• 한국자기학회지
• /
• 제1권2호
• /
• pp.31-36
• /
• 1991

스퍼터링에 의해 형성된 비정질 Co/sub 87/Zr/sub 4/Nb/sub 9/ 박막을 TEM과 EDS로 분석하여 박막의 구조적 그리고 저성적 불균일성을 관찰하였다. 특히 기판 bias를 가한 상태에서 제조된 박막을 회전 자장 열처리했을 때는 Co-rich 지역과 (Zrnb) oxied-rich 지역의 조대한 조직으로 분리되었으며, 이러한 박 막의 자기적 특성은 'ultra-soft'한 성질을 나타내었다. Ulta-soft함 박막은 H/sub c/=0.18 Oe, H/sub k/ = 0.55 Oe, M/sub r//M/sub s/=0.75의 자기적 특성과 overdamping된 고주파특성, 그리고 외부자계에 대한 자화율 변화곡선이 가역적이고 연속적이라는 특이한 현상을 보인다. 조성적으로 불균일한 박막의 ultra-soft 한 특성은 Co-rich 입자들이 exchange coupling energy와 magnetostatic coupling energy를 최소화 하기 위해 만드는 vortex형의 자화분포로써 설명되었다. 즉 vortex 는 여러개의 co-rich 입자들로 형성 되어있는 것으로 추정되며, 수평, 수직방향으로의 반자장 계수(demagnetizing factor)가 각각 flux closure 와 flux reversal에 의해 무시되기 때문에 vortex로 부터 CoZrNb 박막의 ultra-soft 특성을 설명할 수 있었다.

• 한국통신학회논문지
• /
• 제35권7C호
• /
• pp.611-617
• /
• 2010

본 논문에서는 직렬 연접 길쌈 부호와 LDPC 부호를 이용하여 수직자기기록 채널에서의 성능을 조사하였다. 실험과정에서 기록 밀도는 1.7, 2.0, 2.4, 2.8 일 때를 각각 실험하였다. 직렬 연접 길쌈 부호는 LDPC 부호보다 복호기의 구현 복잡도가 더 낮다. 직렬 연접 부호는 순환 구조적 길쌈 부호의 부호기와 복호기, 그리고 프리코더와 인터리버로 이루어져 있다. 본 실험에서 직렬 연접 길쌈 부호의 복호 알고리즘은 메시지 전달 알고리즘을 이용하였으며, LDPC 부호의 복호 알고리즘은 Sum Product 알고리즘을 이용하였다. 신호 검출기와 오류정정부호 사이에 반복 복호 기법을 적용한 터보등화기 기법을 적용하였고, 기록 밀도가 높아짐에 따라 직렬 연접 길쌈 부호가 LDPC 부호 보다 더 효율 적인 것을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1268-1270
• /
• 1995

A method using photoelectric effect of a single-mode optical fiber, with a 632.8nm He-Ne laser, has been developed for the simultaneous measurment of current and voltage. The Magnetic stress for the current and the piezoelectric effect for voltage are utilized. It is found that the detector output voltage is proportional to the square of the applied current and the frequency of the output is twice of that of the applied current.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.465-466
• /
• 2002

In any mechanical system consisting of gears, shafts and/or bearings, the majority of metallic particles deposited into and carried by the lubrication system originate from the deterioration of oil-wetted working surfaces, even in proper lubrication system, due to failure mechanism (s) such as wear, fatigue and fretting corrosion. Determination of the point at which transition from normal to abnormal or to actual damage occurs has become a focus of attention in research activities for years, because it has been recognized that reliable, economic operation can be achieved through appropriate preventative measures. Known collectively from 'all size wear debris analysis' as early failure detection, the methods of testing for damage differ considerably, range from a micron or a submicron size debris analysis to Magnetic Chip Detector (MCD) ferrous debris analysis. This paper will be focused on the utilization of the low-cost analysis techniques for evaluation of industrial machinery condition.

• 한국화재소방학회논문지
• /
• 제14권2호
• /
• pp.1-6
• /
• 2000

가연물 연소시 불꽃의 복사에너지 Spectrum분석을 통하여 태양광, 인공광과 Flame의 spectrum특성해석으로 불꽃감지기술을 정립하였다. IR파장대의 복사에너지를 감지하기 위해 초전형 감지소자개발로 PZT소자를 개발하였으며, Band Pass Filter와 회로안정화기술을 적용한 적외선 불꽃화재감지기를 개발하였다. 시작품의 성능은 신뢰성 있는 적외선 불꽃감지기로 검증이 되었으며, 연구결과는 휘발유, 석유화학제품의 연소시 발생되는 불꽃을 조기에 감지하는 복사에너지 감지기가 개발되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.699-702
• /
• 2002

A DC current sensor is disclosed in which two pairs of saturable cores are provided so as enclose a conductor carrying a direct current to be measured. On each of the saturable cores, a bias winding, a feedback winding and an output winding are wound. Circuit for detection of an asymmetry in the magnetization current, generated by a reference alternating voltage, in a signal-conditioner. The reference alternating voltage is fed to the respective series circuits such that no resultant induction current is induced in the modulating current. The voltages over the resistor form input signals for two peak value detectors, the strength of the output signal of which represents the degree of asymmetry of magnetization current. This paper describes the development a DC current sensor and its signal-conditioner.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.407-410
• /
• 2002

A three-phase 6/8 structure Switched Reluctance Motor drive, the construction of the stator and the rotor. in the motor, the scheme of the rotor position detector and the main circuit of the power converter are described. The range of the stator pole arc factor and the rotor pole arc factor of the motor are analyzed in the linear region. The optimum range of the stator pole arc factor and the optimum range of the turn-off angle of the main switches in the power converter are given with the 2-D finite element electro-magnetic field calculation of the motor and the nonlinear simulation. Test jesuits of the developed prototype are discussed.

• 비파괴검사학회지
• /
• 제10권2호
• /
• pp.32-37
• /
• 1990

A computer controlled 5 axis ultrasonic testing system is developed in order to detect flaws in special parts with complex shape. The various kinds of ultrasonic test can be performed automatically using computer program which was developed by DHI(Daewoo Heavy Industries Ltd.). By use of this computer program, the detector location can be programed and the amplitude signal of echo can be processed digitally. The test results can be plotted graphically on a high resolution display monitor in real time base. The test data can be also saved in magnetic memory devices(HDD or FDD) as well as in the form of hard copy through color printer. The computer software contains c- scan, c+a scan processing programs as well as statistical analysis for test data.

• 한국전기전자재료학회논문지
• /
• 제15권12호
• /
• pp.1045-1053
• /
• 2002

This paper describes characteristics of the developed current sensor by means of two identically wound magnetic cores forming a clamp like for measurement of a low DC, or AC current. This sensor consists of peak value detectors, a sensor of an electrically compensated current transformer type, a reference alternating voltage, Precision measuring circuits to measure the output signals of sensor with harmonics, and can be measured up to 2 A at DC, or AC current. The current sensor shows a measurement accuracy of less than 0.3% in the frequency range 40 Hz - 10 HBz. The resolution and sensitivity of the sensor were evaluated 0.1 mA and 10 mV/mA, respectively.

• Journal of Magnetics
• /
• 제7권1호
• /
• pp.4-8
• /
• 2002

The magnetoresistance (MR) and the magnetization reversal of a lateral spin-injection device based on a spin-polarized field effect transistor (spin FET) have been investigated. The device consists of a two-dimensional electron gas (2DEG) system in an InAs single quantum well (SQW) and two ferromagnetic $(Ni_{80}Fe_{20})$ contacts: all injector (source) and a detector (drain). Spin-polarized electrons are injected from the first contact and, after propagating through the InAs SQW are collected by the second contact. By engineering the shape of the permalloy contacts, we were able to observe distinct switching fields $(H_c)$ from the injector and the collector by using scanning Kerr microscopy and MR measurements. Magneto-optic Kerr effect (MOKE) hysteresis loops demonstrate that there is a range of magnetic field (20~60 Oe), at room temperature, over which the magnetization in one contact is aligned antiparallel to that in the other. The MOKE results are consistent with the variation of the magnetoresistance in the spin-injection device.