• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.769-775
• /
• 2021

The objective of this research was to analyze the factors influencing the farm-gate shrimp prices in Thailand using monthly time series from January 2001 to December 2019. The econometric methodology was employed to satisfy the purpose, consisting of the cointegration test for revealing the long-run relationship and equilibrium elasticity between the variables as well as the error correction model for detecting speed adjustment to shock responses. The empirical results revealed that (1) the export shrimp prices, shrimp production in the country, and shrimp export volume indicated a long-run relationship running to the farm-gate shrimp prices in Thailand with the size of equilibrium elasticity equal to 1.083%, -0.256%, and 0.123, respectively, and (2) the farm-gate shrimp prices in Thailand would adjust to the equilibrium line with a speed equal to 20.147% if there was any kind of incident or shock which caused the relationship to deviate from the equilibrium point. There was no relationship in terms of global shrimp prices and the exchange rate for farm-gate shrimp prices in Thailand. The recommendations should emphasize the varieties of shrimp products for export to other countries beyond the main trading markets nowadays to reduce risks and fluctuations in the export prices of shrimp products.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.11a
• /
• pp.173-174
• /
• 2004

The Great Wall is an element in University which stand outs as a landmark. The Great Wall is located in front of the grand staircases of the gymnasium in the main gate area. Falling water and Lights shows a spectacle panorama in various point of view. Water falls down the top of the grand staircases and the front walls. And the red, blue and green lights brighten the falling water in the evenings. Also the relief of the palm tree and turtle symbolizes the University Identity. The wall is comprehends not only the day and the night but four seasons. The Water, Lights, and the Relief are coordinates well along with the new building in campus.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.2
• /
• pp.27-34
• /
• 2015

As part of the waterway restoration to renew traditional urban area, this paper is to assume and research Gyoseocheon(Gyoseo waterway) in Late 1960s Cheongju Korea. The main stream of Gyoseocheon flew from Sangjwagol(the head of the valley) of Uam Mt. to the north gate under Cheongju castle at first, and meandering from Sangdang Park, flew through Sudongseongdang and Bangadari Road to Musimcheon since open railroad of 1920s. This waterway, the eco-friendly figure of Gyoseocheon, that flew to inside the downtown with a planted tree and that is open space was so. The sub stream of Gyoseocheon originated in Seoundong and Tapdong were divided into two parts. One was to join the main stream of Gyoseocheon on Sangdang Park via Munhwadong, and the other was to join the sub stream of Musimcheon at northwest corner via south and west gate of Cheongju castle. This waterway as branch sewer were built into the road culvert.

• Wind and Structures
• /
• v.1 no.1
• /
• pp.67-75
• /
• 1998

Tiger Gate Bridge, a steel suspension bridge with a main span of 888 m and a stiffening box girder, is located at the Pearl River Estuary, Guangdong Province, one of the typhoon-prone area in China. Focusing on the developing of the full aeroelastic model of the bridge and simulation of the wind field of the bridge site in a large boundary wind tunnel at Tongji University, Shanghai, China, some main results about the wind resistant properties of the bridge including aerodynamic instability, buffeting responses both being in operation and erection stages by using of a full aeroelastic model wind tunnel testing are introduced. Some of analytical approaches to those aerodynamic behaviours are also presented, and compared with experimental data of the testing.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1085-1087
• /
• 1995

A large leakage current may be one of the critical issues for poly-silicon thin film transistors(poly-Si TFTs) for LCD applications. In order to reduce the leakage current of poly-Si TFTs, several offset gated structures have been reported. However, those devices, where the offset length in the source region is not same as that in the drain region, exhibit the asymmetric electrical performances such as the threshold voltage shift and the variation of the subthreshold slope. The different offset length is caused by the additional mask step for the conventional offset structures. Also the self-aligned implantation may not be applicable due to the mis-alignment problem. In this paper, we propose a new fabrication method for poly-Si TFTs with a self-aligned offset gated structure by employing a photo resistor reflow process. Compared with the conventional poly-Si TFTs, the device is consist of two gate electrodes, of which one is the entitled main gate where the gate bias is employed and the other is the entitled subgate which is separate from both sides of the main gate. The poly-Si channel layer below the offset oxide is protected from the injected ion impurities for the source/drain implantation and acts as an offset region of the proposed device. The key feature of our new device is the offset lesion due to the offset oxide. Our experimental results show that the offset region, due to the photo resistor reflow process, has been successfully obtained in order to fabricate the offset gated poly-Si TFTs. The advantages of the proposed device are that the offset length in the source region is the same as that in the drain region because of the self-aligned implantation and the proposed device does not require any additional mask process step.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1B
• /
• pp.89-98
• /
• 2006

In this study, a method for flood runoff analysis in main channel connected with interior floodplain, is applied for evaluation of hydraulics of Sapgyo lake for the purpose of flood protection by considering tidal effect of West Sea and runoff from the watershed. Especially, operational condition of sluice gate was explicitly modeled in conjunction with various runoff scenarios from watershed. The change in hydraulics of main channel and interior floodplain was found to be predominantly affected by tidal effect, and explicit modeling of gate operation made possible the evaluation of hydraulic characteristics of different alternatives. Until now, such an analysis was not made due to the lack of models with such capability, however, with the proposed method, it is possible to perform such an analysis and is thought that the proposed method can be a valuable tool for flood protection planning.

• Journal of the Korean Institute of Rural Architecture
• /
• v.21 no.4
• /
• pp.53-60
• /
• 2019

The purpose of this study is to investigate the change of Hidden gates form with the times. Fortresses position is constructed on the Korea mountain ranges. Hidden gate, one of facilities to construct fortress among various factors, represents as route of supplies way, ask for rescue, or counterattack plan to come in. The shape of hidden gate changes depend on land form, function, and time period. Previous research partially based on archeology or history. This research analyze Namhan mountain Namhansansung, one of the highest hidden gates count in Korea, distributive by main fortress, Bong-am fortress, Hanbong fortress. Nahhan Mountain fortress repeatedly affected by King Injo in Joseon Dynasty. As a result, Nahhan Mountain fortress consist of hidden gates alternation depend on the time of establishment or extension which makes different shape or size.

• Progress in Superconductivity and Cryogenics
• /
• v.5 no.1
• /
• pp.44-47
• /
• 2003

There are several simulation programs in studying superconductor RSFQ (Rapid Single flux Quantum) electronic devices, which include WRspice, WinS, PSCAN, and JSIM. Even though different research groups use different simulation programs, it is not well known about which program gives the simulation results closer to the measurement values. In this work, we used both WRspice and WinS to simulate RSFQ OR gate and to compare the results from the different simulations. This comparison would help in deciding which program is better in the RSFQ circuit design. In the confluence buffer, which is the one of the main components of the DR gate, the measured bias margins were ${\times}23.2%$, while the margins from the simulations were ${\pm}35.56%$ from WRspice and it 53.1% from WinS. However, with the actual fabricated circuit parameters WRspice gave ${\pm}27%$. In WinS the circuit did not operate. We concluded that WRspice is more reliable.

• Journal of IKEEE
• /
• v.15 no.2
• /
• pp.143-148
• /
• 2011

MOS (Metal-Oxide Semconductor) devices among the most sensistive of all semiconductors to radiation, in particular ionizing radiation, showing much change even after a relatively low dose. The necessity of a radiation dosimeter robust enough for the working environment has increased in the fields of aerospace, radio-therapy, atomic power plant facilities, and other places where radiation exists. The power MOSFET (Metal-Oxide Semiconductor Field-Effect Transistor) has been tested for use as a gamma radiation dosimeter by measuring the variation of threshold voltage based on the quantity of dose, and a maximum total dose of 30 krad exposed to a $^{60}Co$ ${\gamma}$-radiation source, which is sensitive to environment parameters such as temperature. The gate oxide structures give the main influence on the changes in the electrical characteristics affected by irradiation. The variation of threshold voltage on the operating temperature has caused errors, and needs calibration. These effects can be overcome by adjusting gate oxide thickness and implanting impurity at the surface of well region in MOSFET.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.3
• /
• pp.50-54
• /
• 2001

Manufacturing is characterized by increasing product variety and technical complexity, decreasing levels of demand, expanding global competition and declining profitability of organizations. To survive in such a complex environment, development of the automatic design system into design and manufacturing can be introduced to increase the flexibility and adaptability to markets. This paper presents the development of an automatic water-gate design system that composed of a main program and three modules, and was programmed by AutoLISP language under AutoCAD system. The devel-oped system is capable of generating water-gate design automatically according to input data as customer requirement.