• Journal of Magnetics
• /
• v.1 no.1
• /
• pp.24-30
• /
• 1996

The relationship between effective permeability and the remanence ratio of an Fe-based amorphous alloy (Metglas 2605S3A) is investigated over a wide frequency range, in an effort to understand magnetization behavior of the alloy. In the frequency range from 1 to 200 kHz, the permeability is maximum at the remanence ratio of 0.4-0.5 and, at frequencies over 500 kHz, the correlation with negative coefficients emerges indicating that the permeability decreases with the remanent ratio, except for the ribbon coated with an insulating layer of MgO which exhibits both high values of the effective permeability and remanence ratio. It is considered from the correlation results that the boundary at which the dominant magnetization mechanism changes from domain wall motion to spin rotation is near 500 kHz. The core loss is also investigated as a function of annealing time when the samples are annealed at a fixed temperature of $435^{\circ}C$. The core loss in most cases decreases with the annealing time, the degree of the loss may consist of the hysteresis loss and anomalous eddy current loss. The two loss components are considered to be of similar magnitudes at low frequencies while, at high frequencies, the dominant contribution to the total loss is the anomalous loss.

• Journal of the Korean Magnetics Society
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2000

Amorphous Fe$_{79.7}$Si$_{9.3}$B$_{9.7}$Ni$_{1.4}$ ribbon alloys were fabricated by a single roll method. To enhance D. C. bias properties, the magnetic and micro-structural changes have been investigated as the variation of annealing time and condition. The D. C. bias properties were found to be directly related to micro-structural changes. Primary ${\alpha}$-Fe dendrites with 200∼300 nm showed the best D. C. bias properties, which resulted from the magnetic domain wall pinning effect. Due to the differences of cooling rate, the growth shape and distribution of the dendrites is divided into two areas.

• Journal of the Korean Magnetics Society
• /
• v.10 no.2
• /
• pp.49-52
• /
• 2000

The changes of magnetic properties in neutron irradiated F $e_{81}$ $B_{13.5}$S $i_{3.5}$ $C_2$ amorphous ribbon were studied by X-ray diffraction, hysteresis loop, temperature dependence of magnetization and complex permeability. The fluences of thermal ( $n_{th}$) and fast ( $n_{f}$) neutron were 6.95$\times$10$^{18}$ $n_{th}$ c $m^{-2}$ and 4.56$\times$10$^{16}$ $n_{f}$c $m^{-2}$ , respectively. The changes of XRD Profiles were not observable at the neutron irradiated sample. The complex permeability spectra showed that the permeability from domain wall motion decreased due to the increase of pinning force against domain motion by the neutron irradiation, and the relaxation frequency of rotational magnetization moved to higher frequency region. The measurement of hysteresis loop showed the increase of magnetic softness, related to rotational magnetization, but saturation magnetization was decreased in neutron irradiation sample. The Curie temperature was decreased in the neutron irradiated sample.e.e.e.

• Korean Journal of Materials Research
• /
• v.5 no.4
• /
• pp.483-489
• /
• 1995

Nd-(Fe, Co)-B합금에 Ni, Al, Ti등을 복합치환하여 그에 따른 산화거동과 자기적 성질의 변화를 조사하였다. 이들 리본의 산호거동은 parabolic한 거동을 나타내고 있으며, Ni 첨가시 매우 낮은 산화량을 나타내었다. 또한 산화된 리본은 Nd-rich상의 우선적 산화에 의해 표면에 요철이 관찰되었으며 Ni 첨가시 그러한 요철은 많이 줄어들었다. 표면의 산화층은 Nd산화물이었고, 이는 입계에 있는 Nd-rich상이 산화되고 이것이 확산 통로로 작용하였다고 생각된다. 산화가 진행됨에 따라 입계상에 의한 domain wall pinning이 약해져 자기특성이 저하하였다. 그러나 Ni 첨가시 이러한 산화거동이 크게 억제되었으며 Ni의 첨가는 Nd-rich상의 산화저항성을 증가시킴으로써 리본의 산화를 억제해 자기특성의 저하를 억제하였다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2009.05a
• /
• pp.154-155
• /
• 2009

• Journal of Magnetics
• /
• v.13 no.4
• /
• pp.167-169
• /
• 2008

The switching field of a 300 nm wide nanowire has been controlled by attaching a wide wire to it. The width of the wide wires varies from 700 nm to 2000 nm. While the connection of the two wires does not affect the switching field of the wide wires, it strongly affects the 300 nm-wire, resulting in a decrease of the switching field of the isolated wire from 175 Oe to 54 Oe when the 2000 nm-wire is connected to it. This result clearly shows that the switching field of the nanowire can be engineered by attaching a nucleation pad that has a different magnetic anisotropy.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2017.05a
• /
• pp.108-108
• /
• 2017

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.203.1-203.1
• /
• 2008

• Journal of the Korean Magnetics Society
• /
• v.8 no.1
• /
• pp.34-41
• /
• 1998

We have theoretically investigated torque curve shapes of simple uniaxial magnetic materials by considering conditions for round peaks to exist. These conditions are functions of an applied field, anisotropy field, ans lowest critical field $h_0$ for a domain wall to move or nucleate. The peak having a height of 2h appears when h is lower than h$_1$, the peak having a height of 1 appears when h is higher than h$_2$, ans two peaks having heights of 1 and -1 appear when h is higher than h$_3$. It was found that torque curves of simple uniaxial magnetic materials could be classified into 8 distinct types depending on the existence of hysteresis, the number of the round peaks, and the reversal mechanisms. Simple uniaxial magnetic materials also found to be classifed into the 5 groups depending on $h_0$.

• Journal of the Korean Magnetics Society
• /
• v.17 no.1
• /
• pp.14-17
• /
• 2007

Magnetic properties of transition metal doped $La_{0.5}Ca_{0.5}(Mn_{0.98}TM_{0.02})O_3$(TM=Cr and Ti) are studied. The samples are synthesized by the conventional solid-state method. Using vibrating sample magnetometer magnetization-temperature measurement were carried out with zero field cooling and field cooling at 50 Oe. Cr-doped sample shows cluster or spin glass like behavior while Ti doped does not. Curie temperature obtained were decreased from that of LCMO(245.5 K). Curie temperatures of Cr-doped and Ti-doped samples are 235.5 K and 232.7 K, respectively. The temperature-dependent coercivity $H_c(T)$ was also measured. The coercive force continuously decreases with the substitution of Cr and Ti, The result can be understood in terms of the interaction between defect and domain wall.