural or artificial aridness processes. Thus, it needs to manage mountainous wetland for protecting from aridness. This study has found out the wetland status of the environmental ecology and aridness processes moreover, it has suggested ways of improving wetland conservation plan and wetland aridness management plan. According to the results of topography structure survey, Hwaeom wetland's altitude is ranged within 750~810m(87.4%), and slope is less than $10^{\circ}$. There was ideally suited mountainous wetland. However, the water supply(1.6 meters depth and 0.8 meters wide) was built on under the wetland. For that reason, there was concerned about the aridness processes by sweeping away peat layer and dropping the water level. The distribution area of hygrophyte was narrowed to 6.7% whereas, woody plants and xerophytic plants was achieved a dominant position. If it leaves the situation as it is, the mountainous wetland will be developed next succession as forest ecosystem. Therefore, in order to sustain the mountainous wetland from aridness, it is set to the base direction of conservation and management as main schemes. Moreover, we have suggested that setting the vegetation conservation and management area which considering a ecological vegetation characteristics, managing the ecotone vegetation, setting the buffer zone for protection of ecological core areas, protecting the mountainous wetland indicator species and designating the management vegetation. In conclusion, in order to sustain and maintain a soundly wetland ecosystem, it needs to several management of wetlands damage factors. 1) suppression of the excessive groundwater to basin, 2) stabilization of wetland via hydrologic storage, 3) suppression of changing and transforming wetland into forest by succession via management of xerophytic plants.

• Journal of Wetlands Research
• /
• v.1 no.1
• /
• pp.29-44
• /
• 1999

Vegetation structure and distribution of the vascular hydrophytes and hygrophytes, and the growth pattern, standing crop and amounts of nutrient uptake by Salix species were investigated in the upper stream wetlands of the Namgang-Dam, Chinju-city, Gyeongsangnam-do, Korea from April to November in 1997. The flora was composed of 43 hydrophytes and 241 hygrophytes, or total 284 vascular plants. The life forms of the hydrophytes were classified as 27 kinds of emergent plants, 4 floating-leaved plants, 3 free-floating plants, and 9 submersed plants. In the herb layer, the dominant species was Persicaria hyciropiper, and the ranges of the species diversity indices (H'), equitabilities, (J') and community similarity indices (CCs) were 1.59~1.89, 0.87~0.96, and 0.35~0.83, respectively. In the shrub and subtree layers, 17 kinds of Salix species were supposed to the pioneer plants at the early stage of the succession. The number of branches per main stem of Salix species was 5.0. The DBH class-frequency histograms of Salix species were the reverse J type, and the natural regeneration of the Salix community was expected. Basal area of Salix species per square meter was $24.87cm^2$. Volume of Salix species per square meter was $12,008cm^3$ and total phytomass of the Salix species was estimated as 12,894 ton. Biomass distribution of Salix species in the stem, the branch and twig, and the leaf was 64.1%, 28.1%, and 7.8%, respectively. The amounts of nitrogen and phosphorus absorbed by Salix species were 68,022 and 19,823 kg. It was recommended that application and conservation of the wetland and other counterplans are indispensable to reduce the adverse effects of water pollution and to preserve the wetland ecosystem.

• Journal of Korea Water Resources Association
• /
• v.40 no.11
• /
• pp.887-898
• /
• 2007

A physically based semi-distributed model, SWAT was applied to the Chungju Dam upstream watershed in order to investigate the spatial and temporal characteristics of watershed sediment yields. For this, general features of the SWAT and sediment simulation algorithm within the model were described briefly, and watershed sediment modeling system was constructed after calibration and validation of parameters related to the runoff and sediment. With this modeling system, temporal and spatial variation of soil loss and sediment yields according to watershed scales, land uses, and reaches was analyzed. Sediment yield rates with drainage areas resulted in $0.5{\sim}0.6ton/ha/yr$ excluding some upstream sub-watersheds and showed around 0.51 ton/ha/yr above the areas of $1,000km^2$. Annual average soil loss according to land use represented the higher values in upland areas, but relatively lower in paddy and forest areas which were similar to the previous results from other researchers. Among the upstream reaches, Pyeongchanggang and Jucheongang showed higher sediment yields which was thought to be caused by larger area and higher fraction of upland than other upstream sub-areas. Monthly sediment yields at the main outlet showed same trend with seasonal rainfall distribution, that is, approximately 62% of annual yield was generated during July to August and the amount was about 208 ton/yr. From the results, we could obtain the uniform value of sediment yield rate and could roughly evaluate the effect of soil loss with land uses, and also could analyze the temporal and spatial characteristics of sediment yields from each reach and monthly variation for the Chungju Dam upstream watershed.

• Applied Microscopy
• /
• v.37 no.1
• /
• pp.23-33
• /
• 2007

The lacrimal gland are compound tubule-acinar glands. The main lacrimal function is the production of the aqueous layer, the thickest and major constituent of the precorneal tear film. The lacrimal gland also has an important function in the defense system of the ocular surface, forming a part of the conjunctival-associated hymphoid tissue. The ultrastructural characteristics of the lacrimal gland of the rabbit were described. The lacrimal tissues of rabbits were processed through the conventional techniques for transmission electron microscopy. The secretory portions consisted of three cell types: 1. Serous cells with electron dense secretory granules. 2. Seromucous cells containing variable moderately electron dense secretory granules with flocculent material. 3. Mucous rolls containing mucous secretory granules. The serous cells were situated at the basal portion of acini, and they contained electron dense granules of variable densities and sizes. The seromucous cells contained a few protein secretory granules and more mucous secretory granules. The mucous cells contained even fewer protein secretory granules and exclusively mucous secretory granules. The epithelium of the intralobular ducts showed secretory granules, junctional complexes, and large basolateral intercellular spaces with lateral folds. These study might be helpful in determining inter-relationships, similarities and differences among the orbital glands of various physiological or pathological conditions.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.5
• /
• pp.265-277
• /
• 2019

Using the measured data of waves and shore-line, we reviewed the grand circulation process and seasonal variation of beach cusp at the Mang-Bang beach from the perspective of trapped mode Edge waves known as the driving mechanism of beach cusp. In order to track the temporal and spatial variation trends of beach cusp, we quantify the beach cusp in terms of its wave length and amplitude detected by threshold crossing method. In doing so, we also utilize the spectral analysis method and its associated spectral mean sand wave number. From repeated period of convergence and ensuing splitting of sand waves detected from the yearly time series of spectral mean sand wave number of beach cusp, it is shown that the grand circulation process of beach cusp at Mang-Bang beach are occurring twice from 2017. 4. 26 to 2018. 4. 20. For the case of beach area, it increased by $14,142m^2$ during this period, and the shore-line advanced by 18 m at the northen and southern parts of the Mang-Bang beach whereas the shore-line advanced by 2.4 m at the central parts of Mang-Bang beach. It is also worthy of note that the beach area rapidly increased by $30,345m^2$ from 2017.11.26. to 2017.12.22. which can be attributed to the nature of coming waves. During this period, mild swells of long period were prevailing, and their angle of attack were next to zero. These characteristics of waves imply that the main transport mode of sediment would be the cross-shore. Considering the facts that self-healing capacity of natural beaches is realized via the cross-shore sediment once temporarily eroded. it can be easily deduced that the sediment carried by the boundary layer streaming toward the shore under mild swells which normally incident toward the Mang-Bang beach makes the beach area rapidly increase from 2017.11.26. to 2017.12.22.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.50-58
• /
• 2005

Recently, the imaging of geological structures beneath water-covered areas has been in great demand because of numerous tunnel and bridge construction projects on river or lake sites. An electrical resistivity survey can be effective in such a situation because it provides a subsurface image of faults or weak zones beneath the water layer. Even though conventional resistivity surveys in water-covered areas, in which electrodes are installed on the water bottom, do give high-resolution subsurface images, much time and effort is required to install electrodes. Therefore, an easier and more convenient method is sought to find the strike direction of the main zones of weakness, especially for reconnaissance surveys. In this paper, we investigate the applicability of the streamer resistivity survey method, which uses electrodes in a streamer cable towed by ship or boat, for delineating a fault zone. We do this through numerical experiments with models of water-covered areas. We demonstrate that the fault zone can be imaged, not only by installing electrodes on the water bottom, but also by using floating electrodes, when the depth of water is less than twice the electrode spacing. In addition, we compare the signal-to-noise ratio and resolving power of four kinds of electrode arrays that can be adapted to the streamer resistivity method. Following this numerical study, we carried out both conventional and streamer resistivity surveys for the planned tunnel construction site located at the Han River in Seoul, Korea. To obtain high-resolution resistivity images we used the conventional method, and installed electrodes on the water bottom along the planned route of the tunnel beneath the river. Applying a two-dimensional inversion scheme to the measured data, we found three distinctive low-resistivity anomalies, which we interpreted as associated with fault zones. To determine the strike direction of these three fault zones, we used the quick and convenient streamer resistivity.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.164-179
• /
• 2014

The Buddhas of the Three Words in a form of arranging Bhaiṣajyaguru and $Amit{\bar{a}}bha$ at its side based on ${\acute{S}}{\bar{a}}kyamuni$ at the center is enshrined in Daeungbojeon Hall of Daeheungsa Temple located at Haenam. So far, this Buddhas of the Three Words has been known as a wooden Buddha statue. However, as a result of X-ray screening, in left/right Buddha statues excepting main Buddha, wood and molding clay layer were observed at the same time. Therefore, this study intended to observe its internal structure, grafting method and to clarify making technique of Buddha statue during Joseon era based on image information being obtained through X-ray screening of The Buddhas of the Three Words of Daeheungsa Temple. As its result, it was revealed that form of ${\acute{S}}{\bar{a}}kyamuni$ was completed by mainly grafting 5 pieces of timber and this statue shows a typical wood grafted Buddha statue during Joseon era. Form of Bhaiṣajyaguru and $Amit{\bar{a}}bha$ were completed based on molding technique by applying clay on sculpture similar to its appearance after sculpturing more than 10 pieces of timber through its grafting. In other words, internal timber is considered to play a role of its core and grafting method of timber is more close to a technique of molding Buddha statue than to that of wooden Buddha statue during Joseon era. However, clay was directly applied on timber thinly, not applying clay thickly on it after winding straw rope on wooden core and its characteristic is that its facial area was completely composed of wooden construction only. Therefore, it is hard to rule out a possibility that the original sculpturing intention of an artist might be a wooden Buddha statue but in view of the fact that a word, 'molding' was used in a record of relics buried in statue, it could be seen that this Buddha statue might have been recognized as a molding statue at the time when creation of this statue was completed. It is considered that number of case of making statue based on this technique would be more increased when more results of X-ray screening should be accumulated and if more data should be collected, it would provide a significant evidence for identifying chronological, regional aspects of making technique of Buddha statue.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.2
• /
• pp.175-184
• /
• 2019

The epidermal growth factor (EGF) has a intrinsic function of inducing growth and proliferation of cells through interacting with cell membrane receptors in human epidermis and dermis layer. These functions of EGF are used as a main ingredient for wound healing medicines and anti-aging cosmetics. As a cosmetic ingredient, the EGF has a problem in exhibiting its natural efficacy due to the lack of the ability to penetrate through the stratum corneum, which is known as the skin barrier. In this study, a recombinant human epidermal growth factor ($MTD_{151}-EGF$) fused with the macromolecule transduction domain $(MTD)_{151}$ with the skin penetration ability was developed to improve the skin penetration efficiency of the EGF. Expression of $MTD_{151}-EGF$ was performed in E. coli transformed with a vector encoding the $MTD_{151}-EGF$ gene and then purified. The purified $MTD_{151}-EGF$ was evaluated using cell proliferation assay, cytotoxicity test and skin penetration test by franz diffusion cell assay and artificial skin. Cell proliferation activity of $MTD_{151}-EGF$ purified to high purity of 99% or above was equivalent to the EGF or better, and cytotoxicity was not observed. In addition, the $MTD_{151}-EGF$ showed an excellent penetration efficiency compared to the EGF in the skin penetration test with EGF and $MTD_{151}-EGF$ labeled by FITC in an artificial skin penetration model. Based on the quantitative analysis of the penetrating substance using franz diffusion cell assay, the amount of penetration was about 16 times more than that of EGF. These results can be regarded as an effective alternative to improve the existing physical transdermal penetration method related to the use of various active ingredients for cosmetics.