• 전기학회논문지
• /
• 제56권12호
• /
• pp.2157-2165
• /
• 2007

A novel design technology for a high frequency electronic ballast for metal-halide discharge lamps is proposed. A PFC technique is adopted to get unit power factor and output frequency alteration technique is adopted to avoid acoustic resonance. For characteristics evaluation, the designed electronic ballast is presented using normalized parameter. To reduce losses of the ballast. ZVS control technique is adopted and the maximum flux density of magnetic core for inductor should be kept lower. The electronic ballast for 250[W] metal-halide discharge lamp is implemented and 96[%] efficiency and low conducted EMI level are accomplished.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.242-244
• /
• 2006

본 논문은 LCD Backlight 인버터 구동 응용을 위한 다중 램프 점등 시 트랜스포머 소자 수 감소를 이를 수 있는 전류평형 트랜스포머의 구조 및 형상에 관한 것으로서, 제안된 트랜스포머 구조는 기존의 트랜스포머 구조 방식에 비해 소자 수가 줄어들어, LCD Backlight 인버터의 원가를 저감 할 수 있는 트랜스포머 구조 및 형상에 관한 것이다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.366-368
• /
• 2006

The conventional 3-Level LLC Converter using frequency-control has a disadvantage of designing magnetic components. To overcome this problem, a new constant frequency phase-shift controlled three-level LLC converter is proposed. Moreover, by employing voltage doubler type rectifier, an additional resonant capacitor is not needed. Therefore, this converter is promising for the high-power, high-voltage application with simple structure.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1382-1390
• /
• 2017

This paper presents a power supply for gate drivers, which uses a magnetic resonance wireless power transfer system. Unlike other methods where multiple antennas are used to supply power for the gate drivers, the proposed method uses a single antenna in an insulated receiver to make multiple mutually isolated power supplies. The power transmitted via single antenna is distributed to multiple power supplies for gate drivers through resonant capacitors connected in parallel that also block DC bias. This approach has many advantages over other methods, where each gate driver needs to be supplied with power using multiple receiver antennas. The proposed method will therefore lead to a reduction in production costs and circuit area. Because the proposed circuit uses a high resonance frequency of 6.78 MHz, it is possible to implement a transmitter and a receiver using a small-sized spiral printed-circuit-board-type antenna. This paper used a single phase-leg circuit configuration to experimentally verify the performance characteristics of the proposed method.

• 소음진동
• /
• 제7권2호
• /
• pp.311-317
• /
• 1997

In this paper the active vibration control system using a linear oscillatory actuator(LOA) is studied to suppress structural vibration. In the LOA, the AC-power-energized armature generates a shift field in an air gap, which produces a oscillating force to the mover in the magnetic field generated by high density permanent magnets. LOA has relatively simple structure with almost maintenance free, compared with a hydraulic actuator. Performance test of the active vibration control system using a LOA is carried out on a steel test structure under base excitation. From this test, it is confirmed that the acceleration level of the test structure is drastically reduced near the resonant region.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.104-107
• /
• 2007

Among the alternative energy sources, the solar energy is recognized as an important energy source and its application is increasing. Especially in future, the hybrid solar energy generation system with battery will be widely used as an independent distributed power generation system. In this paper, a solar power hybrid home generation system using a contact-less power supply (CPS) that can transfer an electric power without any mechanical contact by using magnetic coupling instead of the power transfer by directly supplying the DC power to the home electric system is proposed. The proposed system consists of a ZVS boost converter, a half bridge LLC resonant converter and contact-less transformer.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.103-107
• /
• 2002

A contact-less power supply system (CPS) allows electrical energy to supply to mobile consumers without any electrical or mechanical contact. CPS works in the same principle as a transformer, with the track litz cable forming the primary circuit and the pickup as the secondary. The track power supply generates the high frequency alternating current in the track cable. The captured AC magnetic field generated by the track conductors produces electrical energy in the pickup coil and the pickup rectifier converts the high frequency AC power to DC while regulating the power to the load. This paper presents the theoretical analysis, simulation and experiment리 results of the series-parallel resonant converter working as contact-less power supply system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.7-8
• /
• 2014

본 논문은 다이폴 코일 공진방식(DCRS, Dipole Coil Resonant System)을 사용한 원격 무선전력전송 개발 사례를 소개한다. 제안된 다이폴 코일 공진방식은 기존의 자기결합 공진방식(CMRS, Coupled Magnetic Resonance System)에 비하여 송신, 수신코일로만 이루어진 간단한 코일 구조와 작은 부피를 가지며, 공진도 Q를 100이하로 설계하여 주변 환경 변화에 강인한 전력전달 특성을 가진다. 본 논문에서는 원전 중대사고 시 격납건물 필수계측기용 소형 비상전원으로 개발된 10W급 7m 원격 무선전력전송 장치의 구성 및 설계과정을 제시한다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권4호
• /
• pp.483-491
• /
• 2012

It is expected that, in the future, DC power service will be widely used for photovoltaic home power generation systems, since DC consuming devices are ever increasing. Instead of using multiple converters to convert DC to AC and then AC to DC, the power service could solely be based on DC. This would eliminate the need for converters, reducing the cost, complexity, and possibly increasing the efficiency. However, configuration of direct DC power service with mechanical contacts can cause spark voltage or an electric shock when the switch is turned on and off. To solve these problems, in this paper, a contactless power supply for a DC power service that can transfer electric power produced by photovoltaics to the home electric system using magnetic coupling instead of mechanical contacts has been proposed. The proposed system consists of a ZVS boost converter, a half-bridge LLC resonant converter, and a contactless transformer. This proposed contactless system eliminates the use of DC switches. To reduce the stress and loss of the boost converter switching devices, a lossless snubber with coupled inductor is applied. In this paper, a switching frequency control technique using the contactless voltage sensing circuit is also proposed and implemented for the output voltage control instead of using additional power regulators. Finally, a prototype consisted of 150W boost converter has been designed and built to demonstrate the feasibility of the proposed contactless photovoltaic DC power service. Experimental results show that 74~83% overall system efficiency is obtained for the 10W~80W load.

• 한국전자파학회논문지
• /
• 제14권6호
• /
• pp.655-662
• /
• 2003

유전체 봉이 삽입된 원통형 공진기의 정밀한 필드 해석이 비소멸 모드와 컨투어 그래프 방법에 의해 제안되었다. 공진주파수들과 저차 모드들이 유전체 봉이 삽입된 원통형 공진기에 대해 계산되었다. 공진기의 설계를 위해 모드 차트가 제안되었다. 비소멸 모드 해석을 사용하여 하이브리드 모드들(TE, TM, HEM 모드)이 상세하게 해석되었고, 모드 차트를 완성하였다. 이론적 타당성은 실험에 의해 확인하였다. 이론과 실험 결과는 전반적으로 만족하였다. TE 모드, TM 모드, HEM 모드의 실험값과 이론값의 평균 오차는 각각 0.20 %, 0.14 %, 0.28 %이다.