• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.27-37
• /
• 2014

PURPOSES : The purpose of this study is to verify the causes of surface scaling at L-shoulder concrete structure. METHODS : From the literature reviews, mechanisms of frost damage were studied and material properties including strength, air void, spacing factor and scaling resistance of L-shoulder concrete structure were analyzed using core specimens taken by real fields. RESULTS : The spacing factor of air void has relatively high correlation of surface conditions : lower spacing factor at good surfacing condition and vice versa. If the compressive strength is high, even thought spacing factor does not reach the threshold value of reasonable durability, the surface scaling resistance shows higher value. Based on these test results, the compressive strength also provide positive effect on the surface scaling resistance. CONCLUSIONS : The main causes of surface scaling of L-shoulder could be summarized as unsuitable aid void amount and poor quality of air void structure. Secondly, although the compressive strength is not the governing factor of durability, but it shows the positive effect on the surface scaling resistance.

• Journal of Families and Better Life
• /
• v.9 no.1 s.17
• /
• pp.223-239
• /
• 1991

The purpose of this study is to develop the scale which measure father's child rearing behaviors and to identify the demographic variables related. The subjects of this study are 1054 primary school children's fathers in Busan. Questionnaires anr distributed in order to collect data. The dta were analyzed by t-test, F-test, Pearson's ${\gamma}$, Duncan's Multiple Range test, factor analysis and Cronbach's ${\alpah}$ using the SPSS computer program. The main results were as follows ; 1) To make the scale, primary the men, standard deviation, relative frequency distribution of the each items, and Cronbach's were computed. As the result, 36 item were selected in father's child rearing behaviors. Secondarily, the procedure of factor analysis was applied. Consequently, 5 subscales 29 items were selected. Total variance of 5 subscals was 87.5%. Reliability of scales was computed by Cronbach's ${\alpah}$ and the level was relatively considered satisfactory. Hence, subscales named runs and follow ; Father's Child Rearing Behaviors Scale consists of factor I- 'encouragement', factor II-'autonomy', factor III-'affection', factor IV-'achievement', fctor V-'interest'. 2) Practically, to applicate the scale, difference test were conducted according to sex of the children, jobs of the parents, ages of parents, level of the parent education and SES in father's child rearing behavior. As the result, there were variously differences according to demographic variables.

• Journal of Information Technology Services
• /
• v.6 no.2
• /
• pp.63-80
• /
• 2007

In this paper, the function factors contributing to ITA/EA functions in their organizations, are suggested. Also the reasons to the construction of IT governance system and their effects on the their organizations are discussed and the relationships are verified by empirical model. From the survey, the data of the 227 respondents were collected and regression analysis was performed for validating the research model. ITA/EA functions consist of the IT infrastructure systemization, ITA/EA business process support, IT investment efficiency factors. And the factors of IT resource and performance management, IT process management, IT service management are included to IT governance. The main analysis results described significantly are shows as follows. At first, IT resource and performance management factor is effected by the ITA/EA business process support factor and IT investment efficiency factor. In similarly, IT service management factor is also affected by the factors such as ITA/EA business process support, IT investment efficiency, and IT infrastructure systemization. In additional analysis, IT investment efficiency factor in official sectors, ITA/EA business process support factor in private sectors respectively are described as the significant factors on the IT governance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.960-965
• /
• 2014

Transmission loss of specimen is calculated by measuring energy of incident and transmission and using reverberant room of large size. But normal measurement of transmission loss has trouble because it is actually demanded that large area and specimen of certain size is satisfied with condition of diffused sound field. Especially, in case of mechanical component, interested frequency band is mid-frequency band between 500 ~ 2k Hz, and it is used to be available to minimize a reverberation chamber under conditions satisfying acoustic one because production of specimen for transmission loss measurement has limit. But, as in semi-reverberation room, it is difficult to satisfy condition of diffuse sound field and modification factor is applied to complement that. Correction factor when measuring transmission loss using semi-reverberation chamber is required accuracy because it works as main factor determining reliability of reuslts on transmission loss. In this study, it is analyzed that an effect on correction factor based on varying materials and sizes of specimens in order to deduction of it. Also It is confirmed that applied by elicited correction factor with actual railway vehicle's floor has reliability.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.2
• /
• pp.109-115
• /
• 2005

Recently, the needs and concerns regarding power loss have been increasing according to energy conservation at the level of the national policies and the business strategies of power utilities. In particular, the issue of power loss is the main factor for determining rates for electrical consumption in the deregulation of the electrical industry. However, because of the lack of management for power loss load factors (LLF) it is difficult to make a calculation for power loss and to make a decision concerning the electric rates. Furthermore, loss factor (k-factor) in Korea, which is of primary significance in the calculation of distribution power loss, has been used as a fixed value of 0.32 since the fiscal year 1973. Therefore, this study presents the statistical calculation methods of the loss factors classified by load types and seasons by using the practical data of 65 primary feeders that have been selected by appropriate procedures. Based on the above, the algorithms and methods, as well as the optimal method of the distribution loss management classified by facilities such as primary feeders, distribution transformers and secondary feeders is presented. The simulation results demonstrate the effectiveness and usefulness of the proposed methods.

• Research in Community and Public Health Nursing
• /
• v.12 no.1
• /
• pp.239-246
• /
• 2001

This paper attempts to identify the occupational stress-related factors among the workers at the manufacturing industry and to provide the basic data concerning development of stress management program focused on the manufacturing industry. The subjects exhibit significantly highest level of 'the characteristics of task and participation in decision making factor'. And the mean score of 'the avoid coping strategies' was higher than 'the control coping strategies'. The main factor that affected the occupational stress responses was 'the physio-environmental factor' and it was explained 15.6% out of the total variance of the stress responses. Also, it would be explained 29% out of the total variance of the stress responses with 'the characteristics of task/participation in decision making factor', sex, social support, and 'extra-organizational stressor'. In conclusion. For developing the stress management program in workplace, 'the physical environmental factor' and 'the characteristics of task and participation in decision making factor' should be considered. Also, It should be identified the direct and indirect paths among factors that significantly related factors to the occupational stress of workers further more.

• Journal of Genetic Medicine
• /
• v.13 no.2
• /
• pp.89-94
• /
• 2016

Purpose: Molecular genetic analysis is the main approach used for prenatal diagnosis of hemophilia A and B. However, in certain cases, such analysis is uninformative. In such situations, direct measurement of fetal coagulation factor levels is still the best option, and it may be the only option in some cases. This study was conducted to determine the normal ranges of mid-trimester cord blood factor VIII (FVIII) and IX (FIX) in a Korean population. Materials and Methods: Twenty-six FVIII samples and 29 FIX samples were assayed in fetal cord blood acquired by ultrasound-guided cordocentesis. Sampling was conducted during gestational ages of 19-24 weeks. Results: The mean and standard deviations for FVIII and FIX activity were $45.5{\pm}30.5%$ and $19.9{\pm}12.2%$, respectively. Ranges for FVIII and FIX were 1.5-125.0% and 6.0-52.0%, respectively. Conclusion: Our study revealed the normal ranges and lowest level of factor VIII and factor IX in non-affected normal fetus by fetal cord blood sampling during the mid-trimester in a Korea population. The factor assay of the fetal cord blood is invasive but feasible and provides important basic data related to hemophilia.

• Women's Health Nursing
• /
• v.25 no.1
• /
• pp.31-45
• /
• 2019

Purpose: This study was designed to develop a valid and reliable scale for the evaluation of preconception health behavior in women preparing for pregnancy. Methods: The initial strategy included a literature review, interviews, and construction of a conceptual framework. The preliminary items were evaluated twice for content validity by experts, and modified two preliminary investigations. Participants in the 2 main investigations and the confirmation investigation were tested for reliability and validity of the preliminary scale in women preparing for pregnancy. The data were analyzed for different items exploratory and confirmatory factors. Results: The 5-point Likert scale consisted of 6 factors and 27 items. The 6-factors included 'hazardous substance factor,' 'medical management factor,' 'rest and sleep factor,' 'stress management factor,' 'information acquisition factor,' and 'resource preparation factor.' Goodness of fit of the final research model was very appropriate and based on the following measures: Q=1.98, comparative fit index=.91, Tucker-lewis index=.89, standardized root mean square residual=.07, and root mean square error of approximation=.07. The criterion validity was .64. The reliability coefficient was .92 and the test-retest reliability was .61. Conclusion: The study findings indicate that the scale can be used for the development of nursing interventions to promote preconception health behavior in women preparing for pregnancy.

• Earthquakes and Structures
• /
• v.16 no.6
• /
• pp.655-664
• /
• 2019

Behavior factor of a structure plays a crucial role in designing and predicting the inelastic responses of it. Recently, irregular buildings have been interested in many designers. To design irregular structures, recognizing the inelastic behavior of them is necessary. The main objective of this study is to determine the behavior factor of irregular Reinforced Concrete Moment Resisting Frames (RCMRFs) via nonlinear Incremental Dynamic Analysis (IDA). To do so, first, several frames are designed according to the regulations of the Iranian national building code. Then the nonlinear incremental dynamic analysis is performed on these structures and the behavior factors are achieved. The acquired results are compared with those obtained using pushover analysis and it is shown that the behavior factors acquired from the nonlinear incremental dynamic analysis are somewhat larger than those obtained from pushover analysis. Eventually, two practical relations are proposed to predict the behavior factor of irregular RCMRFs. Since these relations are based on the simple characteristics of frames such as: irregularity indices, the height and fundamental period, the behavior factor of irregular RCMRFs can be achieved efficiently using these relations. The proposed relations are applied to design of four new irregular RCMRFs and the outcomes confirm the accuracy of the aforementioned relations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.1
• /
• pp.71-76
• /
• 2008

The main ports of Korean south sea are exposed to intensive danger as 58.1% of total vessel in Korea waters and 62.9% of total dangerous cargo ships. Therefore, it is required to establish fundamental database to solve numerous issues at the main ports cf the south sea as studying amount of the vessel traffic and their flows into the main ports, and evaluating degree of danger by traffics environmental stress model as analyzing relationships among degree of danger, maritime accident, and number of vessel arriving or departing in the main ports.