• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.9
• /
• pp.457-464
• /
• 2005

In this paper a 3D memory system that allows 17 access types at an arbitrary position is introduced. The proposed memory system is based on two main functions: memory module assignment function and address assignment function. Based on them, the memory system supports 17 access types: 13 Lines, 3 Rectangles, and 1 Hexahedron. That is, the memory system allows simultaneous access to multiple data in any access types at an arbitrary position with a constant interval. In order to allow 17 access types the memory system consists of memory module selection circuitry, data routing circuitry for READ/WRITE, and address calculation/routing circuitry In the point of view of a developer and a programmer, the memory system proposed in this paper supports easy hardware extension according to the applications and both of them to deal with it as a logical three-dimensional away In addition, multiple data in various across types can be simultaneously accessed with a constant interval. Therefore, the memory system is suitable for building systems related to ,3D applications (e.g. volume rendering and volume clipping) and a frame buffer for multi-resolution.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.6
• /
• pp.3074-3091
• /
• 2019

With the widespread use of the Internet, services for providing large-capacity multimedia data such as video-on-demand (VOD) services and video uploading sites have greatly increased. VOD service providers want to be able to provide users with high-quality keyframes of high quality videos within a few minutes after the broadcast ends. However, existing keyframe extraction tends to select keyframes whose quality as a keyframe is insufficiently considered, and it takes a long computation time because it does not consider an HD class image. In this paper, we propose a keyframe selection method that flexibly applies multiple keyframe quality metrics and improves the computation time. The main procedure is as follows. After shot boundary detection is performed, the first frames are extracted as initial keyframes. The user sets evaluation metrics and priorities by considering the genre and attributes of the video. According to the evaluation metrics and the priority, the low-quality keyframe is selected as a replacement target. The replacement target keyframe is replaced with a high-quality frame in the shot. The proposed method was subjectively evaluated by 23 votes. Approximately 45% of the replaced keyframes were improved and about 18% of the replaced keyframes were adversely affected. Also, it took about 10 minutes to complete the summary of one hour video, which resulted in a reduction of more than 44.5% of the execution time.

• Journal of the Korea Computer Graphics Society
• /
• v.15 no.2
• /
• pp.19-34
• /
• 2009

This paper presents an automatic rendering system for 3D meshes which generates images in the style of oriental black ink painting. In this paper, we analyze the characteristics of black ink painting and present some requirements for our black ink rendering system. Then we survey the steps used by artists to create black ink paintings. Based on the analysis of drawing steps, we propose a black ink rendering system which reproduces the key features of black ink painting through three sub-systems: the feature line layer, the interior shading layer, and the media layer. The main contribution of this paper is to introduce new methods which generate realistic and natural results very fast while any simulation methods are not used to satisfy real-time performance. We describe our implementation of each of these, and demonstrate our results in the major three styles of black ink painting: the outline style, the spontaneous style, and the outline-spontaneous style. Our system renders 3D models of moderate complexity at interactive frame rates. As a result, we expect that our system can be directly applied to real-time applications such as computer games and virtual environments.

• Journal of the Korean Society of Costume
• /
• v.41
• /
• pp.23-47
• /
• 1998

Ornaments is a province of the fashion. It usually express noble metals and jewel's adorn-ment as the symbol of status and riches for a long time. The ornament design of Jewels drawing project and a product by computer are increased development and as exertion as a realization of automation. Through the use of CAD software(Auto CAD R 13 & Jewel CAD) \circled1 A design development of the jewels in industrial society \circled2 A metals art & design on the dress and it's ornaments - Study about application of principle(liberal curve, arrangement of repeated form, gradual unity, rhythmical harmony) Although Auto CAD don't various expression of Jewels than a Jewel CAD, formative.scientific.funtional development of geometrical form is free. That is (to say), geometrical form is given much weigh in the general CAD, but Jewel CAD made concentrate software on the jewels design for the expression of liberal form. The CAD/CAM software for jewellery program is composed of main menu, icons, hotkeys. Changing form is derived from a definite point, curve elements of a drawing. \circled1 3-Dimensional \circled2 Easy and flexible \circled3 Bulit-in and self created library \circled4 From simple wire frame to full color images. As a CAD can practice all the creation activity effectively, from Design & Drafting Software to Rendering generally can present precise results. A point of view of the connection the scientist and art, this practicableness of CAD have a lot of possiblity of development. That will do much for the related fields of industry. Consequently, subjective intension of a creator & humanity with value plays role in practical application of the design.

• Journal of Mechanical Science and Technology
• /
• v.20 no.10
• /
• pp.1534-1540
• /
• 2006

Concurrent Engineering (CE) is a popular method employed in product development. It treats the whole product design process by the consideration of product quality, cost, rate of progress, and demands of customers. The development of computer and network technologies provides a strong support to the realization of CE in practice. Aiming at the characteristics of CE and network collaborative design, this paper built network collaborative design system frame. Through the analysis of the network collaborative design modes based on CE, this paper provided a novel network collaborative design integration model. This model can integrate the product design information, design process, and knowledge. Intelligent collaboration was considered in the proposed model. The study showed that the proposed model considered main factors such as information, knowledge, and design process in collaborative design. It has potential application in CE fields.

• Earthquakes and Structures
• /
• v.5 no.4
• /
• pp.439-459
• /
• 2013

Main objective of the present study is to determine the statistical properties and suitable probability distribution functions of spectral displacements from nonlinear static and nonlinear dynamic analysis within the frame work of Monte Carlo simulation for typical low rise and high rise RC framed buildings located in zone III and zone V and designed as per Indian seismic codes. Probabilistic analysis of spectral displacement is useful for strength assessment and loss estimation. To the author's knowledge, no study is reported in literature on comparison of spectral displacement including the uncertainties in capacity and demand in Indian context. In the present study, uncertainties in capacity of the building is modeled by choosing cross sectional dimensions of beams and columns, density and compressive strength of concrete, yield strength and elastic modulus of steel and, live load as random variables. Uncertainty in demand is modeled by choosing peak ground acceleration (PGA) as a random variable. Nonlinear static analysis (NSA) and nonlinear dynamic analysis (NDA) are carried out for typical low rise and high rise reinforced concrete framed buildings using IDARC 2D computer program with the random sample input parameters. Statistical properties are obtained for spectral displacements corresponding to performance point from NSA and maximum absolute roof displacement from NDA and suitable probability distribution functions viz., normal, Weibull, lognormal are examined for goodness-of-fit. From the hypothesis test for goodness-of-fit, lognormal function is found to be suitable to represent the statistical variation of spectral displacement obtained from NSA and NDA.

• International Journal of Contents
• /
• v.4 no.2
• /
• pp.7-12
• /
• 2008

In this paper, we present a real-time physical simulation model of water surfaces with a novel method to represent the water mass flow in full three dimensions. In a physical simulation model, the state of the water surfaces is represented by a set of physical values, including height, velocity, and the gradient. The evolution of the velocity field in previous works is handled by a velocity solver based on the Navier-Stokes equations, which occurs as a result of the unevenness of the velocity propagation. In this paper, we integrate the principle of the mass conservation in a fluid of equilateral density to upgrade the height field from the unevenness, which in mathematical terms can be represented by the divergence operator. Thus the model generates waves induced by horizontal velocity, offering a simulation that puts forces added in all direction into account when calculating the values for height and velocity for the next frame. Other effects such as reflection off the boundaries, and interactions with floating objects are involved in our method. The implementation of our method demonstrates to run with fast speed scalable to real-time rates even for large simulation domains. Therefore, our model is appropriate for a real-time and large scale water surface simulation into which the animator wishes to visualize the global fluid flow as a main emphasis.

• Journal of the Korea Construction Safety Engineering Association
• /
• s.41
• /
• pp.88-101
• /
• 2007

Recently, the condensation of walls often occurring in domestic high-rise apartment buildings is an important problem. The main purpose of this study is to develop the prediction method for the surface condensation on curtain wall in high-rise apartment buildings. Therefore, in this study, we first analyzed exterior climate factors through the analysis of the Seoul climate data and predicted the change of indoor temperature by using Apache program to find the cause of the condensation state and to prevent condensation. Also, according to this result, exterior climate factors and interior factors, which caused the condensation, was examined. The thermal performance of the curtain wall and the range of potential condensation were analyzed to focus on high-rise apartment buildings through computer simulation programs. The results are as $follows;^1$) The frame edge of curtain wall has a higher U-value than in the center by $30%^2$) Because of stack effect, the rooms on the higher floor have a lower external ventilation rate resulting to a higher relative humidity3) Installing a ventilation system($20m^3$/h. person) makes it possible to have a higher external ventilation rate, resulting to a lower relative humidity.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.2
• /
• pp.126-132
• /
• 2005

In this paper, an auto-design system is introduced for a stamping tool based on commercial computer aided design system with its drafting language. The auto-design system consists of tool oriented product design subsystem which modifies and configures the product drawing, tool concept design subsystem which make a design of the punches and their punching progression and parts design subsystem that makes automatic dimension. The system is applied to the mechanical design of the stamping tool. The main logic of the system is based on half-edge theory, a kernel for the 3 dimensional CAD system, which is applied to 2 dimensional drafting auto-design system. The auto-design system enables to conspicuously reducing the designing time of the tool. In addition, there is little drafting error that had been about 3% without auto design program. It is effective to reduce the development time for new products because of rapid designing time of the tools, standardization of the stamping tool and the drafting rule for the auto-design system. The auto-design system yields high efficiency of the tool manufacturing system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.4
• /
• pp.437-442
• /
• 1997

An experimental study was carried out in a channel cavity with square heat surface by visual¬ization equipment with Mach - Zehnder interferometer and laser apparatus. The image processing system consists of one commercial image board slit into a personal computer and 2-dimensional sheet light by Argon-Ion Laser with cylindrical lens and flow picture recording system. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system which adopted two¬frame grey-level cross correlation algorithm. Heat source was uniform heat flux(o.4W/cm$^2$, , O.8W/cm$^2$, 1.2W/cm$^2$). Obtained result showed various flow patterns such as kinetic energy distribution. Severe unsteady flow fluctuation within the cavity are remarkable and sheared mixing layer phenomena are also found at the region where inlet flow is collided with the counter-clockwise rotating main primary vortex. Photographs of Mach ~ Zehnder are also compared in terms of constant heat flux.