Anaerobic digestion has recently attracted all over the world and Korea also shows no exception. The major benefits of anaerobic digestion are energy production, water pollution control, pathogen reduction and effective manure production. In Korea it was recognized in late sixties that there was a positive need to find alternative energy for farmers household. The main traditional energy sources in rural area were crop residues and forestry products. Therefore Office of Rural Development through its Rural Guidance Bureau disseminated about 29,000 household biogas units from 1969 to 1975 to provide cooking fuel for farmers household and to improve the mode of farmers living standards. The units were welcomed by farmers at that time. Now, however, most of them are not using due to a number of reasons associated with cold winter and some techno-economical problems (in those day, fossil fuel was quite expensive to compare with other prices and since then farmers income was quickly increased). The author studied on bag type household biogas plant to solve some technical problems of existing household biogas plants, but this also has little appeal for the farmers. From 1977 author studied on village scale biogas plant with two pilot plants. From the viewpoint of energy production, COD removal, kill rate of pathogen and fertilizer value, the results obtained from the experiments were quite promising, but the construction cost of the village scale biogas plant was too high for the farmers in Korea. To find most suitable biogas plant for farmers in Korea through the simplifying the biogas digester, the author developed batch-load biogas plant. By feeding coarse crop residues and manures, total solids concentrations of the batch-load biogas plant are about 28 percent which is much higher than continous digester of 5-8 percent. The batch-load biogas plant was welcomed by many farmers in Korea when it was reported on TV and newspapers. The plant was disseminated 154 units in 1982, 766 units in 1983 and 812 units in 1984 as a promissing project. Besides these biogas plant experiments, studies were also conducted 1) to determine gas production rate with agricultural wastes, 2) to evaluate the effect of loading rate, dilution, retention time on biogas production, 3) to project the amount of potencial energy from agricultural wastes.
Journal of the Economic Geographical Society of Korea
/
v.16
no.3
/
pp.359-371
/
2013
Vietnam is the second-largest coffee exporter in the world. Most of the coffee areas are concentrated in Dak Lak-a province of commercial agricultural production, making up 32.4% of the total coffee area in Vietnam. At present, coffee is the main income source for the province, with coffee accounting for 85% and 40%(2010) of the export value of the province and of the country, respectively. Although the rapid development of Dak Lak's coffee production significantly benefits the province and its coffee planters socioeconomically, emerging urgent problems such as land dispute among ethic groups need to be addressed. This paper aims to examine how coffee-production development in Dak Lak has affected land mobility. In addition, we consider how these changes have affected the livelihoods of the Kinh-the majority ethnic group in Vietnam-as well as the ethnic minorities. As a result, it is pointed out that the coffee development in Dak Lak creates the individual ownership on land. This ownership is more and more fortified when the encroaching land of the Kinh immigrants happens impetuously defying the customary law of the ethnic minorities.
Park, Hye-Young;Kim, Hyun-Joo;Sim, Eun-Yeong;Kwak, Jieun;Chun, Areum;Jo, Youngje;Woo, Koan Sik;Kim, Mi Jung
The Korean Journal of Food And Nutrition
/
v.33
no.4
/
pp.440-446
/
2020
The purpose of this study was to derive the conditions for manufacturing rice porridge with optimum properties after reheating. The characteristics of rice porridge according to the soaking time, water addition rate, heating temperature, heating time, and cooling conditions were compared using the 'Samkwang' cultivar. In Step I, as the heating temperature increased, the weight change decreased and the viscosity increased, and the temperature known as the main factor of the gelatinization also appeared to affect the viscosity increase. In Step II, the viscosity and the texture properties was not significantly different as the soaking time was reduced, and 10 minutes was suitable because of due to the shortening effect of the total process time. In Step III, the residual heat was lowered by cooling after the rice porridge production, so the viscosity could be greatly reduced. Also, it was confirmed that the water addition rate of 900% and the heating temperature of 15 minutes were optimal manufacturing conditions. The next study will investigate the porridge processability of rice cultivars using these results.
Journal of the Korean association of regional geographers
/
v.6
no.1
/
pp.29-49
/
2000
The purposes of this study are to identify the characteristics of inner-city industrial community and to analyse the subsistence mode of small manufacturing enterprises in the industrial community in Taegu Metropolitan area. The case study area, Nowon 1. 2-ga dong, is the typical inner city industrial community, adjacent to old industrial complex, which was recently transformed from semi -industrial to semi-residential zoning district. Now there are many old one story housing, newly constructed multi stories housing and many small factories of metal and machinery products. The conflicts of between residents and small business owners are not serious but latent. The subsistence mode of small manufacturing enterprises in this area is characterized as the network production system. The main attributes of this mode are local integration, horizontal subcontracting and strong industrial linkages in production processes and transactions. These transactions are mainly made by face-to-face contacts. The small business owners' local social networks are seen as series of units which are interconnected through various types of social and business relations. They exchange business information as using social networks. In addition, the majority of them join local social clubs with their local business counterpartners. Finally, the locational advantages of inner-city industrial community are production network, different industrial linkages and characteristic industrial milieu such as social solidarity, informal labor market and incubator effects. But these advantages are being challenged from the contradiction between capital and laned property and the urban gentrification policy. Accordingly, there should be positive redevelopment policy considering the subsistence mode of small business in these areas.
This study analyzed the process of development and verification of standards through the competency analysis of fashion accessories products in the development of 'National Competency Standards'(NCS), which was carried out in 2013 for the fashion industry. The NCS for fashion accessories production was developed through three Focus Group Interviews (FGIs) and fashion accessories production was defined as "the process of design, development and manufacture intended to produce items that improve the degree of completion of fashion products that are produced from textile fabric, knitted fabric, leather and other materials such as bags, belts, hats, gloves, scarves, neckties and socks with the exception of clothes". The competency unit for fashion accessories production was analyzed in 11 categories: development of design; development of materials; production of prototype samples; calculation of cost; determination of mass production model and price; planning of main manufacture process; ordering of materials; planning for mass production; preparation for mass production; mass production; and inspection of completed products, and the verification was carried out on development outcomes through a survey carried out of on-site personnel. This study recommends the following direction for future improvements based on an analysis of the development process of the NCS for fashion accessories production. First, future development of standards should first provide a rational category system for each area of fashion good production based on the production process, which should be followed by a detailed competency survey. Second, in order to ensure a more efficient verification survey, an expert for each competency unit should be designated for the develop standard to induce a more sincere response. Also the questionnaire should require supplementation in order to collect the various additional opinions of experts of the field. Finally, this study concludes that it is urgent to procure an education infrastructure and specialized professors in order to apply the competency standard for fashion accessories production to the education sector. This study also concludes that the government will be required to provide systematic and consistent support aimed at supplementing development and forming a firm collaborative working environment for the industry and academia in order to improve the current education environment and build a more field-oriented education environment.
Through manifestation of the principles of commodity production spatial sharing of labour can be observed in the agriculture as well as in cattle production. Better adjustment of the production structure to the environment factors brings higher yields and more effective production. In being able to maximize the profit the entrepreneurs opt for producing output that closely matches to their featuring conditions. In contrary to the relatively high "mobility" of crop production animal husbandry and within this cattle production - as known - is strictly chained to forage production. On the basis of our economic research and as a result of multivariable analysis(factor analysis) it can be concluded that two variable groups(factors) are highly dominant in organizing profitable cattle production. First of them is the crop site factor (indicated by gold crown value), the second is the forage production feature(forage and grassland area and the yield of them). During recent years the weight of environmental factors suffered from devaluation. As a result of the central economic administration differentiating effects were suppressed and the chances of equalizing concepts strengthened. The outcome can be observed even today. In the regions, for example, being predominantly suitable for grass and forage cropping the milk and slaughter cattle production decreased. The same is ture for com and pig production regions. Unexploitment of local environmental features can be observed mainly in grassland management. Branches being potential user of grasslands hardly take them into consideration. Main method of rational use of grasslands is pasturing. Presence of pastures and the usage of them through cattle production is highly important not only for profitable production but also for maintaining ecological stability.
The purpose of this paper is to compare China's and Korea's marine fisheries industries in order to present the main features of China's marine fisheries and show the comparative advantages they have in production. The results indicate that China's marine fisheries have the following features. (1) The marine proportion of the fisheries industry economic activity is less than 60%. Fishing is 71.3% of that marine activity. (2) The production trends of marine fisheries history in China can be classified as follows: 1) an early growth period, 2) a deliberation/consolidation period, 3) a second growth period, 4) a third growth period, and 5) a fourth growth period. The growth rate has rapidly increased recently. (3) Fish production is over 70% of marine fishing fisheries, the next major product is crustacea. The production of shellfish occupies over 70% of marine aquaculture, seaweed production however, is only 22% of total marine aquaculture. (4) The licensed area for marine aquaculture in China is 586.3 ha and that area is 5.4 times larger than that of Korea. The allotted area for shellfish aquaculture is 60% of marine aquaculture, production areas of crustaceans occupy 27.3%, fish has 7 1%, and seaweed production only 5.7% of allocated marine aquaculture areas. (5) The proportion of power vessels for marine fisheries of China's total power vessel fleet is around 65%, and the marine fisheries portion of non - powered vessels constitutes only 12%. The highest proportion of power vessels engaged in marine fisheries activities is between 10 tonnes to 100 tonnes. (6) The portion of marine fishery workers of all fishery industry employees is 22%, and 70% of them are full - time workers. Of marine fishery workers, 64% are in the fishing sector, 22%, aquaculture workers, and the number of employees in marine fisheries is increasing every year. The analysis of China's fishery industry in the production competitiveness indicates as follows : (1) The licensed areas in marine aquaculture, number of fishing vessels, number of marine fishing workers in China's fishery industry are much more than those of Korea's. Therefore China is much more competitive than Korea in the quantity of production side. However, licensed areas for seaweed aquaculture are more extensive in Korea than China. In China, the number of power vessels of between 10 tonnes and 100 tonnes, the licensed shellfish aquaculture areas, and the number of fishing workers within the fisheries industry are much more than those of Korea. (2) It is estimated that the licensed areas in marine aquaculture, number of medium sized power vessels, number of marine fishery workers will be increased as the quantity of production factors grow in China. (3) At present, yield per Ha. in marine cultures is very low in China. Therefore it is estimated that aquaculture techniques have only been diffused recently in China. Yield of fish per Ha especially is much lower than that of Korea. So the level of aquaculture techniques seems much lower than that of Korea. (4) China is behind Korea in production technique, however the number of HP per boat in China is lower than that of Korea. Therefore, China is much more competitive than Korea in Costs. (5) Average fish catches per marine fishery worker in China is only 1/3 that of Korea's, and average marine aquaculture production in China is only 1/2 that of Korea. Therefore we can say Korea is more competitive than China in efficiency. The average income of marine fishery workers in China is higher that that of other Chinese industries. However, the competitiveness of the fisheries industry in China will be increased as more capital is invested and advanced techniques are developed.
Recently, much attentions have been paid on the commercialization of PEMFC, especially for the applications of residential and portable. In order to achieve the early commercialization of PEMFC, thee are two hurdles to overcome. One is cost down and the other is improvement of durability of the system components. Numerous companies have tried to reduce the production cost and the main research topics have been changed from performance to durability improvement. In this work, acceleration test were performed to find and evaluate the main reason of degradation of the MEA(membrane-electrode assembly) which is one of the core component of the PEMFC system. Based upon the test results, a way to make durable MEA was suggested. Acceleration tests were made by applying high voltage of 1.2V to the several kinds of single cells to increase the growth of catalyst particles. Cell performance, ac-impedance and electrochemically active area measurements were made atfter every 8 hours of acceleration test. Degradations of catalyst and membrane were examined by SEM, TEM and XRD. Obtained results were discussed in terms of structural stability and loss of catalyt and ionomers in the electrode layer. In addition, the way to make highly durable MEA was suggested.
A survey was performed to analyse the current animal disease control system by questionnaires. A questionnaire was administered to the livestock-related experts(n = 116) residing in Gyeong-In region and the livestock farmers(n = 108) residing in Incheon from June to July in 2007. The data was analyzed statistically by SPSS 12.0 version. First, the offices related to the animal disease control were dispersed and their cooperation was not effective. Second, the scale of local disease centers was weaker than that of central one in both man-power(eg. veterinarians), budget and so on, and was not enough to control the outbreak of the main animal diseases. Third, there were also insufficient incentives for livestock farmers to report notifiable animal disease. Finally, there was limitation in bury area and incineration facilities. To develop domestic animal industry, control of the disease and rearing of the environmentally friendly livestock farm are the main directions in Gyeong-In region, Production of high quality and safe livestock products is the most important factor to expand the livestock industry. Conclusively, local animal disease center with comparison to central one should be expanded to control the disease and develop the livestock industry in Incheon metropolitan city.
International Journal of Precision Engineering and Manufacturing
/
v.2
no.2
/
pp.38-47
/
2001
This paper decribes the development of computer-aided design of a very precise progressice die for lead frame of semiconductor chip. The approach to the system is based on knowledgr-based rules. Knowledge of fie이 experts. This system has been written in AutoLISP using AutoCAD ona personal computer and the I-DEAS drafting programming Language on the I-DEAS mater series drafting with on HP9000/715(64) workstation. Data exchange between AutoCAD and I-DEAS master series drafting is accomplished using DXF(drawing exchange format) and IGES(initial graphics exchange specification) files. This system is composed of six main modules, which are input and shape treatment, production feasibility check, strip layout, data conversion, die layout, and post processing modules. Based on Knowledge-based rules, the system considers several factors, such as V-notches, dimple, pad chamfer, spank, cavity punch, camber, coined area, cross bow, material and thickness of product, complexities of blank geometry and punch profiles, specifications of available presses, and the availability of standard parts. As forming processes and the die design system using 2D geometry recognition are integrated with the technology of process planning, die design, and CAE analysis, the standardization of die part for lead frames requiting a high precision process is possible. The die layout drawing generated by the die layout module s displayed in graphic form. The developed system makes it possible to design and manufacture lead frame of a semiconductor more efficiently.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.