• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.281-283
• /
• 2006

This paper presents the reduction methods of penetrated electromagnetic fields through a narrow slot aperture in a planar conducting screen of infinite extent. When a plane wave is excited to the narrow slot, the aperture electric field is controlled by the resistive sheets loading on the slot. The magnitude of the penetrated electromagnetic fields through a narrow slot is controlled by electric field distributions on the slot aperture. The results show that the magnitude of the penetrated electromagnetic field can be effectively reduced by the resistive sheets on the slot aperture.

• Proceedings of the KIPE Conference
• /
• 1996.06a
• /
• pp.109-112
• /
• 1996

In this paper, we composed utility interactive photovoltaic generation system of current source inverter, and controlled that low harmonic and high power factor are hold by supposing control and compensation method which is concerned with synchronous signal distortion and modulation delay. And we put parallel resonant circuit into dc link, so, magnitude of direct reactance was reduce by restraining direct current pulsation which had accumulation of pulsating power in alternating electrolytic condenser. Also we controlled that modulation factor is operated around maximum output of solar cell.

• 한국컴퓨터산업교육학회:학술대회논문집
• /
• 2003.11a
• /
• pp.87-94
• /
• 2003

Anisotropic diffusion is a selective smoothing technique that promotes smoothing within a region instead of smoothing across boundaries. In anisotropic diffusion, the rate of smoothing is controlled by the local value of the diffusion coefficient chosen to be a function of the local image gradient magnitude. El-Fallah and Gary E. Ford represented the image as a surface and proved that setting the inhomogeneous diffusion coefficient equal to the inverse of the magnitude of the surface normal results in surface evolving speed that is proportional to the mean curvature of the image surface. This model has the advantage of having the mean curvature diffusion (MCD) render invariant magnitude, thereby preserving structure and locality. In this paper, the proposed MCD model efficiently reduces diffusion coefficient at the thin edges using the smoothness of the surface.

• Journal of Power Electronics
• /
• v.5 no.4
• /
• pp.329-334
• /
• 2005

The DSTATCOM(Distribution Static Synchronous Compensator) is one of the Custom Power Devices that can regulate voltage. The DSTATCOM operates as a shunt connected static var compensator whose capacitive or inductive output current can be controlled independent of the system voltage. The magnitude of the compensated voltage is limited by characteristics of the system and the load. Compensation capability of the DSTATCOM which can inject 1 MVAR reactive power was simulated by EMTDC under several conditions. This paper analyzes the effect of the DSTATCOM's compensation considering the length and kind of distribution line, the power factor and magnitude of the load, and the duration and magnitude of the voltage variation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.1 s.173
• /
• pp.232-239
• /
• 2000

The paper describes the parametric instability of free-free beams subjected to a controlled pulsating follower force. The beam has a tip rigid body not a mass point, and the direction of pulsating follower force is controlled by the direction control sensor. Equations of motion are derived by Hamilton's principle and the instability regions are obtained by finite element formulation. The effects of magnitude, rotary inertia, the distance between free end of the beam and the center of gravity of the rigid body on the instability types and regions are investigated by the change of the constant and periodic part of the follower force.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2324-2330
• /
• 2015

In blind signal processing in impulsive noise environment the maximum cross-correntropy (MCC) algorithm shows superior performance compared to MSE-based algorithms. But optimum weight conditions of MCC algorithm and its properties related with robustness to impulsive noise have not been studied sufficiently. In this paper, through the analysis of the behavior of its optimum weight and the relationship with the MSE-based LMS algorithm, it is shown that the optimum weight of MCC and MSE-based LMS have an equal solution. Also the factor that keeps optimum weight of MCC undisturbed and stable under impulsive noise is proven to be the magnitude controlled input through simulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.6
• /
• pp.506-513
• /
• 2001

The torque of an SRM depends on the phase current and derivative of inductance. But an SRM is difficult to control the desired torques because of saturation in magnetic circuit An SRM is controlled by parameters of input voltage, and switch on , off angle The switch on off angles of an SRM regulate the magnitude and shape of current waveform and decide the magnitude and shape of torque This paper proposes an the optimization control scheme by adjusting both the switch on an switch off angle . The switch off angles are decided by reference of efficiency using simulation and experiments. The switch on angles are decided by load torque , And the dwell angles are controlled for torque control and speed control using GA-neural network which is used to simulated the reasonable switching angle.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.1-7
• /
• 2017

The maximum zero error probability (MZEP) algorithm outperforms MSE (mean squared error)-based algorithms in impulsive noise environment. The magnitude controlled input (MCI) which is inherent in that algorithm is known to plays the role in keeping the algorithm undisturbed from impulsive noise. In this paper, a new approach to normalize the step size of the MZEP with average power of the MCI is proposed. In the simulation under impulsive noise with the impulse incident rate of 0.03, the performance enhancement in steady state MSE of the proposed algorithm, compared to the MZEP, is shown to be by about 2 dB.

• Korean Journal of Clinical Pharmacy
• /
• v.26 no.2
• /
• pp.163-171
• /
• 2016

Objective: A meta-analysis was performed to determine effect of ginseng on blood pressure. Methods: The databases of PubMed, Embase, Cochrane Library, RISS, DBpia, KISS, and Koreamed were searched for all published studies from inception to January 2016. The following terms were used: "ginseng", "hypertension", and "blood pressure". Using the Review Manager 5, mean differences (MDs) were pooled to measure the effect of ginseng on blood pressure compared to that of placebo. Results: Eleven randomized controlled trials were included. In this meta-analysis, ginseng treatment significantly lowered systolic blood pressure (SBP) in a dose-independent way (MD: -1.99, p = 0.04). In subgroup analysis, 8-12 week consumption of ginseng achieved significantly greater reduction in SBP (MD: -3.14, p = 0.03), while single administration of ginseng failed to show BP-lowering effect. When ingested over 8-12 weeks, ginseng significantly lowered diastolic blood pressure (DBP) (MD: -1.96, p = 0.03). No significant association was found between ginseng dose and the magnitude of BP-lowering effect. However, a significant positive relationship was observed between baseline SBP level and the magnitude of SBP reduction (r = 0.848, p = 0.033). Such a relationship was not seen in DBP. Conclusion: Consumption of ginseng for 8-12 weeks achieved significant reductions in SBP and DBP in a dose-independent way. There was a significant positive relationship between baseline SBP level and the magnitude of SBP reduction.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.4
• /
• pp.261-268
• /
• 1989

A novel current controlled PWM voltage source type converter and control strategy is proposed that is able to draw nearly sinusoidal current at unity power factor from three phase power lines. Current error vector control scheme is used which has two operating states : low harmonic current content state and quick current response state. The state is changed according to the current error to optimize the steady state and transient state performances. To regulate the dc oupput voltage, the magnitude of the reference current is determined by a controller dc voltage error. The ac input power factor can be controlled with unity, and even leading or lagging by adjusting the relative position of the reference current with respect to the supply voltage.