• Resources Recycling
• /
• v.11 no.4
• /
• pp.11-16
• /
• 2002

Analysis and separation of constituent materials of old car have been performed by using the industrial shredding line. For this aim, three old cars made by domestic automobile manufacturers, Sonata II, Sephia and Prince were chosen and delivered in pressed form without engine, tires and doors, etc. Shredding line was substantially composed of pre- and main-shredder. cyclone, magnetic separation, eddy current separation and man-power separation. From the separation of shredder products, iron scrap was observed to be the major material of old car accounting for 60.1 ％ of total weight and non-ferrous metals involving Al, Cu and Zn, etc. were about 2％. Light fluff, about 90％ of total fluff product, was comprised with plastic, fiber and sponge, etc. and the fraction of 5 cm undersize in light fluff was 70.5%. In case of heavy fluff, however. rubber and plastic were found to be the major constituent materials of it. Among the constituent materials of fluff, plastic showed the highest calorific value, more than 10,000 cal/gr and leather and rubber showed relatively high chlorine content, 10.3 and 2.55 wt%, respectively.

• Journal of the Korean Magnetics Society
• /
• v.7 no.1
• /
• pp.49-54
• /
• 1997

The effect of Co and annealing temperature on the magnetic properties, phase change and microstructure of melt-spun $(Nd_{14.73}Fe_{78.67}B_{6.60})_{100-x}Co_x$ (X=0, 1, 2, 3) ribbons has been studied. The Co containing ribbons were found to have higher coercivity ($_iH_c$) than the ribbons without Co. Intrinsic coercivity of 20.3 kOe has been obtained by addition of 2 at%Co. This effect by Co addition is also represented in the case of hot pressed and die-upseted magnets. The maximum intrinsic coercivities of hot press and die-upset $(Nd_{14.73}Fe_{78.67}B_{6.60})_{100- x}Co_x$ (X=0, 1, 2, 3) magnets are 16.9 kOe and 15.2 kOe when X=2.

• Journal of the Korean Magnetics Society
• /
• v.6 no.6
• /
• pp.411-416
• /
• 1996

We have studied the effect of a spin-dependence interface electron scattering on the giant magnetoresistance by adding a Fe magnetic material to the Co/Cu interfaces. The $Fe(50\;{\AA})/[Co(17\;{\AA})/Fe(t\;{\AA})/Cu(24\;{\AA})]_{20}$ multilayers are deposited on the Corning glass 2948 and 7059 substrates in a dc magnetron sputtering system. The magnetoresistance ratio is 22 % in the only Co/Cu multilayer, while it is increased to 26 % with inserted ultra thin Fe interface layer and reduced with increasing thickness of the Fe interface layer. It was investigated to the dependence of the magnetoresistance behaviors on annealing temperature. The magnetic properties of the multilayers were measured by vibrating sample magnetometer. Also, the structures and the surface roughness of samples were characterized by X-ray diffraction and atomic force microscope, respectively. The magnetoresistance ratio was increased to annealing temperature $300^{\circ}C$, but reduced at the temperature higher than $300^{\circ}C$ due to the interfacial diffuse.

• Journal of the Korean Magnetics Society
• /
• v.19 no.4
• /
• pp.126-132
• /
• 2009

We have studied physical properties of MnAs thin films grown by Molecular-Beam Epitaxy as well as their post-growth annealing effects. The samples grown at $600^{\circ}C$ show the preferred crystal orientation of type-B independent of substrate whereas type-A is observed for the samples grown at below $200^{\circ}C$. The sample grown at $600^{\circ}C$ on GaAs(001) substrate is magnetized to only one direction even on the easy axis of magnetization. The magnetic properties are vastly enhanced after post-growth annealing for both MnAs/Si(001) sample with no ferromagnetism and ferromagnetic MnAs/GaAs(001) grown at $200^{\circ}C$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.198-198
• /
• 2019

2011년 동일본 지역에서 발생한 지진으로 인하여 후쿠시마 다이이치에 위치한 원자력 발전소에서 다양한 방사성 물질들이 바다, 하천 그리고 대기와 같은 자연환경 속으로 유출되었다. 방사성 세슘(Cesuim, $Cs^{137}$)은 다양한 방사성 물질들 가운데 반감기(Half-life)가 30.17년으로 가장 긴 물질이다. 방사성 세슘이 환경 생태계로 한번 유출될 경우 긴 반감기과 널리 퍼지는 성질로 인하여 오랜 시간동안 넓은 지역에 막심한 피해를 초래하므로 효과적인 처리방법을 통해 안전하게 처리하는 것이 아주 중요하다. 세슘을 제거하기 위하여 물리적, 화학적, 생물학적 등 다양한 방법들을 통해 연구를 진행하고 있으며, 특히 세슘을 제거하는 아주 효과적인 방법 중 하나인 프러시안 블루(Prussian Blue, PB) 흡착제를 적용하는 방법이 많이 주목받고 있다. 그러나 프러시안 블루는 미세한 분말입자로서 수처리에 사용하게 되면 처리 후 발생되는 슬러지들을 수중으로 부터 분리하기 어려운 한계점을 가지고 있다. 최근 연구에서는 프러시안 블루의 적용 한계점를 극복하기 위하여 자성체(Magnetic substance)를 물리적 지지체로 이용하여 외부 자기장을 통해 수중으로 분리하는 방법들이 연구되고 있다. 자성체란 외부 자기장이 주어지게 되면 입자들 표면에 자성력을 띄는 물질들을 말한다. 본 연구에서는 자성체 종류들 가운데 가장 높은 자성력을 지닌 강자성체(Ferromagnetic Substance)를 물리적 지지체로 하여 산화과정, 실란과정, 합성과정을 거쳐 강자성체 입자의 표면에 프러시안 블루를 합성한 새로운 형태에 합성체를 제조하고, 제조된 합성체를 이용하여 수중에 존재하는 세슘 제거 능력을 평가하였다. 제조된 합성체의 물리적 특성을 분석하기 위하여 SEM, XRD를 이용하여 합성체 입자의 표면 분석을 진행하였다. 합성체의 세슘 제거 능력을 평가하기 위하여 임의 제조된 0.5mg/L의 세슘 농도를 가진 원수 100ml에 제조된 새로운 형태의 합성체 1g을 투입한 뒤 1분간의 반응시간 동안 반응한 이후 잔류 세슘을 측정한 결과 수중의 존재하는 세슘에 대해 99.9%의 세슘 제거율을 기록하였다. 자가분리(Magnetic Seperate)의 원리를 이용하여 수중으로부터 회수율을 측정한 결과, 99%의 합성체 회수율을 얻었다. 실험결과를 통해 외부자기장이 주어지게 되면 수중으로부터 합성체를 대부분 분리하여 회수할 수 있다고 판단된다. 본 연구를 통해 개발된 새로운 형태의 합성체는 수중의 세슘 처리 공정에서 사용자가 직접 접촉하지 않고 세슘제거 및 외부자기장을 통해 수중으로부터 분리가 가능한 합성체라고 판단된다.

• Journal of Korean Elementary Science Education
• /
• v.40 no.3
• /
• pp.326-342
• /
• 2021

In this study, experimental guide materials for teachers were developed so that algorithm expression, the core of computational thinking, can be applied to experimental activities. The experimental manuals presented in text was converted into an algorithmic form with a linear, branched, and repetitive structure according to the information visualization process using flowchart symbols. As an example, an experiment guide materials was developed by applying an algorithm expression to an experiment to find out the properties of a magnet. The developed experiment guide materials is different from the existing experiment guide materials expressed only sequentially in that it has an algorithmic structure of branching and repetition in which the suitability and judgment of information are expressed, and that the experiment process is visualized and expressed. It is expected that the experimental guide materials developed in this study will help teachers to understand algorithmic thinking and to implement experiments using it.

• Steel and Composite Structures
• /
• v.30 no.3
• /
• pp.281-292
• /
• 2019

In this paper, analysis of critical fluid velocity and heat transfer in the nanocomposite pipes conveying nanofluid is presented. The pipe is reinforced by carbon nanotubes (CNTs) and the fluid is mixed by $AL_2O_3$ nanoparticles. The material properties of the nanocomposite pipe and nanofluid are considered temperature-dependent and the structure is subjected to magnetic field. The forces of fluid viscosity and turbulent pressure are obtained using momentum equations of fluid. Based on energy balance, the convection of inner and outer fluids, conduction of pipe and heat generation are considered. For mathematical modeling of the nanocomposite pipes, the first order shear deformation theory (FSDT) and energy method are used. Utilizing the Lagrange method, the coupled pipe-nanofluid motion equations are derived. Applying a semi-analytical method, the motion equations are solved for obtaining the critical fluid velocity and critical Reynolds and Nusselt numbers. The effects of CNTs volume percent, $AL_2O_3$ nanoparticles volume percent, length to radius ratio of the pipe and shell surface roughness were shown on the critical fluid velocity, critical Reynolds and Nusselt numbers. The results are validated with other published work which shows the accuracy of obtained results of this work. Numerical results indicate that for heat generation of $Q=10MW/m^3$, adding 6% $AL_2O_3$ nanoparticles to the fluid increases 20% the critical fluid velocity and 15% the Nusselt number which can be useful for heat exchangers.

• Journal of the Korean Physical Society
• /
• v.73 no.12
• /
• pp.1863-1866
• /
• 2018

The sodium-iron phosphate maricite-$NaFe_{0.9}Mn_{0.1}PO_4$ was synthesized using the ball mill method. The crystal structure and magnetic properties of the prepared materials were studied using X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and $M{\ddot{o}}ssbauer$ spectroscopy. Structural refinement of maricite-$NaFe_{0.9}Mn_{0.1}PO_4$ was analyzed using the FullProf program. From the XRD patterns, the crystal structure of maricite-$NaFe_{0.9}Mn_{0.1}PO_4$ was found to be orthorhombic with the space group Pmnb. The lattice parameters of maricite-$NaFe_{0.9}Mn_{0.1}PO_4$ are as follows: $a_0=6.866{\AA}$, $b_0=8.988{\AA}$, $c_0=5.047{\AA}$, and $V=311.544{\AA}^3$. Maricite-$NaFePO_4$ has an edge-sharing structure that consists of $FeO_6$ octahedral. Under an applied field of 100 Oe, the temperature dependences of zero-field-cooled (ZFC) and field-cooled (FC) curves were measured from 4.2 to 295 K. $M{\ddot{o}}ssbauer$ spectra were also recorded at various temperatures ranging from 4.2 to 295 K. We thus confirmed that the $N{\acute{e}}el$ temperature of $NaFe_{0.9}Mn_{0.1}PO_4$ ($T_N=14K$) was lower than that of maricite-$NaFePO_4$ ($T_N=15K$).

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1338-1344
• /
• 2018

Band parameters and superconductivity of yttrium hypocarbide ($Y_2C$) have been investigated. The computations are performed using first-principles pseudopotential method within a generalized gradient approximation. The equilibrium lattice parameters have been determined and compared with experiment. Moreover, the material of interest is found to be stiffer for strains along the a-axis than those along the c-axis. A band-structure analysis of $Y_2C$ implied that the latter has a metallic character. The examination of Eliashberg Spectral Function indicates that Y-related phonon modes as well as C-related phonon modes are considerably involved in the progress of scattering of electrons. By integrating this function, the value of the average electron-phonon coupling parameter (${\lambda}$) is found to be 0.362 suggesting thus that $Y_2C$ is a weak coupling Bardeen-Copper-Schrieffer superconductor. The use of a reasonable value for the effective Coulomb repulsion parameter (${\mu}^*=0.10$) yielded a superconducting critical temperature $T_c$ of 0.59 K which is comparable with a previous theoretical value of 0.33 K. Upon compression (at pressure of 10 GPa) ${\lambda}$ and $T_c$ are increased to be 0.366 and 0.89 K, respectively, showing thus the pressure effect on the superconductivity in $Y_2C$. The spin-polarization calculations showed that the difference in the total energy between the magnetic and non-magnetic $Y_2C$ is weak.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.387-419
• /
• 2005

Material characteristics and provenance interpretation of the raw materials for the stone moulds of bronze artifacts excavated in Galdong Prehistoric site were studied. The stone moulds are made of igneous hornblendite with coarse-grained holocrystalline textures. The surface color shows greenish grey to dark green with greasy luster. The value of magnetic susceptibility of the moulds ranges from 19.2 to 71.0 (mean ; $39.2{\times}10^{-3}$ SI unit).High value of magnetic susceptibility indicates high contents of magnetite as a ferromagnetic mineral and the wide range of the values are due to heterogeneous distribution of magnetite. These are characteristics of basic igneous rocks. The rock-forming minerals of the moulds mainly consist of amphibole, plagioclase and biotite. Pyroxene, chlorite and opaque minerals are also rarely present. A large quantity of carbon was detected on the dark black crust near the surface of the moulds by quantitative analysis. Geological field survey was carried out to identify a source of the raw materials of the stone moulds around Galdong site. Hornblendite or gabbroic rocks being similar to the moulds forming rock occur at Daeseongri, Sikcheonri and Gyodongri in Jangsoo, and Illdaeri in Namwon about 50 kilometers away from the site in a straight line. They have similarity with the moulds forming rock in magnetic susceptibility ranging from 16.1 to 72.4 (mean ; $39.9{\times}10^{-3}$ SI unit). Among those hornblendite or gabbroic rocks, one in Jangsoo area is the most similar to the moulds forming rock on the basis of petrological and mineralogical characteristics. Comparing normalized patterns of major, minor, rare earth and immobile elements contents of the moulds to them of hornblendite in Jangsoo area, geochemical evolution trend and behavior characteristics show affinities between them. It suggests that the moulds forming rock and hornblendite in Jangsoo area have been originated from cogenetic magma. This hornblendite is easy to engrave an inscription or detail graphics on the surface because of its softness, and has good thermal conductivity. Hornblendite in Sikcheonri, Jangsoo is particularly produced and used for stone wares until the present day. Therefore, it is probable that the stone materials of the moulds has been imported from Daeseongri, Sikcheonri and Gyodongri in Jangsoo area. However, it cannot be completely excluded the possibility that the material of the moulds was supplied from Illdaeri in Namwon area appearing the same type of hornblendite on a small outcrops. It is necessary to carry out further archaeological studies to identify several possibilities of migration process of raw materials.