• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.218.2-218.2
• /
• 2014

그래핀은 높은 전기 전도도와 열전도도, 기계적 강도를 가지고 있고 동시에 높은 전자이동도($200,000cm^2{\cdot}V{\cdot}^1{\cdot}s{\cdot}^1$) 특성을 갖는 물질로써 차세대 소재로 각광받고 있다. 하지만 그래핀을 소자에 응용하기 위해서는 전사공정과 lithography 공정 과정에서 발생되는 PMMA(Poly methyl methacrylate) residue를 완벽하게 제거해야 하는 문제점이 있다. 특히, lithography 공정 중 완벽하게 PMMA residue 가 제거되지 않고 잔류해 있을 경우에 소자의 life time, performance에 악영향을 준다는 보고가 있다. 이와같은 문제를 해결하기 위해 화학적 cleaning, 열처리를 통한 cleaning, 전류 인가에 의한 cleaning과 같은 방법들을 이용하여 그래핀의 PMMA residue를 제거하는 공정들이 보고되고 있지만, 화학적 cleaning 방법의 경우 chloroform 이라는 독성물질 사용으로 인해 산업적으로 응용이 어렵고, 열처리 방법은 전극 등의 금속이 $200^{\circ}C$ 이상의 높은 온도에서 장시간 노출될 경우 쉽게 손상을 입으며, 전류 인가에 의한 cleaning 방법은 국부적으로만 효과를 볼 수 있기 때문에 lithography 공정 후 PMMA residue를 효과적으로 제거하기에는 한계를 보이고 있다. 본 연구에서는 Ar을 이용하는 Ion beam 시스템을 통해 beam energy를 제어함으로써 PMMA residue를 효과적으로 제거하는 연구를 진행하였다. 최적화된 플라즈마 발생 조건을 찾기 위해 QMS(Quadrupole Mass Spectrometer)를 이용하여 입사하는 ion energy와 flux 양을 컨트롤 하였고, 250 W에서 최적화된 ion energy distribution 영역이 존재한다는 것을 확인할 수 있었다. 또한, 25 Gauss 정도의 electro-magnetic field를 이용하여 Ar의 ion energy를 10 eV 이하로 낮추어 damage를 최소화함으로써 효과적으로 그래핀을 cleaning 할 수 있었다. Cleaning과정에서 ion bombardment에 의해 발생한 damage는 $250^{\circ}C$에서 6시간 동안 annealing 공정을 거치면서 회복되는 것을 Raman spectroscopy의 D peak ($1335cm{\cdot}^1$) / G peak ($1572cm{\cdot}^1$) ratio 로 확인할 수 있었고, PMMA residue의 cleaning 여부는 G peak ($1580cm{\cdot}^1$)의 blue shift와 2D peak ($2670cm{\cdot}^1$)의 red shift를 통해 확인하였다. 그리고 AFM (Atomic Force Microscopy)을 이용하여 cleaning 공정과정에서 RMS roughness가 4.99 nm에서 2.01 nm로 감소하는 것을 관찰하였다. 마지막으로, PMMA residue의 cleaning 정도를 정량적으로 분석하기 위해 XPS (X-ray Photoelectron Spectroscopy)를 이용하여 sp2 C-C bonding이 74.96%에서 87.66%로 증가함을 확인을 할 수 있었다.

• Membrane Journal
• /
• v.29 no.6
• /
• pp.308-313
• /
• 2019

In this study, the Fe₃O₄/porous carbon composite was synthesized by hydrothermal method for removal of Cu²⁺ ions and the characteristic of Cu²⁺ ions removal was performed. The Fe₃O₄/porous carbon composite was investigated via using SEM, XRD for its morphology and structure. BET analysis was conducted to conform a specific area and pore size distribution of the composite. For the investigation of the performance for removal of Cu²⁺ ions in the solution, UV-vis spectrometer was used. It suggests that a synergetic effect between magnetic Fe₃O₄ and porous carbon shows an improvement for removal of Cu²⁺ ions.

• The Journal of Pediatrics of Korean Medicine
• /
• v.24 no.3
• /
• pp.1-15
• /
• 2010

Objectives: By analyzing data of pediatric patients who had visited the emergency room of an oriental medical hospital, we can understand their characteristics and diseases. The purpose of this study was to introduce the excellence of Oriental medicine, to develop various treatments and to revitalize pediatric emergency care at oriental medical hospital. Methods: The study was composed of 371 pediatric patients who had visited the emergency room of the $\bigcirc\bigcirc$ university oriental hospital from January 2008 to December 2009. Results: 1. Average age of the pediatric patients was 4.28 years old, and it has showed that 1 to 3 years old patients (36.7%) were the most common age. 2. The number of pediatric patients was increased in June. According to the weekly distribution data, the number of pediatric patients who had visited on Sunday was the most (29.1%). Also, the number of pediatric patients who had visited ER for 18 to 21 hours(35.6%) were the most common. 3. The major problems of hospitalization were digestive symptoms and nervous symptoms. The nervous symptoms were the most at infancy. The musculoskeletal symptoms were the most common in adolescence. The digestive symptoms were common in other stages of development. 4. The time interval between arrival and onset; within 6 hours were the most(48.0%). Acupuncture and herbal medication treatment(75.2%) were the most common medical treatments. Most of the pediatric patients(97.3%) were discharged after medical treatments. Conclusions: Pediatric patients who had visited emergency room at the oriental medical hospital were mostly not due to acute form of serious diseases. The most common disease states that have preferred to treat with oriental medicine were dyspepsia, crying, febrile fit, and ankle sprain. We have to introduce the excellence of oriental medicine, and we need to try to develop other treatments such as magnetic acupuncture, moxa therapy, aroma therapy and revitalize pediatric emergency care at oriental medical hospital.

• Journal of Conservation Science
• /
• v.12 no.1 s.15
• /
• pp.31-47
• /
• 2003

The stone implements from the Unjeonri relic sites were studied on the basis of petrology, geochemistry and archaeogeological interpretations. Magnetic susceptibility (MS) of the stone implements were mainly lest than 0.5 $(10^{-3}\;SI\;unit)$, however, stone axe of syenitic rock (2.37), stone axe of schist (0.19) and stone knife of slate (0.11) showed different from the some measured rocks of an outcrop. Geochemical evolution trend of both a stone implement and the surface rock were identical when it a normalization to use the behavior, enrichment, compatibility and incompatibility of the elements. But, some rocks of a axe (schist), a knife (slate), a arrowhead (shale) could not confirm typical occurrence and the distribution area within the Unjeonri site and a radius 10 km. In the Unjeonri site, the stone implements suggest that coexisting two types as domestic- and foreign-type lithic artifacts.

• Analytical Science and Technology
• /
• v.5 no.2
• /
• pp.223-228
• /
• 1992

$Bi_2Sr_2Ca_2Cu_3Oy$-based superconductor phases were synthesized by the wet process using acetate precursors. Superconducting transition temperature ($T_c$) was determined from both measurements of electrical resistivity and magnetic susceptibility for the samples which were sintered at the temperatures of $850^{\circ}C$, $860^{\circ}C$, and $870^{\circ}C$ for 40 hours, respectively. The values of carrier concentration from Hall measurements were compared with $T_c$ data as a function of the sintering temperature. The formation mechanism of the superconducting phase was tentatively discussed on a basis of the distribution profile concept of the carrier concentration and the amount of superconducting phases in a ceramic bulk. This explanation may be supported by the experimental results of correlation between the relative amount of superconducting phases and the difference of $T_c$ values between superconducting onset temperature and cutoff temperature at each sintering temperature.

• Clinics in Shoulder and Elbow
• /
• v.19 no.2
• /
• pp.67-72
• /
• 2016

Background: The aim of this study was to analyze the questions in the shoulder and elbow section of the Korean Orthopaedic In-Training Examination (KOITE) and compare them with those of the US Orthopaedic In-Training Examination (US OITE). Methods: Twenty-nine questions in the shoulder and elbow section of the KOITE from 2010 to 2014 were analyzed and compared with those of the US OITE (80 questions) by literature review. A thorough analysis of the contents was performed after categorizing as topics, diagnostic tools, treatment modalities, taxonomic classification, and references. Results: The shoulder and elbow section of the KOITE was 5.8% weight which was similar to the US OITE (5.9%). The most commonly appearing topic was anterior labral injury (17.2%) on the KOITE compared to instability and arthritis (21.3%, each) on the US OITE. Magnetic resonance imaging was most frequently appeared imaging modality on the KOITE (41.0%) compared to the radiograph on the US OITE (43.0%). The Latarjet procedure was the most commonly asked treatment modality (22.2%) on the KOITE, whereas arthroplasty (33.3%) on the US OITE. The KOITE showed an even taxonomic classification distribution compared to the US OITE. Campbell's operative orthopaedics covered 96.6% questions as a reference on the KOITE compared to the Journal of Bone and Joint Surgery, American Volume on the US OITE, which covered 45.0%. Conclusions: This specific analysis shows us current trends of the shoulder and elbow section of the KOITE and it might be developed for use in the educational curricula for the trainee.

• Journal of the Korean Ceramic Society
• /
• v.30 no.4
• /
• pp.325-331
• /
• 1993

Aqueous solutions of metallic salts, ZrO(NO3)2.2H2O and Y(NO3)3.5H2O were used as raw materials to synthesize crystalline submicron spherical powders of Zr0.94Y0.06O1.97 with tetragonal crystal phase. Each aqueous solution was mixed on the magnetic stirrer to homogenize for 12 hours. The concentration of the mixed solutionwas changed from 0.01mol/$\ell$ to 0.1mol/$\ell$ calculated as the concentration of Zr0.94Y0.06O1.97. Ultrafine droplets of starting mixed solution were sprayed by the ultrasonic vibrator and carried into the furnace kept at 55$0^{\circ}C$, $650^{\circ}C$, 75$0^{\circ}C$ and 85$0^{\circ}C$ using carrier gas of air (10$\ell$/min) and pyrolysed to form Y-TZP fine powders. The results of this exeriment were as follows. 1) Synthesized powders were nonagglomerated and spherical type. 2) Particle size distribution was narrow between 0.1${\mu}{\textrm}{m}$ and 1${\mu}{\textrm}{m}$. 3) Forming reaction Y-TZP was finished above synthetic temperature 75$0^{\circ}C$. 4) As the synthetic temperature rised from 55$0^{\circ}C$ to 85$0^{\circ}C$, the mean particle size decreased from 0.35${\mu}{\textrm}{m}$ to 0.22${\mu}{\textrm}{m}$ in the concentration of starting solution with 0.02mol/$\ell$. 5) At 75$0^{\circ}C$ of synthetic temperature, the concentration changes of starting solution from 0.01mol/$\ell$ to 0.1mol/$\ell$ increased the mean particle size from 0.24${\mu}{\textrm}{m}$ to 0.38${\mu}{\textrm}{m}$. 6) Chemical compositions of each synthesized particle were homogeneous nearly.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.05a
• /
• pp.1-2
• /
• 2009

The high critical current ($I_c$, A) of SmBCO coated conductor in a magnetic field, the high production rate and the high material yield are promising for applications. The inhomogeneity of Ie at the long length coated conduct is very important problem for electric application. So we researched the reason of inhomogeneity of $I_c$ at long length tape prepared by batch type co-evaporation system called by EDDC. The long length SmBCO coated conductors were developed on $LaMnO_3/IBAD-MgO/Y_2O_3/Al_2O_3$/Hastelloy C276 template. The distribution of $I_c$ are from 0 to 397 A/cm at 77 K and self field. We have studied the microstructures of these films by using SEM, EDS and X-ray diffraction. The XRD and composition by EDS results of SmBCO film reveals subtle difference. But, the microscopic observation by SEM show the microcrack at the sample with low $I_c$.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.2
• /
• pp.111-117
• /
• 2019

We investigated the variations in the magnetic-field distribution and power transmission efficiency, resulting from changes in the relative positions of the transmitting and receiving coils, for electromagnetic-induction-type wireless power transmission using an elliptical receive coil. Results of simulations using a high-frequency structure simulator were compared to actual measurement results. The simulations showed that the transmission efficiency could be maintained relatively stable even if the alignment between the transmitting and receiving coils was changed to some extent. When the centre of the receiving coil was perfectly aligned with the centre of the transmitting coil, the transmission efficiency was the maximum; however, the degree of decrease in the transmission efficiency was small even if the centre of the receiving coil moved by ± 10mm from the centre of the transmitting coil. Therefore, it is expected that the performance of the wireless power transmission system will not be degraded significantly even if perfect alignment is not maintained. The results suggested a standardized application method of wireless transmission in the utilization of wireless power for implantable sensors.

• Journal of Magnetics
• /
• v.19 no.2
• /
• pp.126-129
• /
• 2014

We report the crystallographic and magnetic properties of $Ni_{0.3}Fe_{0.7}Ga_2S_4$ by means of X-ray diffractometer (XRD), a superconducting quantum interference device (SQUID) magnetometer, and a M$\ddot{o}$ssbauer spectroscopy. In particular, $Ni_{0.3}Fe_{0.7}Ga_2S_4$ was studied by M$\ddot{o}$ssbauer analysis for evidence of spin reorientation. The chalcogenide material $Ni_{0.3}Fe_{0.7}Ga_2S_4$ was fabricated by a direct reaction method. XRD analysis confirmed that $Ni_{0.3}Fe_{0.7}Ga_2S_4$ has a 2-dimension (2-D) triangular lattice structure, with space group P-3m1. The M$\ddot{o}$ssbauer spectra of $Ni_{0.3}Fe_{0.7}Ga_2S_4$ at spectra at various temperatures from 4.2 to 300 K showed that the spectrum at 4.2 K has a severely distorted 8-line shape, as spin liquid. Electric quadrupole splitting, $E_Q$ has anomalous two-points of temperature dependence of $E_Q$ curve as freezing temperature, $T_f=11K$, and N$\acute{e}$el temperature, $T_N=26K$. This suggests that there appears to be a slowly-fluctuating "spin gel" state between $T_f$ and $T_N$, caused by non-paramagnetic spin state below $T_N$. This comes from charge re-distribution due to spin-orientation above $T_f$, and $T_N$, due to the changing $E_Q$ at various temperatures. Isomer shift value ($0.7mm/s{\leq}{\delta}{\leq}0.9mm/s$) shows that the charge states are ferrous ($Fe^{2+}$), for all temperature range. The Debye temperature for the octahedral site was found to be ${\Theta}_D=260K$.